SURFACE MOUNT PACKAGE EMULATION 이미지 확대 보기
  • SURFACE MOUNT PACKAGE EMULATION

SURFACE MOUNT PACKAGE EMULATION

공유
짧은설명
Surface Mount Package Emulation
판매가
견적문의 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
0원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000120997
제조사
Ironwood Electronics

상품상세정보


Ironwood has developed the industry's widest range of interconnection adapters for testing and socketing of SMT devices. We offer SMT bases and thru-hole adapters for BGA, QFN, MLF, PLCC, QFP, and SOIC packages. SMT Package Emulators provide highest speed, reliability, and lowest insertion force.

Standard Parts


Technical Documents

 

SMT Adapters - Reliable, Easy to plug, High Speed

Ironwood's SMT package emulation adapters are often called "surface mount feet" or "emulator bases". These adapters provide access and interconnections to surface mount lands. Typically, the adapters are soldered to the target board in place of the IC device and provide a pluggable array of pins interface for sockets, probing adaptors, package converters, and even board-to-board connections. These adapters are often utilized as a base for many of our probing adaptor products. We constantly innovate to provide the most reliable, cost effective interfaces available. For example, many of our PLCC, QFP and SOIC emulation bases use our proprietary shaped solder techniques, replacing expensive, and often fragile, J-lead and Gull Wing leads. Shaped solder parts are easily fluxed and reflowed onto the target system. Our emulator bases can present either a male or female interface at 1.27mm or 1mm or 0.8mm pitch gold plated array pins for pluggable connection.

QFN/MLF Surface Mount Emulator Bases

Patented QFN SMT Feet provide a reliable method for interconnecting to QFN pads on the target PCB. These high performance adapters have the same pad configuration as the QFN IC being emulated and a female socket array to which various adapters can be plugged. The SF-QFN/MLF small footprint Surface Mount Package Emulator Feet for all sizes of QFN/MLF, pitch ranging from 0 .4mm to 0.65 and many body sizes. These devices use patented technology to achieve a reliable and chip size SMT QFN/MLF adapter. The SF-QFN/MLF has pads on the bottom that precisely match the pin layout for the QFN/MLF package including the E-pad or heat sink pad in the center of the pattern. This allows connection to a QFN/MLF land pattern of target board and provide a set of interconnects available for probing or connecting to another assembly. The user simply solders the SF-QFN/MLF adapter using the same solder reflow and attachment methods used for a QFN/MLF IC. The SF-QFN/MLF adapter is the same size as the QFN/MLF IC in the XY dimension and only 3.3 mm high. The top of the adapter after being attached to the target consists of female, machined socket pins with complete gold plating for maximum reliability.

 

QFN/MLF adapter to receive IC devices

The target IC is soldered to the LS-QFN/MLF. The two parts (SF and LS) are interconnected together with gold plated machined pins enabling highest reliability for emulation, probing, or interconnection of the QFN/MLF device. Many sizes of QFN/MLF SMT adapters are shown in the table.

 

PLCC SMT Emulator Bases

Our PLCC surface mount feet utilize J-leads to attach to the target system's SMT lands. They present an array of gold plated, 0.05" pitch MGA "mini-grid" pins for top side connection. There are various part profiles and pin length configurations available.

 

QFP Surface Mount Emulator Bases

We offer more than 150 surface mount feet for QFP interfaces. Our proprietary shaped solder technology, gull wing leads, or leadless systems are employed to attach the part to the SMT lands on the target board. These parts present our MGA (.05" pitch "mini-grid") array of gold plated pins to provide pluggable connections.

 

SOIC Surface Mount Emulator Bases

Our SOIC surface mount feet are offered in leadless (-L), J-leaded (-J), or bottom termination (-K) variations. When soldered to the target SMT lands, they create a pluggable connection by presenting an array of gold plated pins. Some of these parts utilize our smallest 0.8mm pitch "micro-grid array" technology.

배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기SURFACE MOUNT PACKAGE EMULATION

SURFACE MOUNT PACKAGE EMULATION
  • SURFACE MOUNT PACKAGE EMULATION
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

TODAY VIEW

0/2
상단으로 이동