DCC 이미지 확대 보기
  • DCC

DCC

공유
짧은설명
AD/DA Data Conversion Card / P0035
판매가
962,500 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
0원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000121095
제조사
Terasic Technologies
DCC
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보


Overview

The AD/DA Data Conversion Card was created to provide a set of Analog to Digital and Digital to Analog interfaces including an Audio CODEC interface. The High Speed Mezzanine Card (HSMC) can be used to develop DSP applications with Altera Development boards and Terasic Development boards (e.g.DE3) that feature the HSMC connector.

Specification

  • One High Speed Mezzanine Card (HSMC) connector for interface conversion, which is fully compatible with Altera Development boards and Terasic DE3 host boards.
  • External Clock In / Out Interface
  • Two 14-bit Analog to Digital (A/D) converter channel with 150MSPS
  • Two 14-bit Digital to Analog (D/A) converter channel with 250MSPS
  • One Audio CODEC with Line-In, Line-Out, MIC and Headphone
  • Size :145mm x 80mm x 18mm (L x W x H)

Block Diagram

 

Applications

  • Low cost oscilloscope and pattern generator
  • Communication Transceiver
  • Digital signal processing
  • Platform for various modulation techniques
  • Record and playback sound

Connectivity

   AD/DA Data Conversion Card

  • AD/DA Data Conversion Card connection to the Altera Stratix III Development Board




  • AD/DA Data Conversion Card connection to the Altera Cyclone III Development Board
  • AD/DA Data Conversion Card connection to the Altera DE3
    Note. An adapter (SFF) is required to connect ADA-HSMC with DE3. It is bundled in DE3 kit.

  • AD/DA Data Conversion Card connection to the Altera DE4
    Note. One adapters (HFM2) required to connect DVI-HSMC with DE4. They are bundled in DE4 kit.

  • AD/DA Data Conversion Card connection to the Altera DE2-115


Resources

Documents

 

Title Version Size(KB) Date Added Download
Data Conversion HSMC reference manual - 712 2009-06-24

 

CD-ROM

 

Title Version Size(KB) Date Added Download
AD/DA Data Conversion Card CD-ROM - 2010-05-24

 

 

Transmission Demo

The AD/DA Data Conversion CD includes a reference design which contains two sine waves that are generated by two instances of the Altera numerically controlled oscillator (NCO) MegaCore. One of these oscillators is running at 10 times the frequency of the other, but both of them have the same amplitude with each one covering 13 bits of dynamic range. From these blocks, the two sine waves output are converted from two’s complement binary to unsigned binary format which then are added together. The combined sine wave signal of 14-bits dynamic range is sent to a 14-bit D/A converter. The analog output of a D/A converter is connected via SMA Cable with the analog input of a 14-bit A/D converter. The A/D converter’s digital output is looped back to the FPGA device. The A/D is configured by the dip switches to deliver the data in unsigned format. The converted loopback data is captured by an instance of the SignalTap? II logic analyzer in the design for display and analysis.

The following figure below shows a high-level view of the reference design and how it interacts with the D/A and A/D converters on the AD/DA Data Conversion Card in the following sections.

You can use MATLAB software to analyze the data.
The following figure below is generated using SignalTap to capture and analyze data.
 


Kit Contents

The package of the AD/DA Data Conversion Card includes

  • One AD/DA Data Conversion Card
  • One System CD
  • One Accessories package (screw、standoff、Jumper)

배송안내

 이니프로에서 판매하는 모든 제품은 이니프로에서 통관 처리후 우체국 택배로 배송됩니다. 

 국내재고가 있는 경우 결제일로부터 3~4 영업일 안에 국내재고가 없는 경우 결제일로부터 3주 안에 배송됩니다.

 현재 국내재고가 있는지 확인하시려면 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시기 바랍니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 교환 및 반품 처리 요청하면 교환 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 교환 및 반품 처리됩니다.

환불안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 환불 요청하면 환불 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 환불수수료(5천원+판매가의1%)을 제외한 나머지 금액을 환불 처리해 드립니다.

AS안내

 제품 보증 기간이 90일인 제품입니다.

 납품후 90일 이내에는 무상 AS, 90일 이후에는 유상 AS 처리됩니다.

이미지 확대보기DCC

DCC
  • DCC
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

TODAY VIEW

0/2
상단으로 이동