AVR-JTAG-USB-A 이미지 확대 보기
  • AVR-JTAG-USB-A

AVR-JTAG-USB-A

공유
짧은설명
Optoisolated USB JTAG dongle for programming and emulation
정가
44,000
판매가
8,800 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
2,700원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000126440
제조사
Olimex
상품재고
1개
AVR-JTAG-USB-A
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보

FEATURES

  • program ande debugs all AVR flash microcontrollers which have JTAG and are supported by ATJTAGICE, AVR-JTAG-USB is completely analog of ATJTAGICE (AVR Studio thinks it works with original ATJTAGICE). Note this is not AT-JTAGICE-MK2 if you want to work with the newer devices or with debug wire this JTAG will not do the job.
  • optoisolated, so you can debug target boards directly connected to mains 120/220VAC (take care when work with high voltages!)
  • no need for external power supply as takes power from USB port
  • works with targets Vcc 3.0-5.0V
  • uses Atmel's 2x5 pin JTAG connector layout (DIFFERENT FROM ICSP CONNECTOR layout!)
  • works with AVR STUDIO for programming, real time emulation, debugging, step by step program execution, breakpoints, memory dump etc everything all high priced emulators do
  • full emulation of all analog and digital functions, full JTAG programming support
  • upgradable via AVR STUDIO
  • require USB-A male type cable, i.e. you should have USB-A male to USB-A male cable to connect to your computer
  • dimensions 50x40 mm (2x1.6") + 20 cm (8") cable

DOCUMENTS

HARDWARE

  • AVR-JTAG connector (top view)
  • Note: AVR-USB-JTAG needs power from target, this means PIN.4 and PIN.7 of JTAG connector should be wired to target board VCC!

SOFTWARE

  • AVR STUDIO for programming and emulation.
    Please note that ATMEL does not support this product in AVR Studio 5 and ATMEL Studio 6! IMPORTANT NOTE: AVR Studio 4.13 has a bug and the fuses are not read correctly. On our request to Atmel support they confirmed the bug and promised to fix the bug in "AVR Studio 4.13 SP2 JTAGICE Fix"available from http://www.atmel.no/beta_ware/
  • FT232 drivers for your OS download and install to may work with AVR-JTAG-USB via the virtual COM port and AVR Studio
  • For GNU/Linux you can also use http://avarice.sourceforge.net/ Our customer Mr. Aris (thank you) reported succes using the avarice software. A typicial command line for AVR-USB-JTAG and atmega32 controller would be: avarice -1 -j ⁄dev⁄ttyUSB0 -e -P atmega32 -f mycode.hex -p -v

배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기AVR-JTAG-USB-A

AVR-JTAG-USB-A
  • AVR-JTAG-USB-A
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동