XEM6310-LX45

HOME >

Opal Kelly

XEM6310-LX45

짧은설명: USB 3.0 integration module based on the remarkably-capable Xilinx Spartan-6 FPGA

판매가: 951,500원 <관세ㆍ부가세 포함>

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비: 88,000원

택배

방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호

상품코드: 1000126748

제조사: Opal Kelly

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (2)

상품상세정보

The XEM6310 is a USB 3.0 integration module based on the remarkably-capable Xilinx Spartan-6 FPGA. In addition to a high gate-count FPGA, the XEM6310 utilizes the high transfer rate of USB 3.0 for configuration downloads, enabling speedy FPGA configuration and data transfer. With integrated SDRAM, power supplies, and platform flash, the XEM6310 is a worthy successor to the most popular Opal Kelly module.

USB 3.0 SuperSpeed Performance

Real-world measured performance at over 300 MiB/s is possible with the FrontPanel API and SuperSpeed USB 3.0 connections.

On-Board SDRAM

Built with an integrated 128-MiB SDRAM, the XEM6310 has abundant on-board memory for high-performance applications, including data and image acquisition as well as signal processing.

FrontPanel Software Control Panel and API

Opal Kelly's FrontPanel SDK is an easy-to-use, robust API for communication, configuration, and interfacing to your PC. FrontPanel handles all the interaction between your software and the FPGA internals, dramatically reducing the time and effort required to interface to a design.

Prototyping and OEM Integration

The XEM6310 is ideally suited to prototyping systems and integration into OEM devices where a USB interface, flexible hardware solution, or PC software interface would be useful. The XEM6310 can easily be added to a new board design to provide turnkey USB integration with the convenience of the FrontPanel programmer's interface and existing USB drivers.

Product Comparison

Feature	XEM6310-LX45	XEM6010-LX45	XEM6310-LX150	XEM6010-LX150
Interface Measured Performance	USB 3.0 SuperSpeed Up to 315 MB/s	USB 2.0 HighSpeed Up to 38 MB/s	USB 3.0 SuperSpeed Up to 315 MB/s	USB 2.0 HighSpeed Up to 38 MB/s
FPGA Minimum Xilinx Tools Required	XC6SLX45-2 ISE WebPack		XC6SLX150-2 ISE Logic Edition
Slice Architecture	4 6-LUT, 8 DFF
Slices	6,822 (54,576 DFFs)		23,038 (184,304 DFFs)
FPGA RAM	2,088 Kib BlockRAM 401 Kib Distributed		4,824 Kib BlockRAM 1,355 Kib Distributed
MULT / DSP¹	58		180
MCB²	✓		✓
PLLs	✓ (4 CMT)		✓ (6 CMT)
On-Board DDR2 Banks, Width, Peak Bandwidth	128 MiB One, x16, 10 Gb/s
System Flash FPGA Bootable?	128 Mib Yes	-	128 Mib Yes	-
FPGA Flash FPGA Bootable?	128 Mib No	32 Mib Yes	128 Mib No	32 Mib Yes

¹ Spartan-6 DSP blocks include MULT and integrated 48-bit accumulator.
² Spartan-6 MCBs (memory controller blocks) reduce the fabric resources consumed for memory support.

Applications

Image or video capture / processing
Data acquisition
ASIC / hardware-based simulation and verification
Bioinformatics (DNA search and pattern matching)
Digital communications

High-speed USB / FPGA co-processor
Evaluation platform for your product
Custom test equipment
Cryptography
Data Security

Block Diagram

XEM6310 Block Diagram

USB 3.0 SuperSpeed Performance

Measured performance at over 300 MiB/s for real-world data transfers to/from the PC.

Bootable Serial Flash (2x 16MB)

The XEM6310 integrates 16 MiB of on-board serial Flash for standalone FPGA booting and miscellaneous nonvolatile memory and a separate 16 MiB serial Flash for exclusive FPGA use.

128 MiB DDR2

Integrated 128-MiByte DDR2 provides plenty of on-board memory for high-performance applications, including image capture and data acquisition.

Switching Power Supplies

High-efficiency switching power supplies provide stable, dependable power to the FPGA. In most applications, there is enough extra juice to also supply your board.

Features & Specifications

Xilinx Spartan-6 (XC6SLX45-2FGG or XC6SLX150-2FGG)
2x 32-MiB serial flash (Numonyx N25Q128A)
128-MiByte DDR2 (Micron MT47H64M16HR)
Small form-factor -- smaller than a credit card at 75mm x 50mm x 15.9mm (2.95" x 1.97" x 0.63")
High-speed USB 3.0 interface (Cypress FX3) for configuration and data transfer
Measured performance up to 315 MiB/s
Self-powered by external DC source
Low-jitter 100 MHz clock oscillator
Eight LEDs
Two 80-pin 0.8mm Samtec board-to-board connectors (BSE-040)
Over 110 user I/O and 4 GCLK pins on expansion connectors
Independent access to VCCO bank voltages
JTAG pins available on the expansion connectors
Full FrontPanel virtual control panel support
Complete Application Programmer's Interface (API) in C, C++, C#, Ruby, Python, and Java

Note: Firmware source code is not included. Full documentation on designing the XEM6310 into your application is contained in the XEM6310 User's Manual and FrontPanel User's Manual. Please see the Library items on this page.