XEM6001

HOME >

Opal Kelly

XEM6001

짧은설명: integration module based on a Xilinx Spartan-6 FPGA (XC6SLX16-2FTG256C)

판매가: 507,100원 <관세ㆍ부가세 포함>

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비: 88,000원

택배

방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호

상품코드: 1000126752

제조사: Opal Kelly

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

The Opal Kelly XEM6001 is an integration module based on a Xilinx Spartan-6 FPGA (XC6SLX16-2FTG256C). In addition to a high gate-count FPGA, the XEM6001 utilizes the high transfer rate of USB 2.0 for configuration downloads, enabling an almost instant reprogramming of the FPGA. The XEM6001 features flexible clocking with a multi-output clock generator that can generate clock frequencies from 1 MHz to 150 MHz. If higher frequencies are needed, the clock multipliers in the FPGA can be used.

Prototyping and OEM Integration

The XEM6001 is ideally suited for prototyping and integration into OEM devices where a USB interface, flexible hardware solution, or PC software interface would be useful. The XEM6001 can easily be added to a new board design to provide turnkey USB integration with the convenience of Opal Kelly's FrontPanel programmer's interface and existing USB drivers.

Students and Hobbyists

The XEM6001 is also great for students and hobbyists who would like to learn more about FPGAs and investigate their possibilities through the convenience of a PC. Its low cost, small size, and large number of general purpose input/output pins makes it ideal for integration into a broad range of projects.

Applications

Test fixtures
Rapid hardware prototyping
Data acquisition

Student / hobbyist FPGA module
Evaluation platform for your product
Custom test equipment

Customer Deployments

Test system for laser toner remanufacturing equipment
Test chips used in power modules
Test equipment for infrared cameras
Custom boards for aerospace
X-ray and gamma-ray radiation detectors

Camera evaluation and development systems
Semiconductor evaluation and testing
3D imaging cameras
Flight simulators
Sonar signal emulation system
Laser satellite tracking system

Block Diagram

XEM6001 Block Diagram

FrontPanel Virtual Interface

Virtual interface elements such as buttons, LEDs, and hex displays make cumbersome "I/O Boards" a thing of the past.

32 Mb SPI Serial Flash

A 32-Mbit SPI Serial Flash device is included for FPGA configuration or general data storage. An on-board switch lets you choose between USB or Flash for FPGA configuration, enabling full stand-alone operation. USB communication via FrontPanel is available in either mode.

Multi-output PLL

The on-board PLL provides flexible clocking to the FPGA and expansion connectors.

Abundant I/O

86 I/Os and 6 CLK pins are all arranged on a common 0.1" grid for easy prototyping.

Bus- or Self-Powered

The XEM6001 comes configured as a bus-powered device. With the removal of a resistor, you can configure the module to be self-powered.

Features & Specifications

Small form-factor -- credit-card sized (3.5" x 2.0" x 0.61" / 88.9mm x 50.8mm x 15.4mm)
High-speed USB 2.0 interface for downloading and control
Bus-powered or self-powered operation
Clock generator PLL for programmable clock rate
32 Mb SPI flash for general storage or standalone FPGA configuration
Four pushbuttons
Eight LEDs
Two 50-pin dual-row 0.1" headers (37 I/Os, including 9 GCLKs)
Single 20-pin dual-row 0.1" header (16 I/Os, including 4 GCLKs)
JTAG header
All four headers arranged on a common 0.1" grid
Full FrontPanel virtual control panel support
Transfer rates of up to 36 MBytes/second between the PC and FPGA
Complete Application Programmer's Interface (API) in C, C++, C#, Ruby, Python, and Java

Important Note: Firmware source code is not included with the XEM6001. Of course, full documentation on designing the XEM6001 into your application is included. Please see the Library items on this page.