XEM5010-50M256 이미지 확대 보기
  • XEM5010-50M256

XEM5010-50M256

공유
짧은설명
new integration module based on a XC5VLX50 Xilinx Virtex-5 FPGA
판매가
2,497,000 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
88,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000126754
제조사
Opal Kelly

상품상세정보

The Opal Kelly XEM5010 is a new integration module based on a XC5VLX50 Xilinx Virtex-5 FPGA. In addition to a high gate-count, high-performance FPGA, the XEM5010 utilizes the high transfer rate of USB 2.0 for configuration downloads, enabling an almost instant reprogramming of the FPGA.

FrontPanel Application and API

Opal Kelly's FrontPanel software interface is an easy-to-use, robust API for communication, configuration, and interfacing to your PC. FrontPanel handles all the interaction between your software and the FPGA internals, dramatically reducing the time and effort required to interface to a design.

Prototyping and OEM Integration

The XEM5010 is ideally suited for product prototyping and integration into OEM devices where a USB interface, flexible hardware solution, or PC software interface would be useful. The XEM5010 can easily be added to a new board design to provide turnkey USB integration with the convenience of Opal Kelly's software programmer's interface and existing USB drivers.

Xilinx WebPack Support

The Virtex-5 device on the XEM5010 is fully-supported by the latest Xilinx WebPack toolchain (free!).  

Applications

 

  • Image or video capture / processing
  • Data acquisition
  • Digital communications
  • ASIC / hardware-based simulation and verification
  • Bioinformatics (DNA search and pattern matching)
  • High-speed USB/FPGA co-processor
  • Evaluation platform for your product
  • Custom test equipment
  • Cryptography
  • Data Security

 

Block Diagram

XEM5010 Block Diagram

256 MiB DDR2 SDRAM

Two completely independent 128-MByte DDR2 SDRAMs are great for high-performance applications where separate memory busses are required. Total memory bandwidth is 2.128-GB/s or 17.024-Gb/s.

32 Mb SPI Serial Flash

An 32-Mbit SPI Serial Flash device is included for non-volatile storage of both FPGA configuration and post-configuration data.

36 Mb Synchronous SRAM

A wide-bus (36-bit), 1Mx36 SSRAM is directly connected to the FPGA for high-speed, synchronous, static storage.

High-Efficiency Power

The XEM5010 includes high-efficiency switching power supplies for the FPGA and support devices, reducing your design burden and project timeline.

 

Features & Specifications

  • Xilinx Virtex-5 (XC5VLX50-1FFG676C)
  • 256-MByte DDR2 SDRAM (2x Micron MT47H64M16)
  • 32-Mbit Serial Flash (ST Microelectronics M25P32)
  • 36-Mbit SSRAM (1Mx36)
  • Small form-factor -- 85mm x 61mm x 17.6mm (3.35" x 2.40" x 0.69")
  • High-speed USB 2.0 interface (Cypress FX2LP - CY68013A) for downloading and control
  • Self-powered by external DC source
  • Very low jitter 100 MHz LVDS clock oscillator
  • Four LEDs
  • Two 120-pin 0.8mm Samtec high-performance board-to-board connectors (QSE-060)
  • Up to 200 user I/O (100 differential pairs)
  • Independent access to VCCO bank voltages
  • JTAG pins available through expansion connectors
  • Full FrontPanel virtual control panel support
  • Complete Application Programmer's Interface (API) in C, C++, C#, Ruby, Python, and Java

Note: Firmware source code is not included. Of course, full documentation on designing the XEM5010 into your application is included. Please see the Library items on this page.

배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기XEM5010-50M256

XEM5010-50M256
  • XEM5010-50M256
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

TODAY VIEW

0/2
상단으로 이동