The Opal Kelly XEM3005-1200M32P is an FPGA integration module based on a 1,200,000-gate Xilinx Spartan-3E FPGA. In addition to a high gate-count FPGA, the XEM3005 utilizes the high transfer rate of USB 2.0 for configuration downloads, enabling an almost instant reprogramming of the FPGA.
FrontPanel Software for Turnkey PC-to-Hardware Interface
FrontPanel™ software makes it a breeze to interface your PC software to your hardware with the XEM3005. Using the FrontPanel API, your software can configure and communicate with the FPGA over a high-speed USB 2.0 interface. Software/hardware integration has never been easier.
Prototyping and OEM Integration
The entire Opal Kelly XEM family is ideally suited to prototype systems and for integration into OEM devices where a USB interface, flexible hardware solution, or PC software interface would be useful. The module can easily be added to a new board design to provide turnkey USB integration with the convenience of Opal Kelly's FrontPanel API and existing USB drivers.
32 MB SDRAM
Integrated 32-MByte SDRAM provides abundant on-board memory for high-performance applications, including image capture and data acquisition.
4 Mb SPI Serial Flash
A 4-Mbit SPI Serial Flash device is included for FPGA configuration or general data storage. An on-board switch lets you choose between USB or Flash for FPGA configuration, enabling full stand-alone operation. USB communication via FrontPanel is available in either mode.
The on-board PLL provides flexible clocking to the FPGA and expansion connectors.
Just Add Power
You provide +3.3v and +1.2v power through the expansion connectors or a 0.1" header on-board. This decreases overall system cost by eliminating redundant supplies.
Note: We recommend that first-time buyers also purchase the BRK3005 which allows the XEM3005 to operate in bus-powered mode.
Features & Specifications
- Smaller than a credit card at 42mm x 62mm x 7.43mm (1.65" x 2.44" x 0.29")
- Compact type Mini-B USB connector
- Xilinx Spartan-3E (XC3S1200E-4FTG256)
- 4-Mb Serial SPI Flash for configuration storage and standalone operation
- 32-MB SDRAM (Micron MT48LC16M16).
- High-speed USB 2.0 interface for configuration and control
- FrontPanel-3 Firmware
- Multi-output clock generator (Cypress CY22150)
- Four LEDs
- Switch-selectable boot option: Flash or USB
- Two 80-pin 0.8mm board-to-board connectors (Samtec BSE-040)
- 67 user I/O, 36 Input and 2 GCLK pins available
- Independent access to one VCCO bank voltage
- JTAG pins available on a 2mm header as well as the expansion connectors.
- Full FrontPanel virtual control panel support.
- Complete Application Programmer's Interface (API) in C, C++, C#, Ruby, Python, and Java.
Important Note: Firmware source code is not included. Of course, full documentation on designing the XEM3005 into your application is included. Please see the Library items on this page.
교환 및 반품안내
● 제조사별로 교환 정책이 상이하니 하단 고객센터 연락처로 문의 주시기 바랍니다.
● 제조사별로 환불 정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다.
● 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다.
글 작성시 설정한 비밀번호를 입력해 주세요.확인
상품이 장바구니에 담겼습니다.