XEM3010-1500P

HOME >

Opal Kelly

XEM3010-1500P

짧은설명: integration module based on a 1,500,000-gate Xilinx Spartan-3 FPGA (Commercial Version)

판매가: 1,518,000원 <관세ㆍ부가세 포함>

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비: 88,000원

택배

방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호

상품코드: 1000126757

제조사: Opal Kelly

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

The XEM3010 is an integration module based on a 1,500,000-gate Xilinx Spartan-3 FPGA (XEM3010-1500P) or 1,000,000-gate (XEM3010-1000). In addition to a high gate-count FPGA, the XEM3010 utilizes the high transfer rate of USB 2.0 for configuration downloads, enabling speedy FPGA configuration and data transfer. With integrated SDRAM, power supplies, and platform flash, the XEM3010 is the most popular Opal Kelly module.

XEM6010 Spartan-6 Version - Available Now!!

Available now, our new XEM6010 is the Spartan-6 evolution of our incredibly popular XEM3010 and XEM3050 devices. For new designs, the new XEM6010 is recommended. For many older designs, the XEM6010 will drop in with minimal effort. Please see the XEM6010 User's Manual for more details on compatibility with the XEM3010.

On-Board SDRAM

Built with an integrated 32-MiB SDRAM, the XEM3010 has abundant on-board memory for high-performance applications, including data and image acquisition as well as signal processing.

FrontPanel Software Control Panel and API

Opal Kelly's FrontPanel software interface is an easy-to-use, robust API for communication, configuration, and interfacing to your PC. FrontPanel handles all the interaction between your software and the FPGA internals, dramatically reducing the time and effort required to interface to a design.

Prototyping and OEM Integration

The XEM3010 is ideally suited to prototyping systems and integration into OEM devices where a USB interface, flexible hardware solution, or PC software interface would be useful. The XEM3010 can easily be added to a new board design to provide turnkey USB integration with the convenience of the FrontPanel programmer's interface and existing USB drivers.

Note: The -1000 variant is not recommended for new designs. The -1500P variant is preferred.

Applications

Image or video capture / processing
Data acquisition
Digital communications

High-speed USB / FPGA co-processor
Evaluation platform for your product
Custom test equipment

Customer Deployments

Medical device for physical therapy feedback
CMOS image sensor test equipment
Evaluation platform for semiconductors
Bioinformatics co-processors
Radar system - test interface, system integration, field testing
Microprocessor power module testing
Ion beam equipment for inspection/modification of semiconductors

Semiconductor development and testing
Camera interface for IR and LIDAR 3D cameras
Equipment for analyzing satellite imagery
Prototyping of image processing algorithms and display timing controllers for smart phones
Design of equipment for mineral exploration
University research
University classroom design projects

Block Diagram

XEM3010 Block Diagram

32 MB SDRAM

Integrated 32-MByte SDRAM provides plenty of on-board memory for high-performance applications, including image capture and data acquisition.

Xilinx Platform Flash

If you need standalone operation, Xilinx Platform Flash can configure the FPGA on startup and still allow you to communicate over USB.

Multi-output PLL

The on-board PLL provides flexible clocking to the FPGA and expansion connectors.

Switching Power Supplies

High-efficiency switching power supplies provide stable, dependable power to the FPGA. In most applications, there is enough extra juice to also supply your board.

Features & Specifications

Xilinx Spartan-3 (XC3S1000-4FG320 or XC3S1500-4FG320)
Optional Xilinx Platform Flash PROM for configuration storage and standalone operation
32-MByte SDRAM (Micron MT48LC16M16)
Small form-factor -- smaller than a credit card at 75mm x 50mm x 15.9mm (2.95" x 1.97" x 0.63")
High-speed USB 2.0 interface (Cypress FX2LP - CY68013A) for downloading and control
Self-powered by external DC source
Multi-PLL, multi-output clock generator (Cypress CY22393)
Eight LEDs and two pushbuttons
Two 80-pin 0.8mm Samtec board-to-board connectors (BSE-040)
Over 110 user I/O and 4 GCLK pins on expansion connectors
Independent access to VCCO bank voltages
Optional resistors for digitally-controlled impedance (DCI)
JTAG pins available on a 2mm header as well as the expansion connectors
Full FrontPanel virtual control panel support
Complete Application Programmer's Interface (API) in C, C++, C#, Ruby, Python, and Java

Important Note: Firmware source code is not included. Of course, full documentation on designing the XEM3010 into your application is included. Please see the Library items on this page.