상품상세정보
● Overview
The MAX 10 NEEK from Terasic is a full featured embedded evaluation kit based upon the MAX10 family of Altera FPGAs. It offers a comprehensive design environment with everything embedded developers need to create a processing based system. The MAX 10 NEEK delivers an integrated platform that includes hardware, design tools, intellectual property and reference designs for developing a wide range of audio, video and many other exciting applications.
The fully integrated kit allows developers to rapidly customize their processor and IP to suit their specific needs, rather than constraining their software around the fixed feature set of the processor. The all-in-one embedded solution, the MAX 10 NEEK, combines a 5-point LCD touch panel and digital image module that provides developers an ideal platform for multimedia applications, making the best use of the parallel nature of FPGAs.
● Specification
FPGA Device
- MAX 10 NEEK 10M50DAF484C6G Device
- Integrated dual ADCs, each ADC supports 1 dedicated analog input and 8 dual function pins
- 50K programmable logic elements
- 1,638 Kbit M9K Memory
- 5,888 Kbits user flash memory
- 144 18 × 18 Multiplier
- 4 PLLs
Programming and Configuration
- On-board
- Optional JTAG direct via 10-pin header
- One slide switch for dual boot image selection
Memory Devices
- 64Mx16 1 Gb DDR3 SDRAM
- 128Mx8 1 Gb DDR3 SDRAM
- 512Mb quad serial peripheral interface (quad SPI) flash memory
- Micro SD card socket
Communication and Expansion
- Gigabit Ethernet PHY with RJ45 connector
- UART to USB
- PS/2 mouse/keyboard connector
- 2x6 TMD(Terasic Mini Digital) Expansion Header
Display
- 800x480 Color LCD with 5-point Capacitive-touch
Audio
- 24-bit CD-quality audio CODEC with mic-in, line-in, line-out jacks
Video Input
- HDMI video input
- 8M pixel MIPI CS2 color camera input
Analog
- Two MAX 10 FPGA ADC SMA inputs
- Potentiometer input to ADC
- On-Board MIC input to ADC
- 2x10 Header for MAX 10 FPGA ADC inputs
- One DAC output
Sensors
- Humidity and temperature sensor
- Light sensor
- Accelerometer
- Power monitor
Clocking for users
- One 10 MHz single-ended, external oscillator clock source
- Three 50 MHz single-ended, external oscillator clock source
Switches, Buttons and LEDs
- Five push-buttons
- Ten slide switches
- Ten red user LEDs
- Two 7-segment displays
Power
- 5V/3A DC input
● Layout
•Size：190x140x 20 mm
● Resources
Documents
Title
Version
Size(KB)
Date Added
Download
Quick Start Guide
1.0.0
2354
2015-07-22
User Manual
1.0.0
8621
2015-07-22
My_First_NiosII
1.0.0
5727
2015-07-21
My_First_Fpga
1.0.0
2942
2015-07-08
CD-ROM
Title
Version
Size(KB)
Date Added
Download
MAX 10 NEEK CD-ROM
1.0.1
2015-07-24
Please note that all the source codes are provided "as is". For further support or modification, please contact Terasic Support and your request will be transferred to Terasic Design Service.
More resources about IP and Dev. Kit are available on Altera User Forums.
Demonstrations
- my_first_fpga
- my_first_nios
- on-board microphone + max 10 on die adc
- on-board potentiometer + max 10 on die adc
- Waveform generator with DAC
- NIOS II based ddr3 test
- RTL based power monitor
- NIOSII based power monitor
- PS2 mouse
- Ethernet socket server
- Music player by using the MicoSD card and audio codec.
- Communicate with PC by using uart to usb chip.
- Accelerometer and light-sensor
- Humidify and temperature sensor
- MIPI CSI-2 Camera
- Hdmi receiver
- Painter for 5-point touch display
MAX 10 NEEK Tools and Design Examples
-
System Builder
A powerful tool that comes with the MAX 10 NEEK. This tool allows users to create customizable Quartus II projects depending on their requirements for the MAX 10 NEEK. The top-level design file, pin assignments, and I/O standard settings for the MAX 10 NEEK board will be generated automatically from this tool. In addition, through the TMD connectors you can select various daughter cards in conjunction with the MAX 10 NEEK from the System Builder.
-
Painter (Screenshot)
This reference design showcases MAX 10 NEEK's 5-point capacitive touch-screen capabilities. Supporting 5-point coordinates and multi-touch gestures, this demonstration allows users to paint with 5 fingers. Gestures that are drawn on the canvas are displayed in the gesture indicator box over the left of the color palette.
-
Camera (Screenshot)
This example shows how to decode the video received with the on-board MIPI CSI-2 camera. The decoded video is displayed on the 7" LCD of MAX 10 NEEK.
-
ADC MIC (Screenshot)
This example shows how to retrieve the audio waveform from the on-board microphone. The waveform is displayed on the 7" LCD of MAX 10 NEEK.
-
G-Sensor
This design utilizes an embedded NIOS II CPU to communicate with the on-board digital accelerometer and the ambient light sensor. The accelerometer output is visualized as a level display, and the readings for the ambient light are displayed on the 7" LCD of MAX 10 NEEK.
-
Temperature/Humidity (Screenshot)
This design utilizes an embedded NIOS II CPU to communicate with the on-board humidity/temperature sensor. The reading values will be displayed on the 7" LCD of MAX 10 NEEK.
● Kit Contents
Documents
| Title | Version | Size(KB) | Date Added | Download |
|---|---|---|---|---|
| Quick Start Guide | 1.0.0 | 2354 | 2015-07-22 | |
| User Manual | 1.0.0 | 8621 | 2015-07-22 | |
| My_First_NiosII | 1.0.0 | 5727 | 2015-07-21 | |
| My_First_Fpga | 1.0.0 | 2942 | 2015-07-08 | |
CD-ROM
| Title | Version | Size(KB) | Date Added | Download |
|---|---|---|---|---|
| MAX 10 NEEK CD-ROM | 1.0.1 | 2015-07-24 | |
More resources about IP and Dev. Kit are available on Altera User Forums.
Demonstrations
- my_first_fpga
- my_first_nios
- on-board microphone + max 10 on die adc
- on-board potentiometer + max 10 on die adc
- Waveform generator with DAC
- NIOS II based ddr3 test
- RTL based power monitor
- NIOSII based power monitor
- PS2 mouse
- Ethernet socket server
- Music player by using the MicoSD card and audio codec.
- Communicate with PC by using uart to usb chip.
- Accelerometer and light-sensor
- Humidify and temperature sensor
- MIPI CSI-2 Camera
- Hdmi receiver
- Painter for 5-point touch display
MAX 10 NEEK Tools and Design Examples
-
System Builder
A powerful tool that comes with the MAX 10 NEEK. This tool allows users to create customizable Quartus II projects depending on their requirements for the MAX 10 NEEK. The top-level design file, pin assignments, and I/O standard settings for the MAX 10 NEEK board will be generated automatically from this tool. In addition, through the TMD connectors you can select various daughter cards in conjunction with the MAX 10 NEEK from the System Builder.
-
Painter (Screenshot)
This reference design showcases MAX 10 NEEK's 5-point capacitive touch-screen capabilities. Supporting 5-point coordinates and multi-touch gestures, this demonstration allows users to paint with 5 fingers. Gestures that are drawn on the canvas are displayed in the gesture indicator box over the left of the color palette.
-
Camera (Screenshot)
This example shows how to decode the video received with the on-board MIPI CSI-2 camera. The decoded video is displayed on the 7" LCD of MAX 10 NEEK.
-
ADC MIC (Screenshot)
This example shows how to retrieve the audio waveform from the on-board microphone. The waveform is displayed on the 7" LCD of MAX 10 NEEK.
-
G-Sensor
This design utilizes an embedded NIOS II CPU to communicate with the on-board digital accelerometer and the ambient light sensor. The accelerometer output is visualized as a level display, and the readings for the ambient light are displayed on the 7" LCD of MAX 10 NEEK.
-
Temperature/Humidity (Screenshot)
This design utilizes an embedded NIOS II CPU to communicate with the on-board humidity/temperature sensor. The reading values will be displayed on the 7" LCD of MAX 10 NEEK.
● Kit Contents
- MAX 10 NEEK Board
- MAX 10 NEEK Quick Start Guide
- Type A to Mini-B USB Cable(1.8mm)
- Power DC Adapter(5V/3A)
- MicroSD Card
배송안내
● 이니프로에서 판매하는 모든 제품은 이니프로에서 통관 처리후 우체국 택배로 배송됩니다.
● 국내재고가 있는 경우 결제일로부터 3~4 영업일 안에 국내재고가 없는 경우 결제일로부터 3주 안에 배송됩니다.
● 현재 국내재고가 있는지 확인하시려면 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시기 바랍니다.
● 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.
교환 및 반품안내
● 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 교환 및 반품 처리 요청하면 교환 가능합니다.
● 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.
● 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 교환 및 반품 처리됩니다.
환불안내
● 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 환불 요청하면 환불 가능합니다.
● 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.
● 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 환불수수료(5천원+판매가의1%)을 제외한 나머지 금액을 환불 처리해 드립니다.
AS안내
● 제품 보증 기간이 90일인 제품입니다.
● 납품후 90일 이내에는 무상 AS, 90일 이후에는 유상 AS 처리됩니다.
이미지 확대보기MAX 10 NEEK
비밀번호 인증
글 작성시 설정한 비밀번호를 입력해 주세요.
장바구니 담기
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
찜 리스트 담기
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?
CS CENTER
02-6956-9010문의 및 요청 사항을 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시면 최대한 빨리 처리해 드리도록 하겠습니다.
BANK INFO
1005-702-341569우리은행
예금주 : 이니프로주식회사
