The Terasic Multi-Touch LCD Module Second Edition (MTL2) is an all-purpose capacitive touch-screen for your FPGA applications. It provides 5-point Multi-Touch support and a 7" color display LCD with 800x480 resolution. An IDE cable with an IDE-to-GPIO adapter (ITG) is provided in the kit to interface MTL2 with various Terasic FPGA development boards through a 2x20 GPIO interface.
The kit provides everything that is needed to develop multimedia applications using a digital Multi-Touch panel. Also to expedite your designs, complete reference designs and the demonstration source codes for implementing a photo viewer and a color painter are also available for download.  

Features


• LCD
• 7-inch panel
• 800x480 pixels
• 24-bits color depth
• Multi-Touch
• Capacitive Touch Screen
• 5-point Multi-Touch Support
• I2C interface
• Gesture Support
• Interface
• IDE Connector
• 2x20 GPIO connector with ITG (IDE to GPIO) adapter
• Gesture Table
• One Point Gesture



• Two Points Gesture



 


Connectivity



The MTL2 can be connected to the Terasic FPGA Development Boards where a 2x20 GPIO expansion connector is available, here are a few examples:

• Connect to DE2-115



• Connect to DE1-SoC



• Connect to DE0-Nano-SoC



• Connect to DE0-CV

• Top View of MTL2


• Bottom View of MTL2

Size：188*130*20 mm

IDE to GPIO Adapter (ITG)


• Top View of ITG Adapter


• Bottom View of ITG Adapter


Size：38*124*20 mm
 

Demonstrations



Title	Version	Size(KB)	Date Added	Download
MTL2 User Manual	1.0	11075	2017-03-09

Documents



Title	Version	Size(KB)	Date Added	Download
MTL2 User Manual	1.0	11075	2017-03-09

CD-ROM



Title	Version	Size(KB)	Date Added	Download
MTL2 User Manual	1.0	11075	2017-03-09

Please note that all the source codes are provided "as-is". For further support or modification, please contact Terasic Support and your request will be transferred to Terasic Design Service. More resources about IP and Dev. Kit are available on Altera User Forums.

Reference Designs



The MTL2 System CD includes the two following reference designs:


ePhoto


• ePhoto Demonstration Setup




• Select photos using left or right gesture




• Zoom into photos with a zoom gesture





Painter



This demo shows how to use the Multi-Touch panel and LCD to implement a painting application based on the Altera Qsys and Altera VIP suite.

The Multi-Touch LCD Module package includes:



1. Multi-touch LCD Module, Second Edition
2. IDE Cable with ITG Adapter
3. 5V Power Supply
4. Four Silicon Footstands

＊if the film is unavailable, please kindly try another link below:
https://youtu.be/qQNDl6Vb3eI