TE0600-03-83I11-A 이미지 확대 보기
  • TE0600-03-83I11-A
  • TE0600-03-83I11-A
  • TE0600-03-83I11-A

TE0600-03-83I11-A

공유
짧은설명
GigaBee XC6SLX150-3, 2 x 128 MByte SDRAM, industrial temperature range
판매가
견적문의 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
143,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617248
제조사
Trenz Electronic

상품상세정보

Product information "GigaBee XC6SLX150-3, 2 x 128 MByte SDRAM, industrial temperature range"

The predecessor of this article is TE0600-03IVF. All changes are in the Product Change Notification (PCN).

The Trenz Electronic TE0600-03-83I11-A GigaBee XC6SLX is an industrial FPGA micromodule integrating a leading-edge Xilinx Spartan-6 LX FPGA, Gigabit Ethernet transceiver (physical layer), two independent banks of 16-bit-wide 128 MBytes DDR3 SDRAM (optional 2 x 512 MByte DDR3 SDRAM in 2 banks), 16 MBytes SPI Flash memory for configuration and operation, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/Os is provided via robust board-to-board (B2B) connectors.

All this on a tiny footprint, smaller than a credit card, at the most competitive price. Modules in 4 x 5 cm form factor are fully mechanically and largely electrically compatible among each other.

All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Sample Applications

  • Cryptographic hardware module
  • Digital signal processing
  • Embedded educational platform
  • Embedded industrial OEM platform
  • Embedded system design
  • Emulation platforms
  • FPGA graphics
  • Image processing
  • IP (intellectual property) cores
  • Low-power design
  • Parallel processing
  • Rapid prototyping
  • Reconfigurable computing
  • System-on-Chip (SoC) development

Key Features

  • High performance Xilinx Spartan-6 LX FPGA, depending on model: LX45, LX100 or LX150
  • FPGA Design Security Solution
  • 10/100/1000 tri-speed Gbit Ethernet transceiver (PHY)
  • 2 independent 16-bit-wide 1 Gbit (128 MByte) DDR3 SDRAM
    (optional: 2 independent 4 Gbit (512 MByte) DDR3 SDRAM in 2 banks)
  • 128 Mbit (16 MByte) SPI Flash memory (for configuration and operation)
  • JTAG port (SPI indirect)
  • FPGA configuration through:
    - B2B connector
    - JTAG port
    - SPI Flash memory
  • Plug-on module with 2 × 100-pin high-speed hermaphroditic strips
  • Up to 52 differential, up to 109 single-ended (+ 1 dual-purpose) FPGA I/O pins available on B2B strips
  • High-efficiency DC-DC switching regulators
  • 125 MHz reference clock signal
  • Single-ended custom oscillator (option)
  • eFUSE bit-stream encryption (LX100 or larger)
  • 1 user LED
  • Evenly-spread supply pins for good signal integrity

Specifications

  • Xilinx Spartan-6 XC6SLX150-3FGG484I FPGA
  • 10/100/1000 Gbit Ethernet transceiver (physical layer) Marvell Semiconductor 88E1111
  • 128 Mbit (16 MByte) serial Flash memory with dual/quad SPI interface
  • 48-bit node address chip Maxim Integrated Products DS2502-E48 (contains valid MAC adress)
  • 2 x fine-pitch (0.5 mm) 100-pin high-speed (up to 10.0 GHz / 20 Gbps) hermaphroditic strips LSHM-150-04.0-L-DV-A-S-K-TR
  • Up to 52 differential FPGA input/output pins available on B2B strips
  • Up to 109 single-ended (+ 1 dual-purpose) FPGA input/output pins available on B2B strips
  • Ethernet (PHY), JTAG and SPI pins available on B2B strips
  • 4.0 A high-efficiency DC-DC switching regulator for power rail 1.2V
  • 1.5 A high-efficiency DC-DC switching regulator for power rail 1.5V
  • 2 x 800 mA DC-DC linear regulator for power rails 2.5V and VCCAUX
  • Processor supervisory circuits with power-fail and watchdog Texas Instruments TPS3705-33
  • 125 MHz clock signal (system + user)
  • Footprint for custom single-ended oscillator (option)
  • Power supply voltage: 3.3V
  • Dimensions: 50 mm × 40 mm (20 cm²)
  • Stacking hight: 8 mm
  • Maximum height on carrier board surface: 12 mm (standard connectors)
  • Weight: 17.2 ± 0.1 g

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

for Trenz Electronic modules with Spartan-6 LX100/LX150

ISE Design Suite (purchase of a software license is necessary)

ISE design suite supports the Spartan-6, Virtex-6, and CoolRunner devices, as well as their previous generation families. ISE design suite runs on Windows XP/7/Server and Linux operating systems. Additionally, ISE supports Spartan-6 devices on Windows 10.

Download and further information:

https://www.xilinx.com/products/design-tools/ise-design-suite.html

Development Support

There is a base board available for this module.

Latest documentation, design support files and reference designs with source files are available for download free of charge.

Scope of Delivery

  • 1 x TE0600-03-83I11-A Trenz Electronic GigaBee module with Xilinx Spartan-6 FPGA
  • 8 x screws
  • 4 x bolts

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "GigaBee XC6SLX150-3, 2 x 128 MByte SDRAM, industrial temperature range"

배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기TE0600-03-83I11-A

TE0600-03-83I11-A
  • TE0600-03-83I11-A
  • TE0600-03-83I11-A
  • TE0600-03-83I11-A
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동