MYS-7Z010-V2-0E1D-667-C-S 이미지 확대 보기
  • MYS-7Z010-V2-0E1D-667-C-S
  • MYS-7Z010-V2-0E1D-667-C-S
  • MYS-7Z010-V2-0E1D-667-C-S

MYS-7Z010-V2-0E1D-667-C-S

공유
짧은설명
Z-turn Board (Xilinx Zynq-7010)
판매가
165,000 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
44,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617271
제조사
MYIR Tech
상품재고
1개
MYS-7Z010-V2-0E1D-667-C-S
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보

- 667MHz Xilinx XC7Z010/020 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
- 1GB DDR3 SDRAM (2 x 512MB, 32-bit), 16MB QSPI Flash
- USB_UART, USB2.0 OTG, 1 x 10/100/1000Mbps Ethernet, CAN, HDMI, TF, …
- Onboard Three-axis Acceleration Sensor and Temperature Sensor
- Ready-to-Run Linux Single Board Computer
- Optional Camera and WiFi Modules, IO Extension Cape

 

Overview

The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010-1CLG400C) or Zynq-7020 (XC7Z020-1CLG400C) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.

The Z-turn Board takes full features of the Zynq-7010 / 7020 SoC, it has 1GB DDR3 SDRAM and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 96 / 106 user I/O and configurable as up to 39 LVDS pairs I/O.

 

 

The Z-turn Board is capable of running Linux operating system. MYIR has provided Linux 3.15.0 SDK, the kernel and many drivers are in source code. The board is delivered with complete accessory kit including two USB cables, one Ethernet cable, one HDMI cable, one 4GB TF card and one 5V power adapter and product CD-ROM which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional WiFi and camera modules, Z-turn IO Cape for the Z-turn Board. The Z-turn IO Cape provides many peripheral signals and interfaces including ADC, GPIO, LCD, Camera and three Pmod interfaces.

The Z-turn Board is an excellent development platform for evaluating and prototyping for Zynq-7000 SoC. It can also be used as a System-on-Module (SOM) for your next embedded design; typical applications are Industrial Automation, Test & measurement, Medical Equipment, Intelligent Video Surveillance, Aerospace and military, etc.


Features

 

Item

Features

SoC

Xilinx XC7Z010-1CLG400C (Zynq-7010) or XC7Z020-1CLG400C (Zynq-7020)
- 667MHz ARM? dual-core Cortex™-A9 MPCore processor (up to 866MHz)
- Integrated Artix-7 class FPGA subsystem
with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)

- NEON™ & Single / Double Precision Floating Point for each processor
-
Supports a Variety of Static and Dynamic Memory Interfaces

Memory

1GB DDR3 SDRAM (2 x 512MB, 32-bit)

Storage

16MB QSPI Flash

TF card interface

Communications

1 x 10/100/1000M Ethernet

1 x CAN

1 x Mini USB2.0 OTG

1 x USB-UART debug interface

Display

1 x HDMI (supports 1080p resolution)

We are using evaluation version of Xylon's logiCVC-ML and logiCLK IP core.
Please contact Xylon to buy the license of the IP core for logiCVC-ML or logiCLK.

http://www.logicbricks.com/Products/logiCVC-ML.aspx

http://www.logicbricks.com/Products/logiCLK.aspx

 

User I/O

Brought out via two 1.27mm pitch 80-pin SMT female connectors
- 90/106 user I/O (7010/7020)
-
Configurable as up to 39 LVDS pairs I/O

Dimensions

63mm x 102mm x 1.6mm (8-layer PCB design)

Power supply

USB power supply or DC 5V/2A

Others

Onboard three-axis acceleration sensor and temperature sensor
1 x 2.54mm pitch 14-pin JTAG interface

2 x Buttons (1x Reset, 1 x User)

4-channel toggle switch

5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED)

1 x Buzzer

OS support Linux 3.15.0

Target Applications

Evaluation and Prototyping for Zynq-7000 AP SoC

Industrial Automation

Test & measurement

Medical Equipment

Intelligent Video Surveillance

Aerospace and military

 


Z-turn Board in the Video

http://youtu.be/1fziE-x2TC0

 

 

 

Z-turn IO Cape

Z-turn IO Cape (an IO extension board for Z-turn Board) Z-turn Board Mounted on Z-turn IO Cape


 

Hardware Features

The Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.


The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix?-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex?-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.


Z-7010

Z-7015

Z-7020

Z-7030

Z-7035

Z-7045

Z-7100

Processor Core

Dual ARM? Cortex™-A9 MPCore™ with CoreSight™

Processor Extensions

NEON™ & Single / Double Precision Floating Point for each processor

L1 Cache

32 KB Instruction, 32 KB Data per processor

L2 Cache

512 KB

On-Chip Memory

256 KB

Memory Interfaces

DDR3, DDR3L, DDR2, LPDDR2, 2x Quad-SPI, NAND, NOR

Peripherals

2x USB 2.0 (OTG), 2x Tri-mode Gigabit Ethernet, 2x SD/SDIO

Logic Cells

28K Logic Cells

74K Logic Cells

85K Logic Cells

125K Logic Cells

275K Logic Cells

350K Logic Cells

444K Logic Cells

BlockRAM (Mb)

240 KB

380 KB

560 KB

1,060 KB

2,000 KB

2,180 KB

3,020 KB

DSP Slices

80

160

220

400

900

900

2,020

Transceiver Count

4 (6.25 Gb/s)

up to 4 (12.5 Gb/s)

up to 16 (12.5 Gb/s)

up to 16 (12.5 Gb/s)

up to 16 (10.3125 Gb/s)

 

 


Zynq-7000 Devices

 

Z-turn Board Function Block Diagram

 

Z-turn Board Dimension Chart

Software Features

Item

Features

Description

Cross compiler

gcc 4.6.1

gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-50)

Boot program

BOOT.BIN

First boot program including FSBL, bitstream and u-boot

Linux Kernel

Linux 3.15.0

Customized kernel for MYS-XC7Z010/020

Drivers

USB OTG

USB OTG driver

Ethernet

Gigabit Ethernet driver

MMC/SD/TF

MMC/SD/TF card driver

CAN

CAN driver

LCD Controller

XYLON LCD driver

HDMI

HDMI driver

Button

Button driver

UART

UART driver

LED

LED driver

GPIO

GPIO driver

Buzzer

Buzzer driver

G-Sensor

Three-axis acceleration sensor driver

Tempreture

Sensor

Temperature sensor driver

File System

Ramdisk

Ramdisk system image

Ubuntu Desktop 12.04

Tar file

 

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.

 

1 Xilinx Zynq-7000 Overview 658 KB
2 Z-turn Board Overview 1.46 MB
3 Z-turn Board Dimensions 150 KB
4 Z-turn Board track length for I/O 62 KB
5 Z-turn Board Schematic 634 KB

 

Z-turn Board Top-view

 

Z-turn Board Bottom-view

 

 

 

Order Informatin

 

Item

Part No.

Packing List

Z-turn Board
MYS-7Z010-C-S

- One Z-turn Board (with XC7Z010-1CLG400C SoC)
- One 4GB TF card
- One product disk

MYS-7Z020-C-S
- One Z-turn Board (with XC7Z020-1CLG400C SoC)
- One 4GB TF card
- One product disk

Z-turn Kit

MYS-7Z010-C

 

- One Z-turn Board (MYS-7Z010-C-S or MYS-7Z020-C-S)
- One 1.5m cross Ethernet cable
- One 1.5m Mini USB2.0 cable
- One Mini USB OTG Data cable
- One HDMI cable
- One 4GB TF card
- One 5V/2A Power adapter
- One product disk (including user manual,
schematic in PDF format, datasheets
and software package)


MYS-7Z020-C

 



배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기MYS-7Z010-V2-0E1D-667-C-S

MYS-7Z010-V2-0E1D-667-C-S
  • MYS-7Z010-V2-0E1D-667-C-S
  • MYS-7Z010-V2-0E1D-667-C-S
  • MYS-7Z010-V2-0E1D-667-C-S
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동