- MYC-C7Z010/20-V2 CPU Module as Controller Board
- Xilinx XC7Z010/20 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
- 1GB DDR3 SDRAM (2 x 512MB, 32-bit)
- 4GB eMMC, 32MB QSPI Flash
- 4 x USB2.0 Host, Gigabit Ethernet, CAN, HDMI, LCD, TF
- 1 x XADC, 3 x PMoD, 1 x FMC
- Optional 4.3 or 7 inch LCD/TSP
- Ready-to-Run Linux 4.14.0 

Description

MYIR is a Xilinx Alliance Member, welcome to use MYIR's Xilinx products!

We also offer custom design services, welcome your inquiry!

http://www.xilinx.com/alliance/memberlocator/1-2wv1bc.html

The MYD-C7Z010/20-V2 development board is built around the MYC-C7Z010/20-V2 CPU Module which is a compact Linux-ready ZYNQ-based SOM (System on Module). The MYC-C7Z010/20-V2 combines the Xilinx Zynq-7010 or Zynq-7020 SoC device, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. It is connected to the MYD-C7Z010/20 base board through two 0.8mm pitch 140-pin board-to-board connectors.

The MYD-C7Z010/20-V2 development board takes full features of the Zynq-7010 and Zynq-7020 SoCs’ powerful dual-core ARM Cortex-A9 processing system and Xilinx 7-series Field Programmable Gate Array (FPGA) logic unit to create a rich set of peripherals to the base board through headers and connectors including one RS232 serial port, four USB Host ports, one Gigabit Ethernet port, CAN, HDMI, LCD/Touch screen, TF card slot, RTC, one XADC header to allow you take advantage of Xilinx XADC; it has three PMoD headers to meet your I/O needs with PMoDs (only for 7020); it also has a low-pin count FMC connector to allow various FMC cards for custom I/O options. User can integrate a MYC-C7Z010-V2 or a MYC-C7Z020-V2 SOM on the same base board, thus making two variants of Zynq evaluation boards.

MYD-C7Z010-V2 Development Board – with MYC-C7Z010-V2 CPU Module for Xilinx XC7Z010

MYD-C7Z020-V2 Development Board – with MYC-C7Z020-V2 CPU Module for Xilinx XC7Z020

MYD-C7Z010/20-V2 Development Board 

The MYD-C7Z010/20-V2 development board is delivered with necessary cable accessories and MYIR offers optional 4.3-inch and 7-inch LCD Module. The board is preloaded with Linux. It is a high-performance and low-cost development platform for evaluation and prototype based on Xilinx Zynq-7000 All Programmable SoC family.

Features

Mechanical Parameters

• Dimensions: 190mm x 110mm (base board), 75mm x 55mm (CPU Module)
• PCB layers: 4-layer design (base board), 10-layer design (CPU Module)
• Power supply: 12V/0.5A (base board), 5V/0.5A (CPU Module)
• Working temp.: 0~70 Celsius or -40~85 Celsius (industrial grade)

The MYD-C7Z010/20-V2 Controller Board (MYC-C7Z010/20-V2 CPU Module)

MYC-C7Z010/20-V2 Top-view 

SoC

• Xilinx XC7Z010-1CLG400 (Zynq-7010) or XC7Z020-1CLG400/XC7Z020-2CLG400 (Zynq-7020)
- 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
- Integrated Artix-7 class FPGA subsystem
with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
- NEON™ & Single / Double Precision Floating Point for each processor
- Supports a Variety of Static and Dynamic Memory Interfaces

Memory

• 1GB DDR3
• 4GB eMMC
• 32MB QSPI Flash (16MB is optional)

Peripherals and Signals Routed to Pins

• 10/100/1000M Ethernet PHY (YT8531SH)
• External watchdog
• Three LEDs
- One blue LED for power indicator
- One red LED for FPGA program done indicator
- One green user LED

• Two 0.8mm pitch 140-pin board-to-board expansion connectors bring out below signals:
  - One Gigabit Ethernet
  - One USB OTG 2.0
  - Two Serial ports
  - Two I2C
  - Two CAN BUS
  * Serial ports, I2C and CAN signals will be reused in PS part, or implemented through PL pins
  - Two SPI (can be implemented through PL pins)
  - ADC (one independent differential ADC, 16-channel ADC brought out through PL pins)
  - One SDIO

The MYD-C7Z010/20-V2 Base Board (MYB-C7Z010/20)

PS Unit

• Four USB 2.0 Host ports (through USB Hub)
• One RS232 (DB9 port)
• One TF card slot (bootable)
• One CAN interface
• One 10/100/1000M Ethernet
• One 2.54mm pitch 14-pin JTAG interface (PS, PL reused)
• Battery backed RTC
• One User Button (One I2C, can be connected to LCD and Resistive Touch Screen)
• Jumpers
- One for booting selection from TF card or QSPI
- One for JTAG selection for using PS and PL reused or independent JTAG configured through PL pins
- One for selection if adding FMC module to JTAG

PL Unit

• One XADC interface
• One Xilinx standard LPFMC interface
• One HDMI interface (16-bit YCrCb, support 1080p display, do not support audio)
• LCD/Touch screen interface (16-bit RGB, signals reused with HDMI, supports resistive and capacitive touch screen)
• Two LEDs (one for FMC module detection, one for power indicator)
• Three-channel PMoD (only for XC7Z020)

OS Support

• Linux 4.14.0

Other MYIR's Xilinx Products

http://www.myirtech.com/xilinxseries.asp

Z-turn Board Single Board Computer (based on Zynq-7010 / 7020)

Z-turn Lite Single Board Computer (based on Zynq-7007S / Zynq-7010)

MYD-C7Z015 Development Board (MYC-C7Z015 CPU Module as core board)

MYD-Y7Z010/20 Development Board (MYC-Y7Z010/20 CPU Module as core board)

MYD-Y7Z010/20-V2 Development Board (MYC-Y7Z010/20-V2 CPU Module as core board)

MYD-CZU3EG/4EV/5EV Development Board (MYC-CZU3EG/4EV/5EV CPU Module as core board)

VECP Starter Kit - a complete Vision Edge Computing Platform (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)

FZ5 Card (AI Accelerator Card based on Zynq UltraScale+ ZU5EV MPSoC)

FZ3 Card - deep learning accelerator card (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)