Overview

XCM-023 is an evaluation board equipped with a XILINX's high performance FPGA, Artix-7 series (F484 package).
XCM-023 series have voltage regulators, oscillators, user LEDs, switches,  and a configuration device on its compact credit-card size board.
Only one 3.3V single power supply is needed. There are 100 user I/Os divided into two Vcco groups.
A SIF40 connector with ACC series offers you GTP transceiver (RocketIO) connections.

Click to Zoom

Click to Zoom

Block Diagram

Click to Zoom

Typical Eye Diagram

Click to Zoom

Device: XC7A100T-1FGG484C Channel：0_216 Ref.Clk：125MHz Rate：2.5Gbps Swing：800mV Data Pattern: PRBS-7 Pre/Post-Emphasis: 0dB

Specifications

• Xilinx XC7A35T-1FGG484C, XC7A50T-1FGG484C, XC7A75T-1FGG484C, XC7A100T-1FGG484C or XC7A200T-1FBG484C

  Feature	XC7A35T	XC7A50T	XC7A75T	XC7A100T	XC7A200T
  Slices	5,200	8,150	11,800	15,850	33,650
  Logic Cells	33,280	52,160	75,520	101,440	215,360
  Maximum Distributed RAM Bits	400	600	892	1,188	2,888
  Maximum Block RAM Bits	1,800	2,700	3,780	4,860	13,140
  Maximum user I/O pins(Device)	250	250	250	285	285
  Maximum user I/O pins(Board)	100	100	100	100	100
  GTP Channel (Device)	4	4	4	4	4
  GTP Channel (Board)	4	4	4	4	4
  DSP Slices	90	120	180	240	740
  CMT (MMCM x1 + PLL x1)	5	5	6	6	10

• 100 user I/O, 100 mil (2.54 mm) dual in-line.
  - Separable VCCO (CNB)
• Power : 3.3V single supply
  - 1.0/1.2/1.5/1.8/2.5V on-board regulators
  - Sequenced power supplies (Power on)
• Power-on Reset IC for FPGA configuration
• Clocks: 50MHz Oscillator (50 ppm) and external inputs
• RocketIO reference clocks: 125 MHz, 150MHz and external input (MMCX connectors)
• RocketIO Tx/Rx 4ch. (SIF40 Interface)
• DDR3 SDRAM: MT41J64M16 (Micron, 1Gbit)
• Configuration Device: N25Q064 (Micron, 64Mbit)
• User Switch x2 (Push x1, Slide x1bit)
• User LED x2
• Status LED x2 (Power, Done)
• JTAG port (7 pin socket)
  - JTAG buffer for stable download and debug
• High quality eight layers PCB. (Immersion gold)
• Credit-Card-Size 3.386"x 2.126" (86 x 54 mm)
• Tested all I/O
• RoHS compliance
• MADE IN JAPAN

Package Contents

Item	Image	Quantity
FPGA board (XCM-023-***)		1
Pin Headers		2
Sockets		2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

• User's manual, Schematic , etc