The DE10-Nano Development Kit presents a robust hardware design platform built around the Intel System-on-Chip (SoC) FPGA, which combines the latest dual-core Cortex-A9 embedded cores with industry-leading programmable logic for ultimate design flexibility. Users can now leverage the power of tremendous re-configurability paired with a high-performance, low-power processor system. Altera’s SoC integrates an ARM-based hard processor system (HPS) consisting of processor, peripherals and memory interfaces tied seamlessly with the FPGA fabric using a high-bandwidth interconnect backbone. The DE10-Nano development board is equipped with high-speed DDR3 memory, analog to digital capabilities, Ethernet networking, and much more that promise many exciting applications.

Component Solution for Intel FPGAs

▲ Accelerometer Solution	▲ SDRAM Memory Solution
▲ Clock Solution	▲ Ethernet Solution

▶ Specifications 

The DE10-Nano board has many features that allow users to implement a wide range of designed circuits, from simple circuits to various multimedia projects.

The following hardware is provided on the board:

FPGA Device

• Intel Cyclone® V SE 5CSEBA6U23I7NDK device (110K LEs)
• Serial configuration device  – EPCS64 (revision B2 or later)
• USB-Blaster II onboard for programming; JTAG Mode
• HDMI TX, compatible with DVI 1.0 and HDCP v1.4
• 2 push-buttons
• 4 slide switches
• 8 green user LEDs
• Three 50MHz clock sources from the clock generator
• Two 40-pin expansion headers
• One Arduino expansion header (Uno R3 compatibility), can be connected with Arduino shields
• One 10-pin Analog input expansion header (shared with Arduino Analog input)
• A/D converter, 4-pin SPI interface with FPGA

* If the specification of memory device in Quick Start Guide and official website is discordant, refer to DE10-Nano website as the sole stardard.

HPS (Hard Processor System)

• 800MHz Dual-core ARM Cortex-A9 processor
• 1GB DDR3 SDRAM (32-bit data bus)
• 1 Gigabit Ethernet PHY with RJ45 connector
• USB OTG Port, USB Micro-AB connector
• Micro SD card socket
• Accelerometer (I2C interface + interrupt)
• UART to USB, USB Mini-B connector
• Warm reset button and cold reset button
• One user button and one user LED
• LTC 2x7 expansion header

Block Diagram of the DE10-Nano Board

Connectivity

• Connect LT24

• Connect Arduino

• Connect MTL2

• Connect D8M

• Connect D5M

• Connect LTC2607 (AD/DA Daugher Card)

▶ Layout

• Size：68.6x107mm 

DE10-Nano Board Mechanical Layout

▶ Resouces
 

Documents

Title	Version	Size(KB)	Date Added	Download
How to distinguish the board revision and what's differents. (rev. A/B/B2/C Hardware)		315	2019-02-13
DE10-Nano User Manual (rev. B2/C Hardware)	2.1	7535	2018-11-15
DE10-Nano User Manual (rev. A/B Hardware)	1.8	8953	2018-02-01
Quick Start Guide(rev. A/B Hardware)		10727	2017-11-02
Quick Start Guide(rev. B2/C Hardware)		1574	2017-11-01
DE10-Nano Product Brief		2851	2017-08-05
Getting Started Guide		3417	2017-08-04
My First FPGA		3812	2017-08-01
My First HPS		1234	2017-07-31
DE10-Nano Control Panel		18361	2017-07-30
DE10-Nano OpenCV		2291	2017-07-29
Bluetooth SPP		1948	2017-07-28
DE10-Nano Schematic		1421	2017-07-27

CD-ROM

Title	Version	Size(KB)	Date Added	Download
DE10-Nano CD-ROM (rev. C Hardware)	1.3.4		2019-01-09
DE10-Nano CD-ROM (rev. A/B Hardware)	1.2.4		2018-02-01
DE10-Nano CD-ROM (rev. B2 Hardware)	1.2.5		2018-02-01
Network Socket Example Design	1.0.0		2017-10-30
Quartus Download	16.0		2016-12-22

Daughtger Card Demonstrations

Linux BSP (Board Support Package): MicroSD Card Image

BSP(Board Support Package) for Intel FPGA SDK OpenCL 16.1

Title	Version	Size(KB)	Date Added	Download
DE10-Nano OpenCL BSP (.zip)	1.0		2017-05-05
DE10-Nano OpenCL BSP (.tar.gz)	1.0		2017-05-05
DE10-Nano OpenCL User Manual	1.0	2171	2017-05-04

BSP(Board Support Package) for Intel FPGA SDK OpenCL 18.1

Title	Version	Size(KB)	Date Added	Download
DE10-Nano OpenCL User Manual	2.0	2409	2019-01-03
DE10-Nano OpenCL BSP (.tar.gz)	1.0		2019-01-02
DE10-Nano OpenCL BSP (.zip)	1.0		2019-01-02

3D-Printer-Case

Title	Version	Size(KB)	Date Added	Download
DE10_Nano_Case		117	2017-05-05

More resources about IP and Dev. Kit are available on Intel User Forums. 

1. DE10-Nano Board
2. DE10-Nano Quick Start Guide
3. Type A to Mini-B USB Cable x1
4. Type A to Micro-B USB Cable x1
5. Power DC Adapter (5V)
6. microSD card (installed)
7. Four Silicon Footstands

▶ Demo

DE10^TM -Nano Kit: Traning Materials and Support Packages   

DE10-Nano Kit: Linux BSP Demo  

DE10^TM -Nano Kit: Expansion Card  

DE10-Nano Kit: openCL