MYC-C4378-V2-4E512D-100-C 이미지 확대 보기
  • MYC-C4378-V2-4E512D-100-C

MYC-C4378-V2-4E512D-100-C

공유
짧은설명
MYC-C4378 CPU Module (1GHz AM4378, 512MB DDR3, 4GB eMMC, commercial grade)
판매가
111,100 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
44,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617415
제조사
MYIR Tech
MYC-C4378-V2-4E512D-100-C
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보

Description

The MYC-C437X CPU Module is a low-cost compact-sized SOM (System on Module) based on 1GHz TI AM437x (AM4376, AM4377, AM4378, AM4379) ARM Cortex-A9 Sitara processors from Texas Instruments (TI), featuring 3D graphics acceleration for rich graphical user interfaces, PRU-ICSS for industrial protocols, improved Vector Floating Point(VFP) unit and other peripherals and interfaces support like Quad-SPI, dual parallel cameras, two independent eight-channel ADCs, etc.


The MYC-C437X CPU Module integrates the AM437x processor, 512MB DDR3 SDRAM, 4GB eMMC Flash, 32KB EEPROM, Gigabit Ethernet PHY and Power Management IC TPS65218 on board and can be served as the controller board of your next design. It has two 0.8mm pitch 2*50-pin board-to-board expansion connectors for interconnecting with your base board, thus providing an interface for the base board to carry most of the I/O signals to and from the CPU module.

 

(Top-view) (Bottom-view)

MYC-C437X CPU Module


The AM437x processor family consists of 4 pin-pin compatible devices (AM4376, AM4377, AM4378 and AM4379) with various options including speed grades, packages, graphics and peripherals. MYIR delivers the MYC-C437X with AM4377 or AM4378 processor by default. From the image below we can see if you need EtherCAT support, the MYC-C4377 module would be suitable; if you need 3D graphics acceleration to support display and advanced user interfaces, the MYC-C4378 module may fit your needs.


 


TI AM437x Devices

 


MYIR has also designed two development boards for evaluating the MYC-C437X CPU Module. The two boards are all built around the MYC-C437X CPU Module but the base board designs are different to satisfy customers' different requirements. The MYD-C4378 development board features versatile peripheral interfaces extended on base board including four USB Host ports, one USB OTG, two Gigabit Ethernet ports, two CAN, two camera interfaces, TF card slot, HDMI and LCD interfaces but it could not support PRU-ICSS. While the MYD-C4377-PRU development board is designed especially for PRU-ICSS applications, it features one Gigabit Ethernet port as well as two 10/100Mpbs Ethernet ports from the PRU-ICSS subsystems and uses TI SYS/BIOS v6.45 Real-time Operating System. Besides, both of the two boards can run Linux OS and are provided with software packages and detailed documentation sources. They are excellent platforms for customers’ evaluation and prototype based on TI’ AM437x solution.



MYD-C437X Development Board




 

MYD-C437X-PRU Development Board

 



MYC-C437X Interface Diagram

Features

Mechanical Parameters

  • Dimensions: 60mm x 45mm
  • PCB Layers: 8-layer design
  • Power supply: 5V/0.33A
  • Working temperature: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

Processor

  • TI AM437x (AM4376, AM4377, AM4378 and AM4379)
    - Up to 1GHz Sitara ARM Cortex-A9 32-Bit RISC processor
    -
    POWERVR SGX Graphics Accelerator subsystem for 3D graphics acceleration to support display and gaming effects
    - Single-cycle vector floating point (VFP)
    - Dual camera and display processing subsystem
    - Cryptographic acceleration and secure boot
    - PRU-ICSS enables simultaneous industrial Ethernet protocols and motor feedback protocols
    - Support for 32 bit LPDDR2/DDR3/DDR3L
    - Low power: ~5mW deep sleep and < 0.1mW RTC-only
    - Simplified power sequence for flexible power designs

Memory

  • 512MB DDR3 SDRAM (256MB is optional)
  • 4GB eMMC Flash (reserved 256/512MB Nand Flash design)
  • 16MB QSPI Flash (reserved design, not soldered)
  • 32KB EEPROM

Peripherals and Signals Routed to Pins
MYC-C437x Pinouts Description

  • Power Management IC (TPS65218B1RSLR)
  • Gigabit Ethernet PHY
  • One power indicator (Red LED)
  • One user LED (Green)
  • Two 0.8mm pitch 100-pin board-to-board expansion connectors can carry out interfaces below
    - 2 x USB
    - 6 x Serial ports
    - 2 x I2C
    - 2 x CAN
    - 2 x SPI
    - 14 x ADC (8 channels from ADC1 and 6 channels from ADC0)
    - 3 x SDIO

OS Support

  • Linux 3.12.10 (for MYD-C437X)
  • Linux 4.1.18 (for MYD-C437X-PRU)
  • SYS/BIOS 6.45 (TI-RTOS) OS (for MYD-C437X-PRU)

 

Hardware Features

The TI AM437x high-performance processors are based on the ARM Cortex-A9 core. Customers using this next generation solution will see an increase in performance, as well as extensive reuse from the ARM Cortex-A8 offerings.

Increasing performance and peripheral support
Sitara AM437x processors deliver the right balance of:
Performance
• Up to 1GHz of processing power
• 3D graphics accelerator
• On-chip quad-core PRU co-processor for real-time processing
• Improved vector floating-point unit
Interfaces

• LPDDR2/DDR3
• QSPI
• Display subsystem
Connectivity

• Two parallel camera ports
• Dual-port 1Gb Ethernet switch
• Two independent, eight-channel ADCs
• WiLink connectivity drivers
• Industrial protocols via PRU-ICSS

 

A. Use of TSC will limit available ADC0 inputs.

B. Max clock: LPDDR2 = 266 MHz; DDR3/DDR3L = 400 MHz

AM437x Function Block Diagram



MYC-C437X CPU Module Function Block Diagram




Dimensions of MYC-C437X CPU Module

 

Software Features

OS

Item

Features

Description

Linux

Bootstrap program

u-boot-201605

Bootstrap (source code)

Kernel

Version

Linux 3.12.10 (Customized kernel for MYD-C437X, source code)

Linux 4.1.18 (especially designed for MYD-C437X-PRU, source code)

Drivers

USB Host

USB Host driver (soure code)

USB OTG

USB OTG driver (source code)

Ethernet

Gigabit Ethernet driver (source code)

PRU Ethernet

Industrial Ethernet driver (source code)

MMC/SD/TF

MMC/SD/TF card driver (source code)

Nand Flash

Nand Flash driver (source code)

eMMC

eMMC driver (source code)

CAN

CAN driver (source code)

RS485

RS485 driver (source code)

LCD Controller

LCD driver (source code, supports 4.3, 7-inch LCD)

RTC

RTC driver (source code)

Touch driver

Resistive and Capacitive touch screen driver (source code)

Button

Button driver (source code)

LED

LED driver (source code)

Watchdog

Watchdog driver (source code)

Camera

Camera driver (source code)

UART

UART driver (source code)

SPI

SPI driver (source code)

ADC

ADC driver (source code)

I2C

I2C driver (source code)

File system

Buildroot

Provide image file

Arago

Provide image file

SYS/BIOS

Kernel

Version

SYS/BIOS 6.45 for MYD-C437X-PRU

Evaluation environment

Code Composer Studio Version 6.2.x

ARM compiler

GNU V4.9.3 (Linaro)

PRU compiler

PRU 2.1.13

Application Examples

Bootloader, EtherCAT Slave Application, EtherNet/IP Adapter Application, EtherNet MAC Application, Example Utils Application

 

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.

1 TI AM437x Datasheet 2.76 MB
2 TI AM437x Technical Reference Manual 19.8 MB
3 MYC-C437X CPU Module Overview 1.76 MB
4 MYC-C437x Pinouts Description 60 KB
5 MYD-C437X Development Board Overview 1.9 MB
6 MYD-C437X Base Board Schematic
355 KB

7 MYD-C437X-PRU Development Board Overview
0.99 MB

8 MYD-C437X-PRU Base Board Schematic
782 KB

 

MYC-C437X CPU Module (Top-view)


MYC-C437X CPU Module (Bottom-view)



MYD-C437X Development Board



MYD-C437X-PRU Development Board

 

Item

Part No.

MYC-C4378 CPU Module
(1GHz AM4378, 512MB DDR3, 4GB eMMC, commercial grade)

MYC-C4378-4E512D-100-C

MYC-C4378 CPU Module
(1GHz AM4378, 512MB DDR3, 4GB eMMC, industrial grade)
MYC-C4378-4E512D-100-I
MYC-C4377 CPU Module
(1GHz AM4377, 512MB DDR3, 4GB eMMC, industrial grade)
MYC-C4377-4E512D-100-I

 

 

관련 상품

배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기MYC-C4378-V2-4E512D-100-C

MYC-C4378-V2-4E512D-100-C
  • MYC-C4378-V2-4E512D-100-C
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동