▶ Product Description

The NetFPGA-1G-CML is a versatile, low cost network hardware development platform featuring a Xilinx^? Kintex^?-7 XC7K325T-1FFG676 FPGA and includes four Ethernet interfaces capable of negotiating up to 1 GB/s connections. 512 MB of 800 MHz DDR3 can support high-throughput packet buffering while 4.5 MB of QDRII+ can maintain low-latency access to high demand data, like routing tables. Rapid boot configuration is supported by a 128 MB BPI Flash, which is also available for non-volatile storage applications. The standard PCIe form factor supports high-speed x4 Gen 2 interfacing. The FMC carrier connector provides a convenient expansion interface for extending card functionality via Select I/O and GTX serial interfaces. The FMC connector can support SATA-II data rates for network storage applications. The FMC connector can also be used to extend functionality via a wide variety of other cards designed for communication, measurement, and control.

▶ Support Materials

▶ Note

The NetFPGA-1G-CML is designed to support the Stanford NetFPGA architecture with reference designs available through the NetFPGA GitHub Organization (http://www.github.com/cmlab/netfpga-1g-cml/wiki). It is fully compatible with Xilinx Vivado^? and ISE^? Design Suites as well as the Xilinx SDK for embedded software design.

For reference projects, design resources, and the most up-to-date documentation, please visit the NetFPGA-1G-CML Resource Center.

▶ Stats

Processor/IC: Xilinx Kintex-7 XC7K325T-1FFG676 FPGA

▶ Features

• Xilinx Kintex-7 XC7K325T-1FFG676 FPGA
  
• X4 Gen 2 PCI Express
  
• 1-Gbit BPI Flash
  
• SD card slot
  
• Real time clock
  
• Crypto-authentication chip
  
• Can be powered inside or outside a PC using a standard ATX power supply with PCIe 6 pin or 6pin+2 connector. Please refer to reference manual for more detail
  
• X16 4.5 MB QDRII+ static RAM (450 MHz)
  
• X8 512 MB DDR3 dynamic RAM (800 MHz)
  
• Low-jitter 200 MHz oscillator
  
• Four 10/100/1000 Ethernet PHYs with RGMII
  
• 32-bit PIC microcontroller
  
• USB microcontroller
• Four on-board LEDs and four onboard general-purpose buttons
• High pin count FMC connector (VITA 57) with 100 Select-IO and 4 GTX serial pairs
• Two Pmod connectors

▶ What's Included

Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the NetFPGA-1G-CML, visit the product page on our main website: NetFPGA-1G-CML

The NetFPGA-1G-CML is a versatile, low cost network hardware development platform featuring a Xilinx Kintex?-7 XC7K325T FPGA and includes four Ethernet interfaces capable of negotiating up to 1 GB/s connections. 512 MB of 800 MHz DDR3 can support high-throughput packet buffering while 4.5 MB of QDRII+ can maintain low-latency access to high demand data, like routing tables. Rapid boot configuration is supported by a 128 MB BPI Flash, which is also available for non-volatile storage applications. The standard PCIe form factor supports high speed x4 Gen 2 interfacing. The FMC carrier connector provides a convenient expansion interface for extending card functionality via Select I/O and GTX serial interfaces. The FMC connector can support SATA-II data rates for network storage applications. The FMC connector can also be used to extend functionality via a wide variety of other cards designed for communication, measurement, and control.

▶ Documentation

▶ External Links

▶ Pmods

Digilent는 70여가지의 Pmod 제품을 제공하고 있습니다. FPGA 보드의 Pmod에 커넥터에 Pmod 제품을 연결하면 보드에서 제공하지 않는 70여가지의 다양한 기능을 사용할 수 있습니다. 아래 링크페이지를 통해 다양한 Pmod 제품들을 검토해 보시기 바랍니다.
http://www.inipro.net/goods/goods_list.php?cateCd=025004