Overview

Xilinx Artix-7 F484 High Performance FPGA Board. XCM-114 is simple and easy to use. It's Compact size. 3.3V single power supply operation.

Click to Zoom

Click to Zoom

Specifications

• Xilinx XC7A35T-1FGG484C, XC7A50T-1FGG484C, XC7A75T-1FGG484C, XC7A100T-1FGG484C or XC7A200T-1FBG484C

  Feature	XC7A35T	XC7A50T	XC7A75T	XC7A100T	XC7A200T
  Slices	5,200	8,150	11,800	15,850	33,650
  Logic Cells	33,280	52,160	75,520	101,440	215,360
  Maximum Distributed RAM Bits	400	600	892	1,188	2,888
  Maximum Block RAM Bits	1,800	2,700	3,780	4,860	13,140
  Maximum user I/O pins (Device)	250	250	250	285	285
  Maximum user I/O pins (Board)	128	128	128	128	128
  GTP Channel (Device)	4	4	4	4	4
  GTP Channel (Board)	2	2	2	2	2
  DSP Slices	90	120	180	240	740
  CMT (MMCM x1 + PLL x1)	5	5	6	6	10

  This table is for reference. Please refer to official data-sheets for certain information.

• 128 user I/Os (with two 80pin HIROSE connectors)
  - Separable VCCO (CNB)
• Power : 3.3V single supply
  - 1.0/1.2/1.5/1.8/2.5V are generated by on-board regulators
  - Sequenced power supplies (Power on)
• Power-on Reset IC for FPGA configuration
• RocketIO reference clocks: 125 MHz and external input (MMCX connectors)
• RocketIO Tx/Rx 2ch.
• DDR3 SDRAM: MT41J64M16 (Micron, 1Gbit)
• Configuration Device: N25Q064 (Micron, 64Mbit)
• Clocks: 50MHz Oscillator (50 ppm) and external inputs
• User Switch x2 (Push x1, Slide x1bit)
• User LED x2
• Status LED x2 (Power, Done)
• JTAG port (7 pin socket)
  - JTAG buffer for stable download and debug
• High quality eight layers PCB (Immersion gold)
• Compact size 1.693" x 2.126" (43 x 54 mm)
• Tested all I/Os
• RoHS compliance
• MADE IN JAPAN

Package Contents

Item	Image	Quantity
FPGA Board (XCM-114-***)		1
Sockets (HIROSE 80P)		2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

• User's manual, Schematic , etc