Overview

XCM-307 is an evaluation board equipped with a XILINX's high performance FPGA, Artix-7 series (FTG256 package).
XCM-307 has voltage regulators, an oscillator, user LEDs, switches and a configuration device on its compact size board.
Only one 3.3V single power supply is needed. There are 56 user I/Os divided into two Vcco groups.

Click to Zoom

Click to Zoom

Specifications

• Xilinx XC7A35T-1FTG256C or XC7A100T-1FTG256C

  Feature	XC7A35T	XC7A100T
  Slices	5,200	15,850
  Logic Cells	33,280	101,440
  Maximum Distributed RAM (kb)	400	1,188
  Maximum Block RAM (kb)	1,800	4,860
  DSP Slice	90	240
  CMT (MMCMx1+PLLx1)	5	6
  Maximum user I/O pins (Device)	170	170
  Maximum user I/O pins (Board)	56	56

  This table is for reference. Please refer to official data-sheets for certain information.

• 56 I/O PAD 100 mil (2.54 mm) grid
• Configuration Device: N25Q032 (Micron, 32Mbit)
• JTAG port (7 pin socket)
  - JTAG buffer for stable download and debug
• Power : 3.3V single supply
  - 1.0/1.8 V on-board regulators
  - Sequenced power supplies (Power on)
• Clocks: 50MHz Oscillator (50 ppm) and external inputs
• Power-on Reset IC for FPGA configuration
• User Switch x2 (Push x1, Slide x1bit)
• User LED x2
• Status LED x2 (Power, Done)
• High quality six layers PCB. (Immersion gold)
• Compact size 2.087" x 2.126" (53 x 54 mm)
• Tested all I/O
• RoHS compliance
• MADE IN JAPAN

Package Contents

Item	Image	Quantity
FPGA board (XCM-307-***)		1
Pin Headers		2

There is no paper document such as user's manual and circuit schematic in the package.
Please download those documents from the link in the documentation section below.

Documentation

• User's manual, Schematic , etc