Description
Measuring only 67.6mm by 45mm, the tiny MYC-SAMA5D3X series CPU Modules are designed especially to serve as the heart of your next embedded design. It is based on Atmel SAMA5D3 ARM Cortex-A5 series eMPUs which can operate at up to 536MHz. The module integrates 512MB DDR2 SDRAM, 256MB Nand Flash, 16MB Nor Flash, 4MB Data Flash and Gigabit Ethernet PHY on board and is equipped with one DDR2 SO-DIMM 200-pin connector to bring out all the I/O signals from the CPU Module.
The MYC-SAMA5D3X series CPU Modules are allow four selections of Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 and SAMA5D36 processors. All five modules are sharing the same circuit design with minor configuration settings. MYIR provides comprehensive documents and ready-to-run software packages for running Linux 3.6.9 and Android 4.0.4 operating systems on theMYC-SAMA5D3X series modules.
MYC-SAMA5D31 CPU Module for Atmel SAMA5D31
MYC-SAMA5D33 CPU Module for Atmel SAMA5D33
MYC-SAMA5D34 CPU Module for Atmel SAMA5D34
MYC-SAMA5D35 CPU Module for Atmel SAMA5D35
MYC-SAMA5D36 CPU Module for Atmel SAMA5D36
We can make a comparison for some main functions from below table:
We can see if you need Gigabit Ethernet, except MYC-SAMA5D31, other four models all can support; if you need two CANs, Gigabit Ethernet but no need LCD, MYC-SAMA5D35 is a good choice; if you want to expose most features of this module, MYC-SAMA5D34and MYC-SAMA5D36 has the most complete functions.
MYC-SAMA5D3X CPU Module Top-view
MYC-SAMA5D3X CPU Module Bottom-view
Customers can design their own base board using MYIR’s MYC-SAMA5D3X CPU modules as the core components to extend peripheral functions by headers to connectors on their base boards. MYIR also designed one base board to carry the controller board which is called MYD-SAMA5D3X Development Board and has provided an excellent platform for customers’ evaluation and prototype.
MYD-SAMA5D3X Development Board
Product Features
Similar Products
The Atmel® SAMA5D3 series of microprocessor units (MPUs) is based on the ARM® Cortex™-A5 processor, operating at up to 536MHz (850DMIPS) at under 150mW, delivering a high-performance, low-power platform for cost-sensitive industrial and consumer applications. It has comprehensive peripheral set for connectivity and user interface applications including Gigabit and 10/100 Ethernet, up to three HS USB ports, dual CAN, three SDIO/SD/MMC, UARTs, SPIs, TWIs, soft modem, LCD controller with graphics accelerator, camera interface, 12-bit ADC, 32-bit timers and more. Figure 1-3 SAMA5D3 Series Key Features The MYD-SAMA5D3X series development boards include one CPU module mounted on one base board. It exposes many of the Atmel SAMA5D3 features to the user in support of developing specific solutions.
SAMA5D3 Series Key Features
Item | MYC-SAMA5D31 | MYC-SAMA5D33 | MYC-SAMA5D34 | MYC-SAMA5D35 | MYC-SAMA5D36 | |
Processor | ATSAMA5D31 | ATSAMA5D33 | ATSAMA5D34 | ATSAMA5D35 | ATSAMA5D36 | |
- ARM Cortex-A5 Processor with Frequency up to 536 MHz - 32 KB Data Cache, 32 KB Instruction Cache, Virtual Memory System Architecture (VMSA) - Fully Integrated MMU and Floating Point Unit (VFPv4) - 128 KB Internal SRAM, 160 KB Internal ROM | ||||||
Dimensions | 67.6 x 45mm | |||||
PCB Layer | 8-layer design | |||||
Power Supply | 3.3V | |||||
Working Temp. | 0~70 Celsius or -40~85 Celsius | |||||
External Memory | 256MB/512MB DDR2 SDRAM (256MB is optional), | |||||
RTC | 32.768kHz crystal for RTC clock | |||||
LED | One Power Indicator (Red) One User LED (Blue) | |||||
Expansion Interface | 1.8V DDR2 SO-DIMM 200-pin connector brings out below peripheral signals: Note: The resources brought out from the expansion interfaces may be multiplexed with others. | |||||
Ethernet | ETH1_10/100 | ETH0_10/100/1000 | ETH0_10/100/1000 | ETH1_10/100 ETH0_10/100/1000 | ETH1_10/100 ETH0_10/100/1000 | |
CAN | 0 | 0 | 2 | 2 | 2 | |
LCD | 1 | 1 | 1 | 0 | 1 | |
Serial Ports | 6 | 4 | 4 | 6 | 6 | |
Timer Counters | 3 | 3 | 3 | 6 | 3 | |
MMC/SD | 2 | 2 | 2 | 2 | 2 | |
ISI | ITU-R BT. 601/656 Image Sensor Interface | |||||
USB | 2 x USB Host, 1 x USB Device | |||||
ADC | 12-channel 12-bit Analog-to-Digital Converter with Resistive Touch-Screen function | |||||
SPI | Two Master/Slave Serial Peripheral Interfaces | |||||
TWI | Three Two-wire Interface up to 400 Kbits supporting I2C Protocol and SMBUS | |||||
PWM | 4 x 16-bit PWM | |||||
JTAG | One JTAG interface | |||||
GPIOs | Up to 122 GPIOs can be used |
Signals Routed to SO-DIMM 200-pin Connector
MYIR has designed a base board for the MYC-SAMA5D3X CPU Modules. Please download below file to know signals routed to the SO-DIMM 200-pin connector.
MYC-SAMA5D3X CPU Module Block Diagram
The MYC-SAMA5D3X is a Linux and Android ready-to-run controller board. MYIR offers software packages along with the module. Many peripheral drivers are provided in source code to help customers quickly start their own development and create their own applications. The software features are summarized as below:
OS | Item | Features | Description | |
Linux | Boot | Boot Strap | First boot program (source code available) | |
u-boot | Secondary boot program (source code available) | |||
Boot Mode | Boot Linux from NAND Flash | |||
Image update | Support programming kernel image into Nand Flash through USB | |||
File system update | Support programming file system into Nand Flash through USB | |||
Kernel | Version | Linux 3.6.9 (source code available) | ||
File system | Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS | |||
File system | Format | UBIFS file system | ||
Drivers | USB Host, USB Device, Ethernet, MMC/SD, CAN, RS485, NandFlash, TWI (I2C), SPI, WM8904 (Audio), LCD Controller, RTC, Touch-Screen, PWM, USART, LED, HDMI | |||
Graphical Library | QT | Already ported (source code available) | ||
Android | Kernel | Version | Android 4.0.4 | |
Drivers | Ethernet, Serial port driver (USART1, DBGU), USB (USB_HOST*2,USB_OTG), SD card driver (Micro SD, MMC/SD), LCD+touch (LCD and touch screen driver), GPIO driver |
You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.
● 결제일로부터 1~3주 안에 배송됩니다.
● 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.
● 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.
● 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
● 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.
● 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
● 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?