MYD-CA5D36-256N256D-I 이미지 확대 보기
  • MYD-CA5D36-256N256D-I
  • MYD-CA5D36-256N256D-I

MYD-CA5D36-256N256D-I

공유
짧은설명
MYD-SAMA5D36-C Development Board (256MB DDR2, 256MB Nand Flash, industrial grade)
판매가
견적문의 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
44,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617596
제조사
MYIR Tech

상품상세정보

Description

The MYD-SAMA5D3X-C Development Board is a low-cost evaluation platform for Atmel’s SAMA5D3 ARM Cortex-A5 processor-based MPU which can operate at up to 536MHz (850DMIPS) at under 150mW and is ideal for various industrial application such as control panels, smart grid devices and bar code scanners - anything that needs high levels of connectivity, enhanced user interfaces, robust security, or battery operation.

 

 

The MYD-SAMA5D3X-C Development board is using a base board for MYIR’s MCC-SAMA5D3X-C CPU Module which is a System on Module (SoM) for the heart of the system. The CPU module MCC-SAMA5D3X-C has 256MB DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM and Gigabit Ethernet PHY on board. It is connected with the base board through two 2.0mm pitch 80-pin male pin headers. The base board has all extended interfaces for software development including RS232 and RS485 serial ports, one 10/100/1000Mbps Ethernet, two CAN, two USB Host and one USB Device, TF card, JTAG and more others. MYIR also offers 4.3- and 7-inch LCD Modules, USB WiFi, Camera, GPS and GPRS modules for this board as options. The Linux, Android SDK and detailed user manual for this board are offered to enable your rapid evaluation and development based on Atmel SAMA5D3 series processors. User can also use the MYD-SAMA5D3X-C board directly as control or display unit for your embedded products.

 

The MYD-SAMA5D3X-C has following models:

MYD-SAMA5D31-C Development Board – with MCC-SAMA5D31-C CPU Module for Atmel SAMA5D31

MYD-SAMA5D33-C Development Board – with MCC-SAMA5D33-C CPU Module for Atmel SAMA5D33

MYD-SAMA5D34-C Development Board – with MCC-SAMA5D34-C CPU Module for Atmel SAMA5D34

MYD-SAMA5D35-C Development Board – with MCC-SAMA5D35-C CPU Module for Atmel SAMA5D35

MYD-SAMA5D36-C Development Board – with MCC-SAMA5D36-C CPU Module for Atmel SAMA5D36

The main differences can be seen from below table. MYIR deliveries the MYD-SAMA5D36-C model by default.

 

Item

MYD-SAMA5D31-C

MYD-SAMA5D33-C

MYD-SAMA5D34-C

MYD-SAMA5D35-C

MYD-SAMA5D36-C

Processor

ATSAMA5D31

ATSAMA5D33

ATSAMA5D34

ATSAMA5D35

ATSAMA5D36

10/100/1000 Ethernet

0

1

1

1

1

UART

2

2

2

2

2

LCD

1

1

1

0

1

CAN

0

0

2

2

2



MYD-SAMA5D3X-C Development Board (for Atmel SAMA5D3 Series Processors)

Features

 

Mechanical Parameters

  • Dimensions: 
    - Base board: 140mm x 100mm
    - CPU Module (
    MCC-SAMA5D3X-C): 55mm x 82mm
  • PCB layers:
    - Base board: 4-layer design
    - CPU Module: 8-layer design
  • Power supply: 5V/2A (base board), 3.3V/0.5A (CPU Module)
  • Power consumption: 5V/0.05A (base board), 5V/0.32A (base board + CPU Module), 
    5V/0.37A (base board + CPU Module +4.3” LCD)
  • Working Temp.: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

Processor

  • Atmel SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36
    - ARM Cortex-A5 processor, operates at up to 536MHz (850DMIPS)
    - 16KB data Cache,16KB instruction Cache
    - 32 Kbyte Data Cache, 32 Kbyte Instruction Cache, Virtual Memory System Architecture (VMSA)
    - Fully Integrated MMU and Floating Point Unit (VFPv4)
    - 128KB of SRAM and 160KB of ROM

Memory and Storage

  • 256MB DDR2 SDRAM (512MB is optional)
  • 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM
  • One TF Card slot

Peripheral Interfaces

  • Serial ports
    - 1 x 3-line RS232 Debug serial port (DB-9) 
    - 1 x RS485 serial port
  • 2 x High speed USB HOST
  • 1x Mini USB OTG (be configured as USB device by default)
  • 1 x 10/100/1000Mbps Ethernet for SAMA5D33/34/35/36
  • 2 x CAN interfaces (only for SAMA5D34/35/36)
  • Audio input port
  • Audio output port
  • 1 x LCD interface (Supports 24-bit true color TFT LCD, resolution up to 2048 x 2048 pixels, SAMA5D35 cannot support)
  • 1 x 4-wire touch screen interface
  • 1 x 20-pin standard JTAG interface
  • 1 x Reset button and 2 x User buttons
  • 2 x Power indicators (Red, one on base board and one on CPU module)
  • 1 x User LED (Blue, on CPU module)
  • 2 x User LEDs (One is Blue and one is Red)
  • 3 x expansion interfaces (J4, J5 and J6) bring out:
    - 2 x SPI, 1 x I2C, 2 x SDIO, 6 x ADC, 4x UART, 16-bit Data Bus, 8-bit Address Bus

OS Support

  • Linux 3.6.9
  • Android 4.0.4


MYD-SAMA5D3X-C Base Board


MCC-SAMA5D3X-C CPU Module

Similar Products


MYD-SAMA5D3X Development Board

Hardware Specification

    The Atmel SAMA5D3 series of microprocessor units (MPUs) is based on the ARM® Cortex™-A5 processor, operating at up to 536MHz (850DMIPS) at under 150mW, delivering a high-performance, low-power platform for cost-sensitive industrial and consumer applications. It has comprehensive peripheral set for connectivity and user interface applications including Gigabit and 10/100 Ethernet, up to three HS USB ports, dual CAN, three SDIO/SD/MMC, UARTs, SPIs, TWIs, soft modem, LCD controller with graphics accelerator, camera interface, 12-bit ADC, 32-bit timers and more. Figure 1-3 SAMA5D3 Series Key Features The MYD-SAMA5D3X series development boards include one CPU module mounted on one base board. It exposes many of the Atmel SAMA5D3 features to the user in support of developing specific solutions.

     

    SAMA5D3 Series Key Features

     

    MYD-SAMA5D3X-C Function Block Diagram

     

     

    Dimensions of MYD-SAMA5D3X-C

     

    Software Features

    MYIR has provided software packages on Linux and Android operating systems for the MYD-SAMA5D3X-C Development Board. Please see the features below:



    OS

    Item

    Features

    Description

    Linux

    Boot

    Boot Strap

    First boot program (source code available)

    u-boot

    Secondary boot program (source code available)

    Boot Mode

    Boot Linux from NAND Flash

    Image update

    Support programming kernel image into Nand Flash through USB

    File system update

    Support programming file system into Nand Flash through USB

    Kernel

    Version

    Linux 3.6.9 (source code available)

    File system

    Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS

    File system

    Format

    UBIFS file system

    Drivers

    LED, NandFlash, DataFlash, SD, SPI, CAN, LCD+Touch, Audio, Ethernet, USB, GPIO, Button, RS485, RTC, USART
    (source code available)

    Demo program

    Audio, CAN, RS232, RS485, RTC, GPIO, network, mtd, key_led

    Graphical Library

    QT/Embeded 4.5.3

    Already ported (source code available)

    Android

    Kernel

    Version

    Android 4.0.4

    Drivers

    SD, LCD+touch (LCD and touch screen driver), Audio, Ethernet, USB, Button

    Relative Download and Links

    You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.

     

    1ATMEL SAMA5D3 Summary530 KB
    2ATMEL SAMA5D3 Datasheet11.1 MB
    3MCC-SAMA5D3X-C CPU Module Overview1.01 MB
    4MYD-SAMA5D3X-C Development Board Overview
    1.05 MB

    5MCC-SAMA5D3X-C Dimensions126 KB
    6MYD-SAMA5D3X-C Base Board Dimensions123 KB
    7Android development environment and use Eclipse V1.01.73 MB
    8Build Linux Environment Based on Virtualbox1.77 MB


     


    배송안내

     결제일로부터 1~3주 안에 배송됩니다.

     제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

    교환 및 반품안내

     본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

     상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

    환불안내

     본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

     상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

    AS안내

     제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

    이미지 확대보기MYD-CA5D36-256N256D-I

    MYD-CA5D36-256N256D-I
    • MYD-CA5D36-256N256D-I
    • MYD-CA5D36-256N256D-I
    닫기

    비밀번호 인증

    글 작성시 설정한 비밀번호를 입력해 주세요.

    닫기

    장바구니 담기

    상품이 장바구니에 담겼습니다.
    바로 확인하시겠습니까?

    찜 리스트 담기

    상품이 찜 리스트에 담겼습니다.
    바로 확인하시겠습니까?

    상단으로 이동