Description
The MYD-SAMA5D3X-C Development Board is a low-cost evaluation platform for Atmel’s SAMA5D3 ARM Cortex-A5 processor-based MPU which can operate at up to 536MHz (850DMIPS) at under 150mW and is ideal for various industrial application such as control panels, smart grid devices and bar code scanners - anything that needs high levels of connectivity, enhanced user interfaces, robust security, or battery operation.
The MYD-SAMA5D3X-C Development board is using a base board for MYIR’s MCC-SAMA5D3X-C CPU Module which is a System on Module (SoM) for the heart of the system. The CPU module MCC-SAMA5D3X-C has 256MB DDR2 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM and Gigabit Ethernet PHY on board. It is connected with the base board through two 2.0mm pitch 80-pin male pin headers. The base board has all extended interfaces for software development including RS232 and RS485 serial ports, one 10/100/1000Mbps Ethernet, two CAN, two USB Host and one USB Device, TF card, JTAG and more others. MYIR also offers 4.3- and 7-inch LCD Modules, USB WiFi, Camera, GPS and GPRS modules for this board as options. The Linux, Android SDK and detailed user manual for this board are offered to enable your rapid evaluation and development based on Atmel SAMA5D3 series processors. User can also use the MYD-SAMA5D3X-C board directly as control or display unit for your embedded products.
The MYD-SAMA5D3X-C has following models:
MYD-SAMA5D31-C Development Board – with MCC-SAMA5D31-C CPU Module for Atmel SAMA5D31
MYD-SAMA5D33-C Development Board – with MCC-SAMA5D33-C CPU Module for Atmel SAMA5D33
MYD-SAMA5D34-C Development Board – with MCC-SAMA5D34-C CPU Module for Atmel SAMA5D34
MYD-SAMA5D35-C Development Board – with MCC-SAMA5D35-C CPU Module for Atmel SAMA5D35
MYD-SAMA5D36-C Development Board – with MCC-SAMA5D36-C CPU Module for Atmel SAMA5D36
The main differences can be seen from below table. MYIR deliveries the MYD-SAMA5D36-C model by default.
Item | MYD-SAMA5D31-C | MYD-SAMA5D33-C | MYD-SAMA5D34-C | MYD-SAMA5D35-C | MYD-SAMA5D36-C |
Processor | ATSAMA5D31 | ATSAMA5D33 | ATSAMA5D34 | ATSAMA5D35 | ATSAMA5D36 |
10/100/1000 Ethernet | 0 | 1 | 1 | 1 | 1 |
UART | 2 | 2 | 2 | 2 | 2 |
LCD | 1 | 1 | 1 | 0 | 1 |
CAN | 0 | 0 | 2 | 2 | 2 |
MYD-SAMA5D3X-C Development Board (for Atmel SAMA5D3 Series Processors)
Features
Mechanical Parameters
Processor
Memory and Storage
Peripheral Interfaces
OS Support
MYD-SAMA5D3X-C Base Board
Similar Products
MYD-SAMA5D3X Development Board
Hardware Specification
The Atmel SAMA5D3 series of microprocessor units (MPUs) is based on the ARM® Cortex™-A5 processor, operating at up to 536MHz (850DMIPS) at under 150mW, delivering a high-performance, low-power platform for cost-sensitive industrial and consumer applications. It has comprehensive peripheral set for connectivity and user interface applications including Gigabit and 10/100 Ethernet, up to three HS USB ports, dual CAN, three SDIO/SD/MMC, UARTs, SPIs, TWIs, soft modem, LCD controller with graphics accelerator, camera interface, 12-bit ADC, 32-bit timers and more. Figure 1-3 SAMA5D3 Series Key Features The MYD-SAMA5D3X series development boards include one CPU module mounted on one base board. It exposes many of the Atmel SAMA5D3 features to the user in support of developing specific solutions.
SAMA5D3 Series Key Features
MYD-SAMA5D3X-C Function Block Diagram
Dimensions of MYD-SAMA5D3X-C
Software Features
MYIR has provided software packages on Linux and Android operating systems for the MYD-SAMA5D3X-C Development Board. Please see the features below:
OS | Item | Features | Description | |
Linux | Boot | Boot Strap | First boot program (source code available) | |
u-boot | Secondary boot program (source code available) | |||
Boot Mode | Boot Linux from NAND Flash | |||
Image update | Support programming kernel image into Nand Flash through USB | |||
File system update | Support programming file system into Nand Flash through USB | |||
Kernel | Version | Linux 3.6.9 (source code available) | ||
File system | Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS | |||
File system | Format | UBIFS file system | ||
Drivers | LED, NandFlash, DataFlash, SD, SPI, CAN, LCD+Touch, Audio, Ethernet, USB, GPIO, Button, RS485, RTC, USART | |||
Demo program | Audio, CAN, RS232, RS485, RTC, GPIO, network, mtd, key_led | |||
Graphical Library | QT/Embeded 4.5.3 | Already ported (source code available) | ||
Android | Kernel | Version | Android 4.0.4 | |
Drivers | SD, LCD+touch (LCD and touch screen driver), Audio, Ethernet, USB, Button | |||
Relative Download and Links
You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.
● 결제일로부터 1~3주 안에 배송됩니다.
● 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.
● 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.
● 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
● 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.
● 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
● 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?