To optimize the cost and lead time, MYIR has launched Z-turn Board V2 for replacement of the Z-turn Board.  The hardware is fully compatible. Please contact MYIR for any queries.

Z-turn Board V2: https://www.myirtech.com/list.asp?id=708

The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010) or Zynq-7020 (XC7Z020) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.
 

The Z-turn Board takes full features of the  Xilinx Z-7010 / Z-7020 SoC, it has 1GB DDR3 SDRAM and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 96 / 106 user I/O and configurable as up to 39 LVDS pairs I/O.

Z-turn Board - Xilinx Zynq-7010 / 7020 Single Board Computer

The Z-turn Board is capable of running Linux operating system. MYIR has provided Linux 4.14.0 SDK, the kernel and many drivers are in source code. MYIR also provides a MYIR-PYNQ project to support Python development on the Z-turn Board. The board is delivered with complete accessory kit including two USB cables, one Ethernet cable, one HDMI cable, one 16GB TF card and one 5V power adapter and product CD-ROM which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional WiFi and camera modules, Z-turn IO Cape for the Z-turn Board. The Z-turn IO Cape provides many peripheral signals and interfaces including ADC, GPIO, LCD, Camera and three Pmod interfaces.
 

The Z-turn Board is an excellent development platform for evaluating and prototyping for Zynq-7000 SoC. It can also be used as a System-on-Module (SOM) for your next embedded design; typical applications are Industrial Automation, Test & measurement, Medical Equipment, Intelligent Video Surveillance, Aerospace and military, etc.

Features

Z-turn Board in the Video

- MYIR Z-turn Board Xilinx 7-series FPGA logic ARM Cortex-A9 System-on-Chip
- How to debug the Xilinx zynq-7020 Z-turn board 01
- How to debug the Xilinx zynq-7020 Z-turn board 02
- How to build a boot.bin bootstrap on Xilinx ZYNQ Z-turn board
- gpio mio project based on Xilinx zynq-7020 Z-turn board
- gpio emio project based on Xilinx zynq-7020 Z-turn board
- Hello world tutorial vivado

Z-turn Board

Z-turn IO Cape

Z-turn IO Cape (an IO extension board for Z-turn Board)

Z-turn Board Mounted on Z-turn IO Cape 

Hardware Features 

The Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.

The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix®-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex®-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.

ZYNQ-7000 Device Family

Zynq-7000 Devices

Z-turn Board Function Block Diagram

Z-turn Board Dimension Chart (Top-view)

Z-turn Board Dimension Chart (Bottom-view)

Software Features

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.

1	Xilinx Zynq-7000 Overview	658 KB
2	Z-turn Board Overview	1.02 MB
3	Z-turn Board Dimensions	150 KB
4	Z-turn Board track length for I/O	62 KB
5	Z-turn Board Schematic	682 KB
6	Z-turn Board Quick Start Guide	223 KB
7	Z-turn IO Cape Schematic	177 KB
8	MYIR PYNQ User Manual	876 KB
9	A Hello World tutorial for Z-turn board (written by Mr. Juan Abelaira of Akteevy)	0.99 MB
10	Z-turn Board Tutorial Book (written by Mr.Joseph Attard, Senior lecturer from Malta College)	23.20 MB

Z-turn Board Supports Xilinx JTAG Cable

Testing HDMI of Z-turn Board

Z-turn Board