MYS-7Z020-V2-0E1D-766-C 이미지 확대 보기
  • MYS-7Z020-V2-0E1D-766-C

MYS-7Z020-V2-0E1D-766-C

공유
짧은설명
Z-turn Kit (Xilinx Zynq-7020)
판매가
236,500 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
44,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617680
제조사
MYIR Tech
MYS-7Z020-V2-0E1D-766-C
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보

 

- 667MHz Xilinx XC7Z010/020 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
- 1GB DDR3 SDRAM (2 x 512MB, 32-bit), 16MB QSPI Flash
- USB_UART, USB2.0 OTG, 1 x 10/100/1000Mbps Ethernet, CAN, HDMI, TF, …
- Onboard Three-axis Acceleration Sensor and Temperature Sensor
- Supports Optional Camera Module and Z-turn IO Cape
- Ready-to-Run Linux Single Board Computer
- Supports Python Development

 

To optimize the cost and lead time, MYIR has launched Z-turn Board V2 for replacement of the Z-turn Board.  The hardware is fully compatible. Please contact MYIR for any queries.

Z-turn Board V2: https://www.myirtech.com/list.asp?id=708

 

The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010) or Zynq-7020 (XC7Z020) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.
 

The Z-turn Board takes full features of the  Xilinx Z-7010 / Z-7020 SoC, it has 1GB DDR3 SDRAM and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 96 / 106 user I/O and configurable as up to 39 LVDS pairs I/O.

 

Z-turn Board - Xilinx Zynq-7010 / 7020 Single Board Computer

 

The Z-turn Board is capable of running Linux operating system. MYIR has provided Linux 4.14.0 SDK, the kernel and many drivers are in source code. MYIR also provides a MYIR-PYNQ project to support Python development on the Z-turn Board. The board is delivered with complete accessory kit including two USB cables, one Ethernet cable, one HDMI cable, one 16GB TF card and one 5V power adapter and product CD-ROM which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional WiFi and camera modules, Z-turn IO Cape for the Z-turn Board. The Z-turn IO Cape provides many peripheral signals and interfaces including ADC, GPIO, LCD, Camera and three Pmod interfaces.
 

The Z-turn Board is an excellent development platform for evaluating and prototyping for Zynq-7000 SoC. It can also be used as a System-on-Module (SOM) for your next embedded design; typical applications are Industrial Automation, Test & measurement, Medical Equipment, Intelligent Video Surveillance, Aerospace and military, etc.

 

Features

 

Item

Features

SoC

Xilinx XC7Z010-1CLG400 (Zynq-7010) or XC7Z020-2CLG400 (Zynq-7020)
- 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
- Integrated Artix-7 class FPGA subsystem
with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)

NEON™ & Single / Double Precision Floating Point for each processor
Supports a Variety of Static and Dynamic Memory Interfaces

Memory

1GB DDR3 SDRAM (2 x 512MB, 32-bit)

Storage

16MB QSPI Flash

TF card interface

Communications

1 x 10/100/1000M Ethernet

1 x CAN

1 x Mini USB2.0 OTG

1 x USB-UART debug interface

Display

1 x HDMI (supports 1080p resolution)
- We offer reference design for HDMI and LCD display functions without limitation for its. The IP cores in the design are provided by Xilinx. MYIR will provide Vivado project and SDK testing programs.

- We also offer reference design for using evaluation version of Xylon's logiCVC-ML and logiCLK IP core. Please contact Xylon to buy the license of the IP core for logiCVC-ML or logiCLK.

http://www.logicbricks.com/Products/logiCVC-ML.aspx 

http://www.logicbricks.com/Products/logiCLK.aspx

User I/O

Brought out via two 1.27mm pitch 80-pin SMT female connectors
- 90/106 user I/O (7010/7020)
Configurable as up to 39 LVDS pairs I/O

Dimensions

63mm x 102mm x 1.6mm (8-layer PCB design)

Power supply

USB power supply or DC 5V/2A

Working Temp.

0~70 Celsius (commercial grade)

Others

Onboard three-axis acceleration sensor and temperature sensor
1 x 2.54mm pitch 14-pin JTAG interface
2 x Buttons (1x Reset, 1 x User)
4-channel toggle switch
5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED)
1 x Buzzer

OS support

Linux 4.14.0

Target Applications

Evaluation and Prototyping for Zynq-7000 AP SoC

Industrial Automation

Test & measurement

Medical Equipment

Intelligent Video Surveillance

Aerospace and military

 

 

Z-turn Board in the Video

MYIR Z-turn Board Xilinx 7-series FPGA logic ARM Cortex-A9 System-on-Chip
How to debug the Xilinx zynq-7020 Z-turn board 01
How to debug the Xilinx zynq-7020 Z-turn board 02
How to build a boot.bin bootstrap on Xilinx ZYNQ Z-turn board
gpio mio project based on Xilinx zynq-7020 Z-turn board
gpio emio project based on Xilinx zynq-7020 Z-turn board
Hello world tutorial vivado

 

Z-turn Board


Z-turn IO Cape

 

Z-turn IO Cape (an IO extension board for Z-turn Board)


Z-turn Board Mounted on Z-turn IO Cape 

 

Hardware Features 

The Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.

 

The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix®-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex®-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.

 

ZYNQ-7000 Device Family

 

 


Zynq-7000 Devices

 

Z-turn Board Function Block Diagram

 

Z-turn Board Dimension Chart (Top-view)



Z-turn Board Dimension Chart (Bottom-view)

 

Software Features

 

Item

Features

Description

Cross compiler

gcc 6.2.1

gcc version 6.2.1 (Linaro GCC Snapshot 6.2-2016.11)

Boot program

BOOT.BIN

First boot program including FSBL, bitstream and u-boot

Linux Kernel

Linux 4.14.0

Customized kernel for Z-turn Board

Drivers

USB OTG

USB OTG driver

Ethernet

Gigabit Ethernet driver

MMC/SD/TF

MMC/SD/TF card driver

CAN

CAN driver

LCD Controller

LCD driver

HDMI

HDMI driver

Button

Button driver

UART

UART driver

LED

LED driver

GPIO

GPIO driver

Buzzer

Buzzer driver

G-Sensor

Three-axis acceleration sensor driver

Tempreture

Sensor

Temperature sensor driver

File System

Ramdisk

Ramdisk system image

Ubuntu Desktop 18.04

Tar file


 

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.


1Xilinx Zynq-7000 Overview658 KB
2Z-turn Board Overview1.02 MB
3Z-turn Board Dimensions150 KB
4Z-turn Board track length for I/O62 KB
5Z-turn Board Schematic682 KB
6Z-turn Board Quick Start Guide223 KB
7Z-turn IO Cape Schematic
177 KB

8
MYIR PYNQ User Manual876 KB
9A Hello World tutorial for Z-turn board (written by Mr. Juan Abelaira of Akteevy)0.99 MB
10Z-turn Board Tutorial Book (written by Mr.Joseph Attard, Senior lecturer from Malta College)
23.20 MB

 

Z-turn Board Supports Xilinx JTAG Cable

 

 

Testing HDMI of Z-turn Board



Z-turn Board


 

 

 

배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기MYS-7Z020-V2-0E1D-766-C

MYS-7Z020-V2-0E1D-766-C
  • MYS-7Z020-V2-0E1D-766-C
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동