MYD-C7Z020-V2-4E1D-766-I 이미지 확대 보기
  • MYD-C7Z020-V2-4E1D-766-I

MYD-C7Z020-V2-4E1D-766-I

공유
짧은설명
MYD-C7Z020-V2 Development Board (industrial grade)
판매가
488,400 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
44,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617691
제조사
MYIR Tech
MYD-C7Z020-V2-4E1D-766-I
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보

- MYC-C7Z010/20-V2 CPU Module as Controller Board
- Xilinx XC7Z010/20 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
- 1GB DDR3 SDRAM (2 x 512MB, 32-bit)
- 4GB eMMC, 32MB QSPI Flash
- 4 x USB2.0 Host, Gigabit Ethernet, CAN, HDMI, LCD, TF
- 1 x XADC, 3 x PMoD, 1 x FMC
- Optional 4.3 or 7 inch LCD/TSP
- Ready-to-Run Linux 4.14.0 

 

Description

MYIR is a Xilinx Alliance Member, welcome to use MYIR's Xilinx products!

We also offer custom design services, welcome your inquiry!

http://www.xilinx.com/alliance/memberlocator/1-2wv1bc.html

 

The MYD-C7Z010/20-V2 development board is built around the MYC-C7Z010/20-V2 CPU Module which is a compact Linux-ready ZYNQ-based SOM (System on Module). The MYC-C7Z010/20-V2 combines the Xilinx Zynq-7010 or Zynq-7020 SoC device, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. It is connected to the MYD-C7Z010/20 base board through two 0.8mm pitch 140-pin board-to-board connectors.

 

The MYD-C7Z010/20-V2 development board takes full features of the Zynq-7010 and Zynq-7020 SoCs’ powerful dual-core ARM Cortex-A9 processing system and Xilinx 7-series Field Programmable Gate Array (FPGA) logic unit to create a rich set of peripherals to the base board through headers and connectors including one RS232 serial port, four USB Host ports, one Gigabit Ethernet port, CAN, HDMI, LCD/Touch screen, TF card slot, RTC, one XADC header to allow you take advantage of Xilinx XADC; it has three PMoD headers to meet your I/O needs with PMoDs (only for 7020); it also has low-pin count FMC connector to allow various FMC cards for custom I/O options. User can integrate a MYC-C7Z010-V2 or a MYC-C7Z020-V2 SOM on the same base board, thus making two variants of Zynq evaluation boards.

MYD-C7Z010-V2 Development Board – with MYC-C7Z010-V2 CPU Module for Xilinx XC7Z010

MYD-C7Z020-V2 Development Board – with MYC-C7Z020-V2 CPU Module for Xilinx XC7Z020

mydc7z0x0v2_172652.jpg
MYD-C7Z010/20-V2 Development Board 

 

The MYD-C7Z010/20-V2 development board is delivered with necessary cable accessories and MYIR offers optional 4.3-inch and 7-inch LCD Module. The board is preloaded with Linux. It is a high-performance and low-cost development platform for evaluation and prototype based on Xilinx Zynq-7000 All Programmable SoC family.

 

Features

Mechanical Parameters

  • Dimensions: 190mm x 110mm (base board), 75mm x 55mm (CPU Module)
  • PCB layers: 4-layer design (base board), 10-layer design (CPU Module)
  • Power supply: 12V/0.5A (base board), 5V/0.5A (CPU Module)
  • Working temp.: 0~70 Celsius or -40~85 Celsius (industrial grade)

The MYD-C7Z010/20-V2 Controller Board (MYC-C7Z010/20-V2 CPU Module)


mycc7z0x0top_172751.jpg
MYC-C7Z010/20-V2 Top-view 

 

mycc7z0x0bottom_172806.jpg
MYC-C7Z010/20-V2 Bottom-view 

SoC

  • Xilinx XC7Z010-1CLG400 (Zynq-7010) or XC7Z020-1CLG400/XC7Z020-2CLG400 (Zynq-7020)
  • - 667MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
    - Integrated Artix-7 class FPGA subsystem
    with 28K logic cells, 17,600 LUTs, 80 DSP slices (for XC7Z010)
    with 85K logic cells, 53,200 LUTs, 220 DSP slices (for XC7Z020)
    - NEON™ & Single / Double Precision Floating Point for each processor
    - Supports a Variety of Static and Dynamic Memory Interfaces

Memory

  • 1GB DDR3
  • 4GB eMMC
  • 32MB QSPI Flash (16MB is optional)

Peripherals and Signals Routed to Pins

  • 10/100/1000M Ethernet PHY (YT8531SH)
  • External watchdog
  • Three LEDs
  • - One blue LED for power indicator
    - One red LED for FPGA program done indicator
    - One green user LED
  • Two 0.8mm pitch 140-pin board-to-board expansion connectors bring out below signals:
    - One Gigabit Ethernet
    - One USB OTG 2.0
    - Two Serial ports
    - Two I2C
    - Two CAN BUS
    * Serial ports, I2C and CAN signals will be reused in PS part, or implemented through PL pins
    - Two SPI (can be implemented through PL pins)
    - ADC (one independent differential ADC, 16-channel ADC brought out through PL pins)
    - One SDIO

The MYD-C7Z010/20-V2 Base Board (MYB-C7Z010/20)

MYB-C7Z01020_172824.jpg

 

PS Unit

  • Four USB 2.0 Host ports (through USB Hub)
  • One RS232 (DB9 port)
  • One TF card slot (bootable)
  • One CAN interface
  • One 10/100/1000M Ethernet
  • One 2.54mm pitch 14-pin JTAG interface (PS, PL reused)
  • Battery backed RTC
  • One User Button (One I2C, can be connected to LCD and Resistive Touch Screen)
  • Jumpers
  • - One for booting selection from TF card or QSPI
    - One for JTAG selection for using PS and PL reused or independent JTAG configured through PL pins
    - One for selection if adding FMC module to JTAG

PL Unit

  • One XADC interface
  • One Xilinx standard LPFMC interface
  • One HDMI interface (16-bit YCrCb, support 1080p display, do not support audio)
  • LCD/Touch screen interface (16-bit RGB, signals reused with HDMI, supports resistive and capacitive touch screen)
  • Two LEDs (one for FMC module detection, one for power indicator)
  • Three-channel PMoD (only for XC7Z020)

OS Support

  • Linux 4.14.0

 

Other MYIR's Xilinx Products

http://www.myirtech.com/xilinxseries.asp

Z-turn Board Single Board Computer (based on Zynq-7010 / 7020)

Z-turn Lite Single Board Computer (based on Zynq-7007S / Zynq-7010)

MYD-C7Z015 Development Board (MYC-C7Z015 CPU Module as core board)

MYD-Y7Z010/20 Development Board (MYC-Y7Z010/20 CPU Module as core board)

MYD-Y7Z010/20-V2 Development Board (MYC-Y7Z010/20-V2 CPU Module as core board)

MYD-CZU3EG/4EV/5EV Development Board (MYC-CZU3EG/4EV/5EV CPU Module as core board)

VECP Starter Kit - a complete Vision Edge Computing Platform (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)

FZ5 Card (AI Accelerator Card based on Zynq UltraScale+ ZU5EV MPSoC)

FZ3 Card - deep learning accelerator card (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)

배송안내

 결제일로부터 1~3주 안에 배송됩니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

환불안내

 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

AS안내

 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

이미지 확대보기MYD-C7Z020-V2-4E1D-766-I

MYD-C7Z020-V2-4E1D-766-I
  • MYD-C7Z020-V2-4E1D-766-I
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동