TE0706-03 이미지 확대 보기
  • TE0706-03
  • TE0706-03
  • TE0706-03

TE0706-03

공유
짧은설명
TE0706 - Carrierboard for Trenz Electronic Modules with 4 x 5 cm Form factor
판매가
견적문의 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
143,000원
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617702
제조사
Trenz Electronic

상품상세정보

Product information "TE0706 - Carrierboard for Trenz Electronic Modules with 4 x 5 cm Form Factor"

This article is the replacement for the TE0706-02 carrier board. All changes caused by the new revision are included in the Product Change Notification (PCN).

The TE0706 carrier board provides functionalities for testing, evaluation and development purposes of Trenz Electronic 4 x 5 cm SoMs. It is mainly for the use with TE0720 and TE0715 modules. The carrier board is equipped with various components and connectors for different configuration setups and needs. The interfaces of the SoMs functional units and PL I/O-banks are connected via board-to-board connectors to the carrier board's components and connectors for easy user access.

Supported functional range for all Trenz Electronic 4 x 5 cm carrier boards.

Features

  • 3 x Samtec LSHM series Board to Board connectors
  • VG96 connector (mounting holes and solder pads, J6) and 50-pin IDC male connector socket (J5) for access to PL I/O-bank pins
  • USB2.0 type A connector, or optionally Micro USB 2.0 connector
  • 1 x RJ45 GbE MagJack (J3), connected via MDI to B2B connector JB1
  • 1 x GbE PHY, providing Ethernet interface in conjunction with RJ45 GbE MagJack (J2)
  • 4A High-Efficiency Power SoC DC-DC Step-Down Converter for 3.3V power supply
  • XMOD JTAG-/UART-header JX1
  • 1 x TE0790-02, XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
  • Micro SD card socket
  • SDIO port expander with voltage-level translation and jumper (J13) for selection of SDIO voltage on SoM side
  • DIP-switches S1 to set SoM's control signals
  • 1 x user-push button (S2), by default configured as system reset button
  • 3 x VCCIO selection jumper J10, J11 and J12 to set SoM's PL I/O-bank voltages
  • 5V power supply barrel jack
  • Size: 64.5 x 100 mm

Scope of Delivery

  • 1 x TE0706-03 carrier board for Trenz Electronic modules with a form factor 4 x 5 cm
  • 1 x TE0790-02, XMOD FTDI JTAG Adapter - Xilinx compatible (pre-assembled)
  • 1 x VG96 socket connector vertical (DIN 41612), female, series 0903, manufacturer part no. 09032966825

Additional Information

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "TE0706 - Carrierboard for Trenz Electronic Modules with 4 x 5 cm Form Factor"

    배송안내

     결제일로부터 1~3주 안에 배송됩니다.

     제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

    교환 및 반품안내

     본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.

     상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

    환불안내

     본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.

     상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.

    AS안내

     제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다. 

    이미지 확대보기TE0706-03

    TE0706-03
    • TE0706-03
    • TE0706-03
    • TE0706-03
    닫기

    비밀번호 인증

    글 작성시 설정한 비밀번호를 입력해 주세요.

    닫기

    장바구니 담기

    상품이 장바구니에 담겼습니다.
    바로 확인하시겠습니까?

    찜 리스트 담기

    상품이 찜 리스트에 담겼습니다.
    바로 확인하시겠습니까?

    상단으로 이동