Product information ""ZynqBerry" Module with Xilinx Z-7007S Single-Core, Raspberry Pi 2 compatible"

This article is the replacement for the TE0726-03-07S-1C.
Overview of all previous Product Change Notifications (PCNs) for this module.

The Trenz Electronic TE0726-03-11C64-A is a Raspberry Pi 2 compatible FPGA module integrating a Xilinx Zynq-7007S SoC, 512 MByte DDR3L SDRAM, four USB ports, an Ethernet port and 16 MByte Flash memory for configuration und operation. A microSD connector provides additional data storage.

This device contains a single-core ARM Cortex-A9 processor and represents the lowest cost entry point to the scalable Zynq-7000 platform.

All parts are at least commercial temperature range of 0°C to +70°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Notice

Do not access the FT2232H EEPROM using FTDI programming tools, doing so will erase normally invisible user EEPROM content and invalidate stored Xilinx JTAG license. Without this license the on-board JTAG will not be accessible any more with any Xilinx tools. Software tools from FTDI website do not warn or ask for confirmation before erasing user EEPROM content.

Features

• Xilinx Zynq XC7Z007S-1CLG225C
  • 512 MByte DDR3L SDRAM
  • 16 MByte Flash
  • Single-Core ARM Cortex-A9 MPCore up to 766MHz
• Raspberry Pi Model 2 form factor
• LAN9514 USB Hub with Ethernet
  
  • 4 x USB with power switches
  • 100 Mbit Ethernet RJ45
• Micro SD card slot
• HAT header with 26 I/O's
• HDMI type A
• DSI connector (display)
• CSI-2 connector (camera)
• Micro USB
  • Power input
  • USB UART
  • JTAG ARM and FPGA debug
• 3.5 mm audio plug (PWM Audio output only)
• Size: 6.35 x 9.3 cm

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado HL WebPACK Edition (free version)

The Vivado Design Suite HL WebPACK Edition is the FREE version of the design suite. Vivado HL WebPACK delivers instant access to some basic Vivado features and functionality at no cost.

Overview of all editions of Vivado Design Suite

Scope of Delivery

• 1 x TE0726-03-11C64-A Trenz Electronic "ZynqBerry" module with Xilinx single-core Zynq Z-7007S

Additional Information

• Manufacturer's article number: TE0726-03-11C64-A
• Trenz Electronic TE0726 Wiki
• Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to ""ZynqBerry" Module with Xilinx Z-7007S Single-Core, Raspberry Pi 2 compatible"

•  Do you have any questions concerning this product?
•  Wiki
•  Further products by Trenz Electronic GmbH