Product information "FPGA Module with AMD Artix™ 7 100T (Variante 2D), 2 x 50 Pin, 1.8V, industrial"

This product is not always in stock, but will be produced on customer order (on demand).
Please ask for any minimum quantities.

 

All changes made so far for the TE0725 module can be found in the Product Change Notifications (PCNs).

The Trenz Electronic TE0725LP-01-72I-1T is a low cost small-sized FPGA module integrating a AMD/Xilinx Artix™ 7 100T and 64 MByte Flash memory for configuration and operation. The 2 x 50 pin headers with a 2.54 mm standard pitch are perfect for breadboard or low cost dual layer PCB.

This reference design is bundled with a FREE evaluation edition of the low-cost, commercially proven, high performance memory controller IP supplied by Synaptic Laboratories Ltd (SLL). This free IP evaluation license never expires, and no customer registration or NIC ID is required.
Click here to find the latest free trials of SLL’s memory controller IP for HyperBus, OctaBus, Xccela Bus, JEDEC xSPI Profile 1.0 and JEDEC xSPI Profile 2.0 for Intel, Microchip, and AMD/Xilinx FPGA. SLL IP is also qualified for use with Trenz Electronic HS CRUVI enabled boards. Please send all sales enquiry and technical support questions for SLL’s IP to info@synaptic-labs.com.

All parts are at least industrial temperature range of -40°C to +85°C. The module operating temperature range depends on customer design and cooling solution. Please contact us for options.

Key Features

• AMD/Xilinx Artix™ 7 XC7A100T-2CSG324I
• Industrial temperature range
• 64 MByte Flash memory
• 2 x 50 pin headers with 2.54 mm pitch, ideal for breadboard use
• 1.8 V single supply with on board voltage regulators
• 95 I/O's (42 + 42 + 3 + 8)
• 25 MHz system clock (100 MHz can be customized on request)
• I2C EEPROM
• 7.3 x 3.5 cm form factor
• JTAG/UART connector
• One user LED
• Optional HyperRAM (8 to 32 MByte) or HyperFlash
  HyperRAM from Cypress cypress.com/products/hyperram-memory
  HyperFlash from Cypress cypress.com/products/hyperflash-nor-flash-memory

Other assembly options for cost or performance optimization plus high volume prices available on request.

Recommended Software

Vivado ML Standard Edition (free version)

The Vivado ML Standard Edition is the FREE version of the Vivado design suite. Vivado ML Standard delivers instant access to some basic Vivado features and functionality at no cost.

Overview of all editions of Vivado ML

Scope of Delivery

• 1 x TE0725LP-01-72I-1T Trenz Electronic FPGA module with AMD/Xilinx Artix™ 7 100T and soldered pin headers (J1, J2 pin headers soldered on bottom, J3 missing, JB1 soldered on top)

Additional Information

• Manufacturer's article number: TE0725LP-01-72I-1T
• Trenz Electronic TE0725LP Wiki
• Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "FPGA Module with AMD Artix™ 7 100T (Variante 2D), 2 x 50 Pin, 1.8V, industrial"

•  Do you have any questions concerning this product?
•  Wiki
•  Further products by Trenz Electronic GmbH