XEM6310MT-LX150T

HOME >

Opal Kelly

XEM6310MT-LX150T

짧은설명: USB 3.0 integration module based on the Xilinx Spartan-6 LXT FPGA

판매가: 1,991,000원 <관세ㆍ부가세 포함>

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비: 88,000원

택배

방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호

상품코드: 1000617798

제조사: Opal Kelly

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

The XEM6310MT is a USB 3.0 integration module based on the remarkably-capable Xilinx Spartan-6 LXT FPGA. In addition to a high gate-count FPGA, the XEM6310MT utilizes the high transfer rate of USB 3.0 for configuration downloads, enabling speedy FPGA configuration and data transfer. With integrated SDRAM, power supplies, platform flash, and high-speed transceivers, the XEM6310MT is ideal for high-performance I/O integration.

USB 3.0 SuperSpeed Performance

Real-world measured performance at over 300 MiB/s is possible with the FrontPanel API and SuperSpeed USB 3.0 connections.

On-Board SDRAM

Built with an integrated 128-MiB SDRAM, the XEM6310MT has abundant on-board memory for high-performance applications, including data and image acquisition as well as signal processing.

FrontPanel SDK

Opal Kelly’s FrontPanel SDK is an easy-to-use, robust API for communication, configuration, and interfacing to your PC. FrontPanel handles all the interaction between your software and the FPGA internals, dramatically reducing the time and effort required to interface to a design.

Prototyping and OEM Integration

The XEM6310MT is ideally suited to prototyping systems and integration into OEM devices where a USB interface, flexible hardware solution, or PC software interface would be useful. The XEM6310MT can easily be added to a new board design to provide turnkey USB integration with the convenience of the FrontPanel programmer’s interface and existing USB drivers.

Product Comparison

Feature	XEM6310-LX45	XEM6310MT-LX45T
Interface Measured Performance	USB 3.0 SuperSpeed Up to 335 MB/s
FPGA Minimum Xilinx Tools Required	XC6SLX45-2 ISE WebPack	XC6SLX45T-2 ISE WebPack
Slice Architecture	4 6-LUT, 8 DFF
Slices	6,822 (54,576 DFFs)
FPGA RAM	2,088 Kib BlockRAM 401 Kib Distributed
PCIe Endpoint Blocks	0	1
GTP Transceivers	0	4
MULT / DSP¹	58
MCB²	✓
PLLs	✓ (4 CMT)
On-Board DDR2 Banks, Width, Peak Bandwidth	128 MiB One, x16, 10 Gb/s
Expansion	2x 80-pin 0.8mm BSE-040	2x 80-pin 0.5mm QSE-040 1x 40-pin 0.5mm QSE-020
System Flash FPGA Bootable?	128 Mib Yes
FPGA Flash FPGA Bootable?	128 Mib No

¹ Spartan-6 DSP blocks include MULT and integrated 48-bit accumulator.
² Spartan-6 MCBs (memory controller blocks) reduce the fabric resources consumed for memory support.

Applications

Image or video capture / processing
Data acquisition
ASIC / hardware-based simulation and verification
High-Speed (Gigabit) Serial Interfaces
Digital communications

High-speed USB / FPGA co-processor
Evaluation platform for your product
Custom test equipment
Cryptography
Data Security

Block Diagram

XEM6310MT Block Diagram

Gigabit Serial Transceivers (x4)

Four high-speed gigabit transceivers are available with standard support for PCI Express, DisplayPort, HD-SDI, XAUI, Aurora, SATA, and others operating up to 2.5 Gb/s (3.125 Gb/s optional).

USB 3.0 SuperSpeed Performance

Measured performance at over 300 MiB/s for real-world data transfers to/from the PC.

128 MiB DDR2

Integrated 128-MiByte DDR2 provides plenty of on-board memory for high-performance applications, including image capture and data acquisition.

Switching Power Supplies

High-efficiency switching power supplies provide stable, dependable power to the FPGA. In most applications, there is enough extra juice to also supply your board.

Features & Specifications

Xilinx Spartan-6 XC6SLX45T-2FGG (option: XC6SLX150T-2FGG)
2x 16-MiB serial flash (Numonyx N25Q128A)
128-MiB DDR2 (Micron MT47H64M16HR)
Small form-factor -- 75mm x 60mm x 7.85mm (2.95" x 2.36" x 0.31")
High-speed USB 3.0 interface (Cypress FX3) for configuration and data transfer
Measured performance over 315 MiB/s
Self-powered by external DC source
2x Low-jitter 100 MHz clock oscillators (one reserved for GTP REFCLK)
Eight LEDs
Two 80-pin 0.5mm Samtec board-to-board connectors (QSE-040)
Single 40-pin 0.5mm Samtec board-to-board connector (QSE-020) for GTP
116 user I/O including GCLK pins on expansion connectors
4 gigabit transceivers and 3 reference clock pairs
Independent access to VCCO bank voltages
JTAG pins available on the expansion connectors
Full FrontPanel virtual control panel support
Complete Application Programmer's Interface (API) in C, C++, C#, Ruby, Python, and Java

Note: Firmware source code is not included. Full documentation on designing the XEM6310MT into your application is contained in the XEM6310MT User's Manual and FrontPanel User's Manual. Please see the Library items on this page.