VEEK-MT2S 이미지 확대 보기
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S

VEEK-MT2S

공유
짧은설명
The VEEK-MT2S Development Kit / K0161
판매가
1,419,000 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
0원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000617951
제조사
Terasic Technologies
VEEK-MT2S
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보


▶ Product Description

The VEEK-MT2S Development Kit is a comprehensive embedded design environment with everything  developers need to create processing-based systems. The VEEK-MT2S delivers an integrated platform including hardware, design tools, and reference designs for developing embedded software and hardware platforms in a wide range of applications. The fully integrated kit allows developers to rapidly customize their processor and IP to best suit their specific application. The VEEK-MT2S features a DE10-Standard development board targeting Intel Cyclone® V SX SoC FPGA, as well as a capacitive LCD multimedia color touch panel which supports 5-point multi-touch and gestures.

The all-in-one embedded solution offered on the VEEK-MT2S, in combination with LCD touch panel and digital image module, provides developers the ideal platform for multimedia applications with unparallel processing performance. Developers can benefit from the use of FPGA-based embedded processing system utilizing mitigating design risk and obsolescence, design reuse, reducing bill of material (BOM) costs by integrating powerful graphics engines within the FPGA.

Please refer to the VEEK-MT2S Control Panel for SoC reference design in Linux touch-screen display.

Component Solution for Altera FPGAs

* ClockSolution *  Power Solution * Ethernet Solution * SDRAM Memory Solution
   
       
  * Inductive Component Solution * Capacitive Component Solution * ADC, Video, Accelerometer and Reset Generator Solution
    

 


▶ Specifications

DE10-Standard Development Board

Cyclone V SX SoC—5CSXFC6D6F31C6N

  • Dual-core ARM Cortex-A9 (HPS)
  • 110K programmable logic elements
  • 5,761 Kbits embedded memory
  • 6 fractional PLLs
  • 2 hard memory controllers

Configuration Sources

  • Serial configuration device – EPCS128 for the FPGA
  • On-board USB Blaster II (normal type B USB connector)

Memory Device

  • 64MB (32Mx16) SDRAM for the FPGA
  • 1GB (2x256MBx16) DDR3 SDRAM for the HPS
  • microSD card socket for the HPS

Peripherals

  • Two USB 2.0 Host Ports (ULPI interface with USB type A connector) on HPS
  • UART to USB (USB Mini B connector)
  • 10/100/1000 Ethernet
  • PS/2 mouse/keyboard
  • IR emitter/receiver
  • I2C multiplexer

Connectors

  • One HSMC expansion header (used for MTLC2)
  • One 40-pin expansion header
  • One 10-pin ADC input header
  • One LTC connector (one Serial Peripheral Interface (SPI) master ,one I2C bus, and one GPIO interface)

Display

  • 24-bit VGA DAC
  • 128x64 dots LCD Module with Backlight on HPS

Audio

  • 24-bit CODEC, Line-in, line-out, and microphone-in jacks

Video Input

  • TV decoder (NTSC/PAL/SECAM) and Video-in connector

ADC

  • Sample rate: 500 KSPS
  • Channel number: 8
  • Resolution: 12 bits
  • Analog input range : 0 ~ 4.096 V

Switches, Buttons and LEDs

  • 5 user keys (4 for the FPGA and 1 for the HPS)
  • 10 user switches for the FPGA
  • 11 user LEDs (10 for the FPGA and 1 for the HPS)
  • 2 HPS reset buttons (HPS_RESET_n and HPS_WARM_RST_n)
  • Six 7-segment displays

Sensors

  • G-Sensor on HPS

Power

  • 12V DC input

Capacitive Multi-touch Screen Module

LCD Display

  • 7-inch TFT LCD with pixel resolution of 800*480
  • 16 million colors (8-bit RGB)
  • LED backlight

Capacitive Multi-Touch

  • Five points multi-touch
  • I2C interface
  • Gesture supporting

 

Gesture Table

  • One Point

   

  • Two-Point

8-Megapixel Digital Image Sensor

  • 3,264H x 2,448V active pixels with Bayer color arrangement
  • Sensitivity 940mV/Lux-sec
  • Gesture supporting

Ambient Light Sensor

  • Precise illumination measurement under diverse lighting conditions
  • Programmable interrupts
  • 16-bit digital output with I2C fast-mode at 400 kHz
  • Programmable analog gain and Integration time
  • 50/60Hz lighting ripple rejection

MPU9250 Accelerometer Features

  • Digital-output triple-axis accelerometer
  • Programmable full scale range of ±2g, ±4g, ±8g and ±16g and integrated 16-bit
  • Self-test

MPU9250 Gyroscope Features

  • Digital-output X-, Y-, and Z-Axis angular rate sensors
  • User-programmable full-scale range of ±250, ±500, ±1000, and ±2000°/sec and integrated 16-bit ADCs
  • Self-test

MPU9250 Magnetometer Features

  • 3-axis silicon monolithic Hall-effect magnetic sensor with magnetic concentrator
  • Wide dynamic measurement range and high resolution with lower current consumptions
  • Output data resolution of 14 bit (0.6μT/LSB) or 16 bit (15μT/LSB)
  • Full scale measurement range is ±4800μT
  • Magnetometer normal operating current: 280μA at 8Hz repetition rate
  • Self-test function with internal magnetic source to confirm magnetic sensor operation on end products

 

▶ Layout 

 

 

  • Size: 157.56X227.97mm


▶ Resources
 

 

Documents

TitleVersionSize(KB)Date AddedDownload
VEEK-MT2S User Manual1.037992017-05-05

CD-ROM

TitleVersionSize(KB)Date AddedDownload
VEEK-MT2S CD-ROM1.0.1 2017-06-06

Linux BSP (Board Support Package): MicroSD Card Image

TitleVersionSize(KB)Date AddedDownload
Linux LXDE Desktop (Kernel 4.5)1.2  2017-09-19

Please note that all the source codes are provided "as-is". For further support or modification, please contact Terasic Support and your request will be transferred to Terasic Design Service.
More resources about IP and Dev. Kit are available on Altera User Forums.

 

Other course resources you might be interested:

School: Cornell University Senior Lecturer: Bruce Land
Course 1: - ECE5760 Advanced Microcontroller Design and system-on-chip [DE2] 
Course 2: - ECE 5760 Simplified Floating Point for DSP [DE2] 

The VEEK-MT2S (DE10-Standard + MTLC2) Kit includes the following example designs and Linux BSP. 

Regarding the DE10-Standard only example designs and BSP, please refer to http://de10-standard.terasic.com/cd 

Demonstration List

  • FPGA
    • E_Compass
    • G_Sensor
    • Painter
    • VIP
    • VIP Camera
    • Camera RTL
  • SoC Advanced
    • OpenCV
      • Rough Line
      • Camera IN
      • Face Detection
  • SoC and FPGA
    • Control Panel
    • Light Sensor ADC9300
    • 9-Axis Sensor MPU9250

Linux LXDE Desktop BSP

  • Supports MTLC2 Display and Touch Screen
  • Built-in QT and OpenCV Library
  • GNU Tool Chain for ARM
  • Supports USB Bluetooth, WiFi, and Camera Driver
  • Supports ALSA (Advanced Linux Sound Architecture) Framework

VEEK-MT2S Control Panel Demonstration

VEEK-MT2S Control Panel – allows users to access various components on the VEEK-MT2S from the LXDE Desktop BSP provided by Terasic. The relative project source codes are provided in the System CD.

 

OpenCV Face Detection Demonstration

Utilizing the OpenCV function to perform face detection with the 8 Mega Pixel Camera on MTLC2.

 

VEEK-MT2S G-Sensor Demonstration

This design utilizes an embedded NIOS II CPU to communicate with the on-board digital accelerometer as well as the ambient light sensor. The accelerometer outputs as a level display and the readings for the ambient light are displayed in the upper right-hand corner.

 

VEEK-MT2S Painter Demonstration

This reference design showcases VEEK-MT2S's sensitive capacitive touch-screen capabilities. Supporting multi-paint coordinates and multi-touch gestures, this demonstration allows users to paint with five fingers. Gestures that are drawn on the canvas are displayed in the gesture indicator box left of the color palette.

 

VEEK-MT2S E-Compass Demonstration

This demonstration shows an e-compass on the LCD panel based on information measured by accelerometer and magnetometer in the MPU9250

 

 


▶ Kit Contents

  1. VEEK-MT2S Kit
  2. VEEK-MT2S Quick Start Guide
  3. microSD Adapter
  4. microSD Card (Pre-programmed & Installed)
  5. Card Reader
  6. IR Remote Control 
  7. Type A to Mini-B USB Cable
  8. Type A to B USB Cable
  9. Power DC Adapter (12V)

관련 상품

배송안내

 이니프로에서 판매하는 모든 제품은 이니프로에서 통관 처리후 우체국 택배로 배송됩니다. 

 국내재고가 있는 경우 결제일로부터 3~4 영업일 안에 국내재고가 없는 경우 결제일로부터 3주 안에 배송됩니다.

 현재 국내재고가 있는지 확인하시려면 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시기 바랍니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 교환 및 반품 처리 요청하면 교환 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 교환 및 반품 처리됩니다.

환불안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 환불 요청하면 환불 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 환불수수료(5천원+판매가의1%)을 제외한 나머지 금액을 환불 처리해 드립니다.

AS안내

 제품 보증 기간이 90일인 제품입니다.

 납품후 90일 이내에는 무상 AS, 90일 이후에는 유상 AS 처리됩니다.

이미지 확대보기VEEK-MT2S

VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
  • VEEK-MT2S
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동