Arty (Used) 이미지 확대 보기
  • Arty (Used)
  • Arty (Used)

Arty (Used)

공유
짧은설명
전시용으로 사용한 제품입니다.
정가
169,400
판매가
88,000 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
0원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000618061
제조사
Digilent
상품재고
0개

상품상세정보

Arty is a ready-to-use development platform designed around the Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx. It was designed specifically for use as a MicroBlaze Soft Processing System. When used in this context, Arty becomes the most flexible processing platform you could hope to add to your collection, capable of adapting to whatever your project requires. Unlike other Single Board Computers, Arty isn't bound to a single set of processing peripherals: One moment it's a communication powerhouse chock-full of UARTs, SPIs, IICs, and an Ethernet MAC, and the next it's a meticulous timekeeper with a dozen 32-bit timers. Additionally, with the universally popular expansion headers (Arduino™ R3 Headers and our Pmod™ headers), Arty will become the most adaptable tool in your project toolbox.

Support Materials

Datasheet (PDF) Schematics (PDF)

For all other material:

Resource Center


Features:

  • Xilinx Artix-35T FPGA:
    • 33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops);
    • 1,800 Kbits of fast block RAM;
    • Five clock management tiles, each with a phase-locked loop (PLL);
    • 90 DSP slices;
    • Internal clock speeds exceeding 450MHz;
    • On-chip analog-to-digital converter (XADC).
    • Programmable over JTAG and Quad-SPI Flash
  • System Features:
    • 256MB DDR3L with a 16-bit bus @ 667MHz
    • 16MB Quad-SPI Flash
    • USB-JTAG Programming circuitry
    • Powered from USB or any 7V-15V source
  • System Connectivity:
    • 10/100 Mbps Ethernet
    • USB-UART Bridge
  • Interaction and Sensory Devices
    • 4 Switches
    • 4 Buttons
    • 1 Reset Button
    • 4 LEDs
    • 4 RGB LEDs
  • Expansion Connectors:
    • 4 Pmod connectors
    • Arduino/chipKIT Shield connector
  • Programming
    • Includes a free licence key of Vivado Design Suite.

 

What's
Included:

  • Arty Board Artix-7 FPGA
  • Digilent cardboard packaging with protective foam
  • Vivado Design Suite voucher


Welcome to the resource center for Arty!

Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing Arty, visit the product page on our main website: digilentinc.com/arty.

Documentation

  • SchematicPDF
    • PDF Schematic of the PCB generated by Altium
  • Reference ManualWiki
    • Technical description of the Arty and all of its features. The Wiki page may contain more up-to-date information than the PDF.
  • Sell Sheet – Sell Sheet currently unavailable, please see the reference manual for product detail.

Design Resources

  • Vivado Board FilesWiki
    • Installing the 7 Series Vivado Board Files allows you to create Vivado projects that directly target the Arty hardware
  • Master XDCZIP
    • This file defines the pin constraints for every device on the Arty for Vivado designs.
  • Xilinx Memory Interface Generator (MIG) ProjectZIP
    • This package contains the files needed to properly configure a Xilinx MIG component so that it works with the onboard DDR3L.

Tutorials

  • Getting Started with MicroblazeWiki
    • Follow this introduction on how to get started with Microblaze using Vivado IP Integrator.
  • Getting Started with Microblaze ServersWiki
    • A more advanced Microblaze tutorial, this guide demonstrates how to run an echo server on Arty.
  • Arty Programming GuideWiki
    • This guide walks through the different methods available for programming the FPGA on the Arty

Reference Projects

  • General I/O DemoWiki
    • Basic demo that uses the onboard switches, buttons, leds, and UART
  • XADC DemoWiki
    • Basic demo that shows a simple implementation with the Artix-7 XADC
  • Microblaze Base System DesignWikiFIXME
    • This Vivado IP Integrator project implements a Microblaze system with cores that communicate with all of the peripherals on the Arty
  • Arty Out-of-Box DesignFIXME
    • The source code for the design that ships loaded into Arty's Quad-SPI Flash

Pmod

Digilent는 70여가지의 Pmod 제품을 제공하고 있습니다. FPGA 보드의 Pmod에 커넥터에 Pmod 제품을 연결하면 보드에서 제공하지 않는 70여가지의 다양한 기능을 사용할 수 있습니다. 아래 링크페이지를 통해 다양한 Pmod 제품들을 검토해 보시기 바랍니다.

http://www.inipro.net/goods_list.php?Index=1429

배송안내

 이니프로에서 판매하는 모든 제품은 이니프로에서 통관 처리후 우체국 택배로 배송됩니다. 

 국내재고가 있는 경우 결제일로부터 3~4 영업일 안에 국내재고가 없는 경우 결제일로부터 3주 안에 배송됩니다.

 현재 국내재고가 있는지 확인하시려면 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시기 바랍니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 교환 및 반품 처리 요청하면 교환 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 교환 및 반품 처리됩니다.

환불안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 환불 요청하면 환불 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 환불수수료(5천원+판매가의1%)을 제외한 나머지 금액을 환불 처리해 드립니다.

AS안내

 제조사 정책상 A/S가 되지 않는 제품입니다.

 납품후 30일 이내 초기제품불량인 경우에만 새제품으로 교체해 드립니다.

이미지 확대보기Arty (Used)

Arty (Used)
  • Arty (Used)
  • Arty (Used)
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

TODAY VIEW

0/2
상단으로 이동