Terasic DE10-Pro Stratix 10 GX/SX FPGA Development Kit provides the ideal hardware solution for designs that demand high capacity and bandwidth memory interfacing, ultra-low latency communication, and power efficiency. With a full-height, 3/4-length form-factor package, the DE10-Pro is designed for the most demanding high-end applications, empowered with the top-of-the-line Intel Stratix 10 GX/SX, delivering the best system-level integration and flexibility in the industry.

The Stratix 10 GX/SX FPGA features integrated transceivers that transfer at a maximum of 28 Gbps, allowing the DE10-Pro to be fully compliant with version 3.0 of the PCI Express standard, as well as allowing an ultra low-latency, straight connections to four external 100G/40G QSFP28 modules. Not relying on an external PHY will accelerate mainstream development of network applications enabling customers to deploy designs for a broad range of high-speed connectivity applications. For designs that demand high capacity and high speed for memory and storage, the DE10-Pro provides 4 independent banks of DDR4 SO-DIMM RAM modules and high-speed parallel flash memory. (The sockets can work with Terasic's QDRII or QDR-IV memory modules). The feature-set of the DE10-Pro fully supports all high-intensity applications such as low-latency trading, cloud computing, high-performance computing, data acquisition, network processing, and signal processing. 

Target Markets:

High Frequency Trading		High Performance Computing		Instrumentation		Military & Defence		Broadcast & Video

▶ Specifications

FPGA

• Intel Stratix 10 GX/SX FPGA

FPGA Configuration

• On-Board USB Blaster II or JTAG header for FPGA programming
• Avalon-ST (AVST x8) configuration via MAX II CPLD and CFI flash memory

Memory

• 128MB FLASH
• 4 independent DDR4 SODIMM sockets with ECC, up to 8 GB 1200MHz for each socket. (The sockets can also work with Terasic's QDRII or QDR-IV memory modules.)

Communication and Expansion

• Four QSFP28 connectors
• PCI Express Gen3 x16 edge connector (includes PCIe drivers)
• 2x5 Timing expansion header

Others

• General user input / output:
  • 4 LEDs
  • 2 push-buttons
  • 2 slide switches
  • MMCX clock input / output
• On-Board Clock
  • 50MHz Oscillator
  • Programmable Clock Generator
• System Monitor and Control
  • Temperature sensor
  • Power Monitor
  • Fan control
• Power
  • PCI Express 2x3 and 2x4 power connectors, 12V DC Input
  • PCI Express edge connector power
• Mechanical Specification
  • PCI Express standard height and 3/4-length

 
 

The four DDR4 SODIMM sockets are divided into two groups.  

For better user flexibility, two different memory modules can be inserted separately in right & left groups. For example, users can insert two DDR4 modules on the right side and two QDRII+ SRAM modules on the left side.

Limitation: The two SODIMM sockets must be inserted with the same memory to prevent dysfunction on memory module that requires higher voltage.

• Four QDR-IV Modules

 

• Four QDR-II+ Modules

 

• Four DDR4 SODIMM Modules

• Two DDR4 SODIMM Modules, two QDR-IV Modules

 

• Two DDR4 SODIMM Modules, two QDR-II+ Modules

▶ Layout 

• Size：240*106.65 mm

▶ Resources
 

Documents

Title	Version	Size(KB)	Date Added	Download
DE10-Pro User Manual	1.1	8758	2018-09-04

CD-ROM

More resources about IP and Dev. Kit are available on Altera User Forums.

1. DE10-Pro Development Board
2. 4GB DDR4-2400 ECC SO-DIMM Module x4 (Option)
3. PCIe Bracket (Installed)
4. Air Cooler (Installed)
5. Power Supply (Option) & Power Cable
6. AC Power Cord
7. USB to Micro USB Cable
8. Screw & Copper Pillar Package
9. DE10-Pro Quick Start Guide 

• Quartus design software license is not included in this kit.