The Trenz Electronic Starter Kit TE0808-05-9GI21-AS consists of a TE0808-05-9GI21-A module with ZU9 on a TEBF0808-04A base board including a pre-assembled heatsink, in a black Core V1 Mini-ITX Enclosure. Supplied with a Be Quiet! 400 W power supply for the enclosure, 2 x XMOD FTDI JTAG Adapter, an 8 GB micro SD card, an USB cable, screws and bolts.

The Module: TE0808-05-9GI21-A

The Trenz Electronic TE0808-05-9GI21-A is a MPSoC module with industrial temperature grade integrating a Xilinx Zynq UltraScale+, 4 GByte DDR4 SDRAM, 128 MByte Flash memory for configuration and operation, 20 x high speed serial transceivers, and powerful switch-mode power supplies for all on-board voltages. A large number of configurable I/O's is provided via rugged high-speed stacking connections. 

Key Features

• Xilinx Zynq UltraScale+ XCZU9EG-2FFVC900I
• ZU9EG 900 Pin Packages
• 3 mm mounting holes for skyline heat spreader
• Size: 52 x 76 mm
• B2B Connectors: 4 x 160 pin
• Rugged for shock and high vibration
• 4 GByte 64-Bit DDR4 SDRAM
• 128 MByte SPI Boot Flash (dual parallel)
• User I/Os
  • 65 x PS MIOs, 48 x PL HD GPIOs, 156 x PL HP GIPIOs (3 banks)
  • Serial transceivers: 4 x GTR + 16 x GTH
  • Transceiver clocks inputs and outputs
  • PLL clock generator inputs and outputs
• Si5345 - 10 output PLL
• All power supplies on board, single 3.3 V Power required
  • 14 on-board DC/DC regulators and 13 LDOs
  • LP, FP, PL separately controlled power domains
• Support for all boot modes (except NAND) and scenarios
• Support for any combination of PS connected peripherals
• Evenly spread supply pins for good signal integrity

The Base Board: TEBF0808-04A

The Trenz Electronic TEBF0808 UltraITX+ base board has been developed individually for the TE080x MPSoC series.

All the latest information on the article can be found at http://trenz.org/tebf0808-info.

Key Features

• Mini-ITX form factor, PC enclosure compatible
• ATX-24 power supply connector
• Optional 12 V standard power plug
• Headers
  • Intel 10-pin HDA Audio
  • Intel 9-pin Power-/Reset-Button, Power-/HD-LED
  • PC-BEEPER
• On-board Power- / Reset-Switches
• 2 x Configuration 4-bit DIP-switches
• 2 x Optional 4-wire PWM fan connectors
• PCIe Slot - one PCIe lane (16 lane connector)
• CAN FD Transceiver (10 Pin IDC connector and 6-pin header)
• 4 x On-board configuration EEPROMs (1x Microchip 24LC128-I/ST, 3x  Microchip 24AA025E48T-I/OT)
• Dual SFP+ Connector (2x1 Cage)
• 1 x DisplayPort (single lane)
• 1 x SATA Connector
• 2 x USB 3.0 A Connector (Superspeed Host Port (Highspeed at USB 2.0))
• 1 x USB 3.0 on-board connector with two ports
• FMC HPC Slot (FMC_VADJ max. VCCIO)
• FMC Fan
• Gigabit Ethernet RGMII PHY with RJ45 MagJack
• All carrier board peripherals' I²C interfaces muxed to MPSoC's I²C interface
• Quad programmable PLL clock generator SI5338A
• 2x SMA coaxial connectors for clock signals
• MicroSD- / MMC-Card Socket (bootable)
• 32 Gbit (4 GByte) on-board eMMC flash (8 banks a 4 Gbit)
• 2 x System Controller CPLDs Lattice MachXO2 1200 HC
• 1 x Samtec FireFly (4 GT lanes bidirectional)
• 1 x Samtec FireFly connector for reverse loopback
• 2 pre-assembled TE0790 JTAG/UART header ('XMOD FTDI JTAG Adapter'-compatible) for programming MPSoC and SC CPLDs
• 20-pin ARM JTAG Connector (PS JTAG0)
• 3 x Pmod connector (GPIO's and I²C interface to SC CPLDs and MPSoC module)
• On-board DC-DC PowerSoCs

PC Enclosure Accessible I/O

• PCIe
• FMC
• Dual SFP+
• RJ45 Gigabit Ethernet
• 2x USB3 Host
• Displayport
• microSD
• Two LEDs
• CAN FD (using DB9 to IDC10 Cable)

Core V1 Mini-ITX Enclosure - Technical Features

• Dimensions: 260 x 276 x 316 mm (B x H x T)
• Material: Steel
• Colour: Black
• Drive Slots: 2 x 3.5 inch (intern, 3.5 inch) and 2 x 2.5 inch (intern, 2.5 inch)
• Expansion slots: 2
• I/O-Panel: 2 x USB 3.0 and 1 x Audio In/Out each
• Maximum graphic card lenght: 255 mm (inner enclosure)
• Maximum graphic card lenght: 285 mm (outer enclosure)
• Maximum CPU cooler height: 140 mm
• Maximum lenght power supply: 200 mm

Scope of Delivery - Starter Kit

• 1 x Core V1 Mini-ITX Enclosure- black with viewing window and removable sled walls
• 1 x Power supply Be quiet! BN142 System Power 7, 400 Watt, 12 V, ATX 2.3 with fan
• 1 x TE0808-05-9GI21-A MPSoC module with Xilinx Zynq UltraScale+ ZU9
• 1 x TEBF0808-04A carrier board
• 1 x Heatsink MBH31001-15W/2.6, pre-assembled
• 1 x TE0790-03 XMOD FTDI JTAG adapter (compatible with Xilinx-Tools), pre-assembled
• 1 x TE0790-03L XMOD FTDI JTAG adapter (independent from Xilinx-Tools), pre-assembled
• 1 x 8 GB Class 4 microSDHC card
• 1 x USB cable, Type A to Type B Mini, 2 meter length
• 2 x Phillips screws, M3 x 6, pan head, zinc coated
• 2 x Spacer bolts, M3, 10 mm

Additional Information

• Manufacturer's article number: TE0808-05-9GI21-AS
• Trenz Electronic TE0808 Starter Kit Wiki
• Support Forum