C10GFP 이미지 확대 보기
  • C10GFP

C10GFP

공유
짧은설명
Intel® Cyclone® 10 GX FPGA Development Kit
판매가
견적문의 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
0원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000618320
제조사
Terasic Technologies

상품상세정보

▶ Overview

If you are evaluating Intel® Cyclone® 10 GX FPGAs or already at the design concept stage, Intel has a complete ecosystem to support your design, which includes development kits, software, intellectual property (IP), design examples , Design Solutions Network partners , and Engineer-to-Engineer videos to reduce your time to market.

The Intel Cyclone 10 GX FPGA Development Kit is an ideal starting point for applications, such as embedded vision , factory automation , or video connectivity evaluation or concept proving.

With this development kit, you can:

  • Develop designs for Intel Cyclone 10 GX FPGAs
  • Develop and test PCI Express* (PCIe*) 2.0 designs using the PCI-SIG*- compliant development board
  • Direct connection via USB 3.1 Type C, small form-factor pluggable (SFP+), and RJ-45 connectors
  • Develop modular and scalable designs by using direct connection or via the FPGA mezzanine card (FMC) connector to support protocols, such as USB 3.1 Gen2, GigE Vision,12G serial digital interface (SDI) , DisplayPort , HDMI , JESD204B , Serial Rapid I/O*, Common Public Radio Interface (CPRI), and IEEE 1588

For a complete list of IP cores from both Intel and our partners, use the IP search engine .

For more information on Intel Cyclone 10 GX FPGAs, visit the Intel Cyclone 10 GX FPGA Overview page .

▶ Specification

  • Intel Cyclone 10 GX FPGA
    • P/N: 10CX220YF780E5G with 220K logic elements (LEs)
  • Memory interfaces
    • 1 channel of x40 DDR3 SDRAM at 933 MHz
  • Communication ports
    • 10/100/1000 Base-T Ethernet port with RGMII (LVDS)
    • USB3.1 Type-C, supporting SuperSpeed, backward compatible with USB2.0
    • 2 x SFP+ supporting 10GbE
    • PCIe Gen2 x4
    • FMC expansion card that can be used for:
      • 12G SDI: Semtech RDK-12GSRD-ALTRA00 evaluation card
      • 8G DisplayPort: Bitec FMC DisplayPort daughtercard
      • 6G HDMI 2.0: Bitec FMC HDMI daughtercard
  • Clock sources
    • 50 MHz oscillator, LVCMOS for FPGA core
    • Programmable clock generator for FPGA core and transceiver (XCVR)
    • 100 MHz for PCIe, from PCIe system to FPGA XCVR
    • User-defined reference clock input from a FMC card
    • External differential input through SMA, AC coupled
    • Single-ended LVCMOS clock output through SMA, DC coupled
  • LED
    • 1 x power LED
    • 1 x config_done LED
    • Parallel flash loader (PFL) load/error LED
    • PFL program number LED
    • Ethernet LEDs
    • SFP+ LEDs
  • Push button
    • 3 x user push buttons
    • 1 x user program selection
    • 1 x push button to initiate FPGA configuration
    • 1 x push button to reset the FPGA logic
  • Switches
    • User dual inline package (DIP) switches x4
    • DIP switch for FPGA configuration scheme selection
    • DIP switch for default image selection
    • DIP switch for JTAG chain selection
    • DIP switch for clock source selection
  • FPGA Configuration
    • Active Serial (AS) x4 mode configuration with EPCQ-L
    • Fast passive parallel (FPP) configuration mode
    • Configuration via Protocol (CvP) with PCIe Gen2 x4
  • Power
    • Intel Enpirion® point-of-load synchronous buck regulators with integrated inductors
    • On-board power measurement and management
    • Power-failure monitor
    • 12V power input from PCIe system or external power adaptor input


▶ Resources

Design Examples
Multiple design examples and reference designs will be available for the Intel Cyclone 10 GX FPGA Development Kit in the Intel FPGA Design Store. For a list of all Intel Cyclone 10 GX FPGA designs, visit the Intel FPGA Design Store .

Documents

TitleVersionSize(KB)Date AddedDownload
User Guide 2018-01-05
Schematic 2018-01-05
Kit Collateral (zip) 2018-01-05

배송안내

 이니프로에서 판매하는 모든 제품은 이니프로에서 통관 처리후 우체국 택배로 배송됩니다. 

 국내재고가 있는 경우 결제일로부터 3~4 영업일 안에 국내재고가 없는 경우 결제일로부터 3주 안에 배송됩니다.

 현재 국내재고가 있는지 확인하시려면 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시기 바랍니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 교환 및 반품 처리 요청하면 교환 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 교환 및 반품 처리됩니다.

환불안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 환불 요청하면 환불 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 환불수수료(5천원+판매가의1%)을 제외한 나머지 금액을 환불 처리해 드립니다.

AS안내

 제품 보증 기간이 90일인 제품입니다.

 납품후 90일 이내에는 무상 AS, 90일 이후에는 유상 AS 처리됩니다.

이미지 확대보기C10GFP

C10GFP
  • C10GFP
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

TODAY VIEW

0/2
상단으로 이동