The MYD-CZU3EG development board consists of the MYC-CZU3EG CPU Module and a specially designed base board to provide a complete and versatile platform for evaluating and prototyping based on Xilinx Zynq UltraScale+ MPSoC devices. MYIR also supply the development board and CPU Module with ZU4EV and ZU5EV variants.

 

The MYC-CZU3EG/4EV/5EV CPU Module is an Arm SOM with integrated XCZU3EG-1SFVC784 / XCZU4EV-1SFVC784 / XCZU5EV-2SFVC784 MPSoC, 4GB DDR4, 4GB eMMC, 128MB QSPI Flash, Ethernet PHY, USB PHY and Intel Power Module. It is mounted on the MYD-CZU3EG/4EV/5EV base board through two 0.5mm pitch 160-pin Razor Beam High-Speed Sockets.

 

The MYD-CZU3EG/4EV/5EV Zynq UltraScale+ MPSoC development board has extended a rich peripheral set and interfaces on the base board through connectors and headers including USB 3.0, Gigabit Ethernet, CAN, TF, DisplayPort (DP), PCIe interface, SATA interface, JTAG, HDMI, LCD interface, ARDUINO User Interface, PMoD, FMC, and four SFP+ interfaces (for EV MPSoCs only).

 

The MYD-CZU3EG/4EV/5EV is capable of running PetaLinux and comes with necessary cable accessories as well as detailed documentations and software package. It can support Xilinx Vitis Software development platform. Typical applications are the Internet, cloud computing, Data center, Machine Vision, Military facilities, Flight navigation and other embedded applications.
 

 

MYD-CZU3EG/4EV/5EV Development Board
(delivered with installed active heatsink on MYC-CZU3EG/4EV/5EV CPU Module by default)

 

 

MYC-CZU3EG/4EV/5EV CPU Module 

Features

Mechanical Parameters

• Dimensions: 60.00mm x 52.00mm (CPU Module), 195.33mm x 123.95mm (base board)
• PCB Layers: 12-layer design (CPU Module), 6-layer design (base board)
• Power supply: 3.3V (CPU Module), 12V (base board)
• Working temp.: 0~70 Celsius (commercial grade)

The MYD-CZU3EG/4EV/5EV Controller Board (MYC-CZU3EG/4EV/5EV CPU Module)

MPSoC

• Xilinx Zynq UltraScale+ XCZU3EG-1SFVC784 / XCZU4EV-1SFVC784 / XCZU5EV-2SFVC784 MPSoC
  - 1.2GHz 64 bit Quad-core ARM® Cortex™-A53
  - 600MHz Dual-core ARM® Cortex™-R5 processor
  - ARM Mali™-400MP2 Graphics Processor
  - 16nm FinFET+ FPGA fabric

Memory

• 4GB DDR4 SDRAM (64bit, 2400MHz)
• 4GB eMMC Flash
• 128MB QSPI Flash

Peripherals and Signals Routed to Pins ( MYC-CZU3EG/4EV/5EV Pinouts Description)

• Gigabit Ethernet PHY
• USB PHY
• Intel Power Module
  
• Clock Generator
  
• Watchdog
• Four LEDs
  - One yellow LED for ERROR_STATUS indicator (indicate a secure lockdown state)
  - One yellow LED for ERROR_OUT indicator (Asserted for accidental power loss, hardware error)
  - One green LED for PS_Done indicator (indicate the pl configuration is done)
  - One green LED for PS_INIT indicator (indicate the ps is initialized after a power-on reset)
• Two Samtec 0.5mm pitch 160-pin Razor Beam High-Speed socket bring out
  - 4 PS GTR transceivers along with 2 GTR reference clock inputs
  - PS JTAG interface, USB 2.0 interface, Gigabit Ethernet interface and etc.
  - 4 PL GTH transceivers along with 1 GTH reference clock inputs (only for Zynq UltraScale+ EV Devices)
  - 156 user PL I/O pins

The MYD-CZU3EG/4EV/5EV Base Board (MYB-CZU3EG/4EV/5EV)

PS Unit

• One USB 3.0 (Type-C interface)
• One USB to UART port
• One TF card slot
• One CAN interface
• One 10/100/1000Mbps Ethernet interface
• One PCIe interface
• One SATA interface
• One 2.54mm pitch 14-pin JTAG interface (PS, PL reused)
  
• Buttons (one user button, one system reset button and one ps-programming button)
• One DisplayPort (DP)
• Battery backed RTC

PL Unit

• One Xilinx standard LPFMC interface
• One HDMI interface (signals reused with LCD/TSP interface)
• Four SFP+ transceiver interfaces (up to 10Gpbs, only for Zynq UltraScale+ EV Devices)
• Two-channel Pmod
• ARDUINO user interface
• LCD/TSP interface (24-bit RGB, supports resistive and capacitive touch screen panels)
• LEDs
- One blue LED for power indicator
- One red LED for FPGA programming indicator
- One green LED for user defined

 

OS Support

• PetaLinux 2020.1

Other MYIR's Xilinx Products

http://www.myirtech.com/xilinxseries.asp

Z-turn Board Single Board Computer (based on Zynq-7010 / 7020)

Z-turn Lite Single Board Computer (based on Zynq-7007S / Zynq-7010)

MYD-C7Z015 Development Board (MYC-C7Z015 CPU Module as core board)

MYD-Y7Z010/20 Development Board (MYC-Y7Z010/20 CPU Module as core board)

MYD-C7Z010/20 Development Board (MYC-C7Z010/20 CPU Module as core board)

FZ3 Card - deep learning accelerator card (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)

FZ5 Card (AI Accelerator Card based on Zynq UltraScale+ ZU5EV MPSoC) 

VECP Starter Kit - a complete Vision Edge Computing Platform (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)