MY-CAM003M

HOME >

MYIR

Add-on Options

MY-CAM003M

짧은설명: MY-CAM003M MIPI Camera Module

판매가: 38,500원 <관세ㆍ부가세 포함>

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비: 44,000원

택배

방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호

상품코드: 1000618571

제조사: MYIR Tech

MY-CAM003M

0원

총 상품금액

총 할인금액

총 합계금액

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

The MY-CAM003M MIPI Camera Module is released by MYIR especially for working on MYIR's i.MX 8M Quad processor based MYD-JX8MX development board. It is connected with the board through a MIPI-CSI interface (24-pin FPC connector) and supports resolution up to 2592 by 1944 pixels. It is using OV5640 image sensor which is a 5 MegaPixel CMOS camera. The module is measuring only 59mm by 33mm with small form factor, low power consumption, high performance which can be used in various products.

MY-CAM003M(1)_133704.jpg MY-CAM003Mb(1)_133704.jpg

MY-CAM003M MIPI Camera Module (top-view and bottom-view)

Dual MY-CAM003M Camera Modules working on MYD-JX8MX Development Board

Features

Item		Paramenters
Active Array Size		2592 x 1944
Power Supply	Core	1.5VDC ± 5% (with embedded 1.5V regulator)
	Analog	2.6 ~ 3.0VDC
	I/O	1.8V to 2.8V
Power Requirements	Active	140 mA
	Standby	20 μA
Temperature Range	Operation	-30℃ to 70℃ junction temperature
	Stable Image	0℃ to 50℃ junction temperature
Output Formats		8-/10-bit RGB RAW data
Lens size		1/4″
Lens chief ray angle		24°
Input clock frequency		6~27 MHz
Max S/N Ratio		36 dB (maximum)
Dynamic Range		68 dB @ 8x gain
Maximum Image Transfer Rate	QSXGA (2592x1944)	15 fps
	1080P	30 FPS
	1280x960	45 fps
	720p	60 fps
	VGA (640x480)	90 fps
	QVGA (320x240)	120 fps
Sensitivity		600 mV/Lux-sec
Shutter		Solling shutter / frame exposure
Maximum Exposure Interval		1964 x t_ROW
Pixel Size		1.4 μm x 1.4 μm
Dark Current		8 mV/s at 60℃ junction temperature
Image Area		3673.6μm x 2738.4μm
Package Dimensions		5985μm x 5835μm

Signals Routed to MIPI-CSI Camera interface (24-pin FPC connector)

Pin	Signal	Description
1	AGND	Ground
2	AVDD	Power 2V8
3	AF-GND	Ground
4	AF-VDD	Power 2V8
5	STROBE	NC
6	DVDD	Power 1V5
7	DGND	Ground
8	SCL	SCCB data
9	SDA	SCCB input clock
10	RES	Reset（active low with internal pull up register）
11	DGND	Ground
12	XCLK	System input clock
13	DGND	Ground
14	MDP1	MIPI TX second data lane positive output
15	MDN1	MIPI TX second data lane negative output
16	DGND	Ground
17	MCP	MIPI TX clock data lane positive output
18	MCN	MIPI TX clock data lane negative output
19	DGND	Ground
20	MDPO	MIPI TX first data lane positive output
21	MDN0	MIPI TX first data lane negative output
22	DGND	Ground
23	PWDN	Power down（active hige with internal pull down register）
24	DOVDD	Power 1V8