The Measurement Computing MCC 128 is a voltage HAT (Hardware Attached on Top) board designed
for use with Raspberry Pi®. It provides eight single-ended (SE) or four differential (DIFF) analog inputs with the following
input ranges (+/-10 V, +/-5 V, +/-2 V, +/-1 V). A bidirectional clock I/O pin lets users pace operations with an external clock
signal or with the board’s internal scan clock. Use software to set the direction. The external digital trigger input is
software-configurable for rising or falling edge, or high or low level. The MCC 128 is powered with 3.3 V provided by
the Raspberry Pi through the GPIO header connector.
HAT configuration parameters are stored in an on-board EEPROM that allows the Raspberry Pi to automatically set up the
GPIO pins when the HAT is connected. The open-source MCC DAQ HAT Library of commands in C/C++ and Python allows
users to develop applications on the Raspberry Pi using Linux. The MCC DAQ HAT Library supports operation with
multiple MCC DAQ HATs running concurrently. Console-based and user interface (UI) example programs are available for each
API.
·
Installing and Using the
Library
· Open-source Library for C/C++ and Python
● 이니프로에서 판매하는 모든 제품은 이니프로에서 통관 처리후 우체국 택배로 배송됩니다.
● 국내재고가 있는 경우 결제일로부터 3~4 영업일 안에 국내재고가 없는 경우 결제일로부터 3주 안에 배송됩니다.
● 현재 국내재고가 있는지 확인하시려면 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시기 바랍니다.
● 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.
● 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 교환 및 반품 처리 요청하면 교환 가능합니다.
● 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.
● 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 교환 및 반품 처리됩니다.
● 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 환불 요청하면 환불 가능합니다.
● 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.
● 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 환불수수료(5천원+판매가의1%)을 제외한 나머지 금액을 환불 처리해 드립니다.
● 제조사 정책상 A/S가 되지 않는 제품입니다.
● 납품후 30일 이내 초기제품불량인 경우에만 새제품으로 교체해 드립니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?