▶ Product Subtitle

16-bit multifunction DAQ devices for general purpose data acquisition applications.

▶ Product Description

The Measurement Computing USB-231 and USB-234 are USB-based, 16-bit, multifunction DAQ devices. They feature 8 SE/4 DIFF analog inputs, with a fixed analog input range of ±10 V, 16-bit resolution, two 16-bit analog outputs, eight digital I/O, and one 32-bit counter. The USB-231 features a 50 kS/s sample rate. The USB-234 features a 100 kS/s sample rate. These devices are USB-powered and require no external power.

Each device provides two 16-bit analog outputs. One or both outputs can be updated at a rate up to 5 kS/s per channel. The output range is fixed at ±10 V.

Eight TTL-level digital I/O lines are included with USB-230 Series devices. Each channel is software-selectable for input or output. Digital input voltage ranges from 0 V to 5 V are supported, with thresholds of 0.8 V (low) and 2.3 V (high). When used in output mode, each digital channel allows for 3.3 V operation with a source/sink current limit of ±4 mA. All DIO lines are set to high-impedance inputs at system startup and reset. The device does not drive the signal high or low. Each line has a weak pull-down resistor connected to it. All digital I/O updates and samples are software-paced.

USB-230 Series devices include an external digital trigger input that is software selectable for rising edge or falling edge detection.

USB-230 Series devices support one 32-bit edge counter (rising) that accepts inputs up to 5 MHz.

Software support includes DAQami, an out-of-the-box application for data logging, visualization, and signal generation. Data can be viewed in real-time or post-acquisition on user-configurable displays. Drivers are included for the most popular applications and programming languages including Visual C++®, Visual C#®, Visual Basic®.NET, DASYLab®, LabVIEW™, MATLAB®, and Python™.

▶ Features

• 8 SE/4 DIFF analog inputs
• 16-bit resolution
• USB-234: 100 kS/s sample rate
  
• ±10 V input range
• Two 16-bit analog outputs
• Eight digital I/O
• One counter input
• No external power required. USB cable is included

▶ Support Materials

• Datasheet

▶ Demo / Project Links

·         MCC Software Overview

·         MCC Software Downloads

·         MCC example programs

·         USB-234 Manual 

▶ What's Included

• USB-234
• USB cable (micro-USB type B)
• Two screw terminal connector plugs
• Printed insert: DAQami Quick Start
• MCC packaging assembly/foam, etc.