MCC USB-1808X 이미지 확대 보기
  • MCC USB-1808X
  • MCC USB-1808X
  • MCC USB-1808X

MCC USB-1808X

공유
짧은설명
High-Speed, High-Precision, Simultaneous USB DAQ Device / 6069-410-014
판매가
1,496,000 <관세ㆍ부가세 포함>
구매제한
옵션당 최소 1개
구매혜택
할인 : 적립 마일리지 :
배송비
0원 / 주문시결제(선결제) 조건별배송
택배
방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호
상품코드
1000618612
제조사
Digilent
MCC USB-1808X
0
총 상품금액
총 할인금액
총 합계금액

상품상세정보

▶ Product Subtitle

18-bit multifunction DAQ device for high-speed data acquisition applications

▶ Product Description

The Measurement Computing USB-1808X is a USB-based DAQ device with eight high-precision, simultaneous analog inputs, 18-bit resolution, 200 kS/s/ch sample rate, two analog outputs, 4 digital I/O, two counters, and two quadrature encoder inputs. This device is USB powered and requires no external power.

The USB-1808X offers voltage inputs ranges of ±10 V, ±5 V, 0 V to 10 V, and 0 V to 5 V. This device incudes two 16-bit analog outputs. The DACs can be updated at a rate of 500 kS/s per channel. The output range is fixed at ±10 V.

Four digital I/O lines are individually configurable for input or output. The DIO terminals can detect the state of any TTL-level input. Users can configure for pull-up (+5 V) or pull-down (0 V) with an onboard jumper.

The USB-1808X has two 32-bit general-purpose counter inputs that can be read asynchronously under program control, or synchronously as part of a digital scan group. Each counter can accept frequency inputs up to 50 MHz and supports the following software-selectable counter input modes; totalize, period measurement, and pulse-width measurement. The USB-1808X can simultaneously decode signals from up to two quadrature encoders. Encoders with a 50 MHz maximum pulse frequency and X1, X2, and X4 count modes are supported. Each device provides A, B, and Z inputs for each connected encoder. A typical encoder generates the A and B signals at a 90° phase shift with respect to each other. These signals are used to determine system position (counts), velocity (counts per second), and direction of travel or rotation.

Two timers can generate pulse rates of up to 50 MHz each, with programmable pulse widths down to 10 ns. Timer output operations can be paced by the internal clock or by an external clock and can be initiated by a digital trigger.

The USB-1808X can read analog, digital, counter, and encoder inputs, and generate up to two analog outputs and one digital pattern output at the same time. Digital, counter, and encoder inputs do not affect the overall A/D rate because these inputs use no time slot in the scanning sequencer. For example, one analog input channel can be scanned at the maximum A/D rate along with digital, counter, and encoder input channels. Each analog channel can have a different gain, and digital, counter, and encoder channels do not need additional scanning bandwidth as long as there is at least one analog channel in the scan group. Digital input channel sampling is done during the dead time of the scan period when no analog sampling is being done.

The device provides two external clock inputs – one for pacing input scan and the other to pace output scans. Also included are two clock outputs – one to output the internal or external clock used for input scans, and the other to output the internal or external clock used for output scans.

The USB-1808X supports digital triggering and pattern triggering. The trigger mode is software-selectable for edge or level sensitive, rising or falling edge, high or low level.

Software support includes DAQami, an out-of-the-box application for data logging, visualization, and signal generation. Data can be viewed in real-time or post-acquisition on user-configurable displays. Drivers are included for the most popular applications and programming languages including Visual C++®, Visual C#®, Visual Basic®.NET, DASYLab®, LabVIEW™, MATLAB®, and Python™.

 

▶ Features

  • 8 SE/8 DIFF simultaneous analog inputs
  • 18-bit resolution
  • 200 kS/s/ch sample rate
  • ±10 V, ±5 V, 0-10 V, 0-5 V input ranges
  • Two 16-bit analog outputs
  • Four digital I/O
  • Two counter inputs
  • Two quadrature encoder inputs
  • Two timer outputs
  • No external power required. USB cable is included

▶ Support Materials

▶ Demo / Project Links

·         MCC Software Overview

·         MCC Software Downloads

·         MCC example programs

·         USB-1808X Manual

▶ What's Included

  • USB-1808X
  • USB cable
  • Printed insert: DAQami Quick Start
  • MCC packaging assembly/foam, etc

관련 상품

배송안내

 이니프로에서 판매하는 모든 제품은 이니프로에서 통관 처리후 우체국 택배로 배송됩니다. 

 국내재고가 있는 경우 결제일로부터 3~4 영업일 안에 국내재고가 없는 경우 결제일로부터 3주 안에 배송됩니다.

 현재 국내재고가 있는지 확인하시려면 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시기 바랍니다.

 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.

교환 및 반품안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 교환 및 반품 처리 요청하면 교환 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 교환 및 반품 처리됩니다.

환불안내

 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 환불 요청하면 환불 가능합니다.

 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.

 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 환불수수료(5천원+판매가의1%)을 제외한 나머지 금액을 환불 처리해 드립니다.

AS안내

 제조사 정책상 A/S가 되지 않는 제품입니다.

 납품후 30일 이내 초기제품불량인 경우에만 새제품으로 교체해 드립니다.

이미지 확대보기MCC USB-1808X

MCC USB-1808X
  • MCC USB-1808X
  • MCC USB-1808X
  • MCC USB-1808X
닫기

비밀번호 인증

글 작성시 설정한 비밀번호를 입력해 주세요.

닫기

장바구니 담기

상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?

찜 리스트 담기

상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?

상단으로 이동