Digilent's Discovery USB Programmable Power Supply (DPS3340) is a three channel variable DC programmable power supply that allows users to control the power provided to their external circuits. Providing both constant voltage and constant current modes with built in readback sensors and optional tracking for the output channels, you can confidently power your circuits according to your requirements.
Driven by the free WaveForms software (Mac, Linux, and Windows compatible), the Discovery USB Programmable Power Supply can be used either as a stand-alone product or in combination with any of Digilent's Test and Measurement devices acting as its own Tool within the WaveForms software — no external triggers or multiple instances of software required.
The Discovery USB Programmable Power Supply has 3 programmable Digital Voltage Supplies, which can supply between 1 V to +5 V at up to 3 A, -1 V to -15 V at up to -500 mA, and 1 V to +15 V at up to 500 mA through the Power Supplies (“Supplies”) instrument.
The DPS3340 can either be used as a standalone device within the WaveForms software, or can be used co-currently with any Digilent Test and Measurement device as an additional Power Supply tool within a single WaveForms instance by clicking the Select+ button after first choosing the primary T&M device.
Each of the power supply rails is associated with an LED available on the connector, just above the supply's banana connector, which is used to indicate the operating mode of that supply. When a load doesn't require more current than the supply's current limit, the supply operates in Constant Voltage (CV) mode, and the indicator LED is green. When the load does try to draw more current than the current limit, the supply operates in Constant Current (CC) mode, and the LED is red. WaveForms' Supplies instrument UI for the DPS3340 also features these LEDs, showing CV mode with a green indicator and CC with a red indicator.
All channels have integrated readback for voltage and current. Additionally, output channels 2 and 3 share a common ground connection as well as providing optional tracking of both voltage output and current limits through the WaveForms software.
·
Using Power Supplies with a Readback Plot
·
Using Power Supplies with a Readback Plot
·
Using a Discovery Power Supply with other Digilent
Equipment
·
Calibrating a Digilent Test and Measurement Device
·
Saving and Sharing WaveForms Workspaces
·
Estimating Power Consumption with the Discovery Power
Supply (DPS3340)
·
Getting Started with LabVIEW and a Test and Measurement
Device
● 이니프로에서 판매하는 모든 제품은 이니프로에서 통관 처리후 우체국 택배로 배송됩니다.
● 국내재고가 있는 경우 결제일로부터 3~4 영업일 안에 국내재고가 없는 경우 결제일로부터 3주 안에 배송됩니다.
● 현재 국내재고가 있는지 확인하시려면 1:1 문의 게시판에 남겨주시거나 sales@inipro.net 으로 메일을 보내주시기 바랍니다.
● 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.
● 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 교환 및 반품 처리 요청하면 교환 가능합니다.
● 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.
● 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 교환 및 반품 처리됩니다.
● 제품 수령후 7일이내에 이니프로 고객센터에 연락하여 환불 요청하면 환불 가능합니다.
● 제품은 박스 상단에 아이디 또는 성함 등을 표기한 후 쇼핑몰 하단의 주소 및 연락처로 택배 발송해 주시기 바랍니다.
● 제품 및 제품포장 박스 등에 손상된 부분이 없는지 고객센터에서 확인한 후 환불수수료(5천원+판매가의1%)을 제외한 나머지 금액을 환불 처리해 드립니다.
● 제조사 정책상 A/S가 되지 않는 제품입니다.
● 납품후 30일 이내 초기제품불량인 경우에만 새제품으로 교체해 드립니다.
상품이 장바구니에 담겼습니다.
바로 확인하시겠습니까?
상품이 찜 리스트에 담겼습니다.
바로 확인하시겠습니까?