▶ Academic Product

▶ Product Subtitle

Brings power and versatility to your PC/104 stackable PC

▶ Product Description

USB104 A7 brings power and versatility to your PC/104 stackable PC. The board measures 95.89 mm x 90.17 mm and provides the standard mounting holes with standoffs included. The USB104 A7 features the industrial temperature rated Xilinx Artix-7 XC7A100T. Artix®-7 devices provide the highest performance-per-watt fabric making the USB104 A7 ideal for size, weight, and power (SWaP) constrained projects. I/O is provided with on-board LEDs and push-buttons, and, of course, three 12-pin Pmod ports. A SYZYGY-compatible Zmod port is available as well, allowing for high-speed signal acquisition and generation. An onboard USB hub and controller conveniently interfaces the USB104 A7 with JTAG, UART, and a parallel data interface (DPTI) through a single connection. The DPTI data transfer interface provides host-to-FPGA data transfer and is easily managed with Digilent’s Adept 2 application. This ease of use and high-speed data transfer is especially useful for deployed systems.

▶ Support Materials

• Datasheet
• Schematics(PDF)
• Resource Center

▶ Demo / Project Links

• Memory Interface Generator File Archive
• USB104A7 ZmodADC Demo
• USB104A7 ZmodDAC Demo
• USB104 A7 Out-of-Box Demo (GitHub)

▶ Features

• Xilinx Industrial Temperature Rated Artix-7 FPGA (XC7A100T-1CSG324I)
• 512 MB Micron DDR3 with 16-bit bus @ 800 or 667 MT/s depending on configurable voltage
• 16 MB Spansion Quad-SPI Flash
• USB-JTAG Programming circuitry
• USB-UART bridge
• Adept DPTI/DSPI data transfer interface for high speed host to FPGA data transfer
• Onboard USB hub eliminates the need for multiple USB cable connections
• One standard SYZYGY port (Zmod)
• Three standard Pmod ports
• PCB adheres to PC/104 form factor and includes the standard mounting holes
• Powered from a 5V external DC adapter attached to barrel jack or from USB header
• Automatic switching between USB and external power, with external receiving preference
• NCP380 load switch limits USB current to 2 amps and reduces in-rush current

▶ Target Applications

• Military & Defense
• Industrial Automation
• Transportation/Automotive
• Embedded OEM
• Telecommunications

▶ What's Included:

• Choose between the following options:
• USB104 A7-100T, board only
• USB104 A7-100T board, bundled with the Zmod Scope 1410-105
• USB104 A7-100T board, bundled with the Zmod AWG 1411
• 1.5m USB 2.0 A to B shielded cable
• 30W, 5V, 6A power supply with US and EU adapters