ZEM4310

HOME >

Opal Kelly

ZEM4310

짧은설명: USB 3.0 integration module based on the Altera Cyclone IV FPGA

판매가: 1,032,900원 <관세ㆍ부가세 포함>

구매제한: 옵션당 최소 1개

구매혜택: 할인 : 적립 마일리지 :

배송비: 88,000원

택배

방문 수령지 : 경기도 성남시 중원구 사기막골로 99 성남센트럴비즈타워2차 B동 913호

상품코드: 1000616173

제조사: Opal Kelly

ZEM4310

0원

총 상품금액

총 할인금액

총 합계금액

상품상세정보
배송안내
교환 및 반품안내
상품후기 (0)
상품문의 (0)

상품상세정보

The ZEM4310 is a USB 3.0 integration module based on the Altera Cyclone IV FPGA. In addition to a high gate-count FPGA, the ZEM4310 utilizes the high transfer rate of USB 3.0 for configuration downloads, enabling speedy FPGA configuration and data transfer. With integrated SDRAM, power supplies, bootable Flash, and dual HSMC+ok (HSMC with some additional capabilities) interfaces, the ZEM4310 is a great choice for integration or evaluation.

USB 3.0 SuperSpeed Performance

Real-world measured performance at over 300 MiB/s is possible with the FrontPanel API and SuperSpeed USB 3.0 connections.

On-Board SDRAM

Built with an integrated 128-MiB DDR2 SDRAM, the ZEM4310 has abundant on-board memory for high-performance applications, including data and image acquisition as well as signal processing.

FrontPanel

Opal Kelly’s FrontPanel SDK is an easy-to-use, robust API for communication, configuration, and interfacing to your PC. FrontPanel handles all the interaction between your software and the FPGA internals, dramatically reducing the time and effort required to interface to a design.

Prototyping and OEM Integration

The ZEM4310 is ideally suited to prototyping systems and integration into OEM devices where a USB interface, flexible hardware solution, or PC software interface would be useful. The ZEM4310 can easily be added to a new board design to provide turnkey USB integration with the convenience of the FrontPanel programmer’s interface and existing USB drivers.

Applications

Image or video capture / processing
Data acquisition
ASIC / hardware-based simulation and verification
Digital communications

Evaluation platform for HSMC peripherals
Custom test equipment
Cryptography
Data Security

Block Diagram

ZEM4310-BlockDiagram

USB 3.0 SuperSpeed Performance

Measured performance at over 300 MiB/s for real-world data transfers to/from the PC.

Bootable Serial Flash (2x 16MB)

The ZEM4310 integrates 16 MiB of on-board serial Flash for standalone FPGA booting and miscellaneous nonvolatile memory and a separate 16 MiB serial Flash for exclusive FPGA use.

128 MiB DDR2

Integrated 128-MiByte DDR2 provides plenty of on-board memory for high-performance applications, including image capture and data acquisition.

Switching Power Supplies

High-efficiency switching power supplies provide stable, dependable power to the FPGA. In most applications, there is enough extra juice to also supply your board.

Features & Specifications

Altera Cyclone IV FPGA (EP4CE55F23C8N)
2x 16-MiB serial flash (Numonyx N25Q128A)
128-MiByte DDR2 (Micron MT47H64M16HR)
Small form-factor -- 80mm x 60mm x 15.98mm (3.15" x 2.36" x 0.63")
High-speed USB 3.0 interface (Cypress FX3) for configuration and data transfer
Measured performance at over 315 MiB/s
Self-powered by external DC source
50 MHz clock oscillator
Two LEDs
Two 180-pin 0.5mm Samtec HSMC connectors (QSH-090)
Over 160 user I/O and CLK pins on expansion connectors
Independent access to VCCO bank voltages
JTAG pins available on the expansion connectors
Full FrontPanel virtual control panel support
Complete Application Programmer's Interface (API) in C, C++, C#, Ruby, Python, and Java

Note: Firmware source code is not included. Full documentation on designing the ZEM4310 into your application is contained in the ZEM4310 User's Manual and FrontPanel User's Manual. Please see the Library items on this page.