Product information "Carrier Board with unsoldered headers for TE0300/TE0630"

The Trenz Electronic TE0303 prototyping carrier board provides low-cost connection and extension to the Trenz Electronic TE0300 and TE0630 industrial micromodules.

The democarrier board has a total of 42 differential signal pairs routed with a differential impedance of 100 ohm to header connectors J1 to J4. These lines can be used for high speed signaling up to 666 Mbit/s per differential pair (see Xilinx Application Note XAPP485).
The demo carrier board has a total of 26 single ended lines routed to header connectors J1 to J4. These lines can be used for low-speed and medium-speed signals.

Specifications

• 42 differential pairs (for high-speed signals) available on header connectors with 2.54 mm (100 mil) pitch
• 26 single-ended lines (for low- / medium-speed signals) available on header connectors with 2.54 mm (100 mil) pitch
• Board supply via DC jack, screw terminals or USB connector
• Small form factor: 115 mm x 70 mm
• 2.1 mm jack

Scope of Delivery

• 1 x TE0303-01NC Trenz Electronic Prototyping Carrier Board
• Headers are not soldered on the board, but are included

Available for download

• User Manual
• Schematics
• Assembly Diagram

Additional Information

• Manufacturer's article number: TE0303-01NC
• Support Forum

All modules produced by Trenz Electronic are developed and manufactured in Germany.

Related links to "Carrier Board with unsoldered headers for TE0300/TE0630"

•  Do you have any questions concerning this product?
•  Wiki
•  Further products by Trenz Electronic GmbH