Description

The MYC-JA5D2X CPU Module is a core controller board powered by Atmel SAMA5D2 which is a high-performance, ultra-low-power ARM Cortex-A5 processor based MPU and runs up to 500MHz, supporting multiple memories, including the latest generation such as DDR3, LPDDR3, and QSPI Flash. It is an embedded processing card with integrated 256MB DDR3 SDRAM, 256MB Nand Flash, 4MB Data Flash, 64KB EEPROM and Ethernet PHY and can be easily embedded into your next design. With the SO-DIMM I/O expansion connector, a number of I/O signals are available to enable your base board extension and implement more functions and flexible configurations based on customer demand.

The Atmel SAMA5D26 and SAMA5D27 processors are compatible to be used on the MYC-JA5D2X CPU Module. MYIR delivers the module with 5D27 device by default. The module is capable of running Linux 4.1 and can work in industrial temperature ranging from -40 to +85 Celsius.

MYC-JA5D2X CPU Module

MYIR offers a development board MYD-JA5D2X built around the MYC-JA5D2X CPU Module and has extended various peripherals through headers and connectors on the base board including serial ports, USB Host and Device ports, one CAN port (only for SAMA5D27), one 10/100Mbps Ethernet port, RS485, TF card slot, Audio in/out, LCD, etc. It is a good reference design for development based on Atmel SAMA5D2 MPUs.

MYD-JA5D2X Development Board

MYIR also provides custom design services, we can help with your base board design based on the MYC-JA5D2X CPU module rapidly; we can also modify on existing hardware, whether reducing, adding or removing functions according to your requirements.

Features

• Dimensions: 45mm x 67.6 mm
• PCB layers: 8-layer design
• Power supply: 3.3V/0.5A
• Working Temp.: -40~85 Celsius (industrial level)
  
• Processor: Atmel SAMA5D26, SAMA5D27
  - ARM® Cortex™-A5 processor, operates at up to 500MHz (785DMIPS)
  - 128KB of L2 cache for system performance.
  - Floating point unit (FPU) for high-precision computing and accelerated data processing.
  - 10/100 MAC with IEEE1588
  - Two HS High Speed USB ports (configurable as two hosts or one host and one device port) 
  - One High Speed Inter-Chip Interface (HSIC) port
  - One 12-bit image sensor controller with Raw Bayer support
  - Graphic LCD controller with overlays for image composition
  - Advanced security features to prevent counterfeiting, secure external communication, and authenticate the system
  - Market-leading low power consumption
  
• 256MB DDR3 SDRAM
• 256MB Nand Flash
• 4MB Data Flash
• 64KB EEPROM
• On-board Ethernet PHY
• One Power indicator (Red)
• One user LED (Blue)
• SO-DIMM 200-pin connector brings out below peripheral signals:
   MYC-JA5D2X Pinouts Description
  - 1 x Ethernet 
  - 3 x USB (1 x Host, 1 x Device, 1 x HSIC, HSIC is only for SAMA5D27)
  - Up to 10 x Serial ports
  - Up to 7 x I2C
  - Up to 2 x CAN (only for SAMA5D27)
  - Up to 7 x SPI
  - Up to 2 x QSPI
  - 12 x 12-bit ADC (enhanced resolution up to 14 bits)
  - 4 x PWM
  - 1 x 4-bit SDIO
  - 1 x 24-bit LCD
  - Up to 2 x SSC, compatible with I2S
  - 1 x 12-bit Camera Interface
  - 1 x SMC (Supports parallel external memory interface)
  - Up to 97 x GPIOs
  

  Note: Some signals are reused and listed with the maximum numbers. For detailed configuration, please refer to the document of Pin-out Description.

• Ready-to-run Linux 4.1 OS

Relative Download and Links You can download relative chip datasheet, products datasheet, user manual, software package from below. Any inquiry, please contact MYIR.   1 ATMEL SAMA5D2 Flayer (Revision A) 372 KB 2 ATMEL SAMA5D2 Datasheet (Revision E) 10.5 MB 3 MYC-JA5D2X CPU Module Overview 1.05 MB 4 MYD-JA5D2X Development Board Overview 1.44 MB 5 MYC-JA5D2X Dimensions 70.3 KB 6 MYD-JA5D2X Base Board Dimensions 170 KB 7 Signals Rounted to SO-DIMM 200-pin Connector 527 KB