- 667MHz Xilinx XC7Z010/020 Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic
- 1GB DDR3 SDRAM (2 x 512MB, 32-bit), 16MB QSPI Flash
- USB_UART, USB2.0 OTG, 1 x 10/100/1000Mbps Ethernet, CAN, HDMI, TF, …
- Onboard Three-axis Acceleration Sensor and Temperature Sensor
- Ready-to-Run Linux Single Board Computer
- Optional Camera and WiFi Modules, IO Extension Cape
The Z-turn Board is a low-cost and high-performance Single Board Computer (SBC) built around the Xilinx Zynq-7010 (XC7Z010-1CLG400C) or Zynq-7020 (XC7Z020-1CLG400C) All Programmable System-on-Chip (SoC) which is among the Xilinx Zynq-7000 family, featuring integrated dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic.
The Z-turn Board takes full features of the Zynq-7010 / 7020 SoC, it has 1GB DDR3 SDRAM and 16MB QSPI Flash on board and a set of rich peripherals including USB-to-UART, Mini USB OTG, 10/100/1000Mbps Ethernet, CAN, HDMI, TF, JTAG, Buzzer, G-sensor and Temperature sensor. On the rear of the board, there are two 1.27mm pitch 80-pin SMT female connectors to allow the availability of 96 / 106 user I/O and configurable as up to 39 LVDS pairs I/O.
The Z-turn Board is capable of running Linux operating system. MYIR has provided Linux 3.15.0 SDK, the kernel and many drivers are in source code. The board is delivered with complete accessory kit including two USB cables, one Ethernet cable, one HDMI cable, one 4GB TF card and one 5V power adapter and product CD-ROM which enables you to start the development quickly when getting the board out-of-the-box. MYIR also offers optional WiFi and camera modules, Z-turn IO Cape for the Z-turn Board. The Z-turn IO Cape provides many peripheral signals and interfaces including ADC, GPIO, LCD, Camera and three Pmod interfaces.
The Z-turn Board is an excellent development platform for evaluating and prototyping for Zynq-7000 SoC. It can also be used as a System-on-Module (SOM) for your next embedded design; typical applications are Industrial Automation, Test & measurement, Medical Equipment, Intelligent Video Surveillance, Aerospace and military, etc.
Xilinx XC7Z010-1CLG400C (Zynq-7010) or XC7Z020-1CLG400C (Zynq-7020)
- NEON™ & Single / Double Precision Floating Point for each processor
1GB DDR3 SDRAM (2 x 512MB, 32-bit)
16MB QSPI Flash
TF card interface
1 x 10/100/1000M Ethernet
1 x CAN
1 x Mini USB2.0 OTG
1 x USB-UART debug interface
1 x HDMI (supports 1080p resolution)
We are using evaluation version of Xylon's logiCVC-ML and logiCLK IP core.
Brought out via two 1.27mm pitch 80-pin SMT female connectors
63mm x 102mm x 1.6mm (8-layer PCB design)
USB power supply or DC 5V/2A
Onboard three-axis acceleration sensor and temperature sensor
2 x Buttons (1x Reset, 1 x User)
4-channel toggle switch
5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED)
1 x Buzzer
|OS support||Linux 3.15.0|
Evaluation and Prototyping for Zynq-7000 AP SoC
Test & measurement
Intelligent Video Surveillance
Aerospace and military
Z-turn Board in the Video
Z-turn IO Cape
The Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.
The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix?-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex?-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.
Dual ARM? Cortex™-A9 MPCore™ with CoreSight™
NEON™ & Single / Double Precision Floating Point for each processor
32 KB Instruction, 32 KB Data per processor
DDR3, DDR3L, DDR2, LPDDR2, 2x Quad-SPI, NAND, NOR
2x USB 2.0 (OTG), 2x Tri-mode Gigabit Ethernet, 2x SD/SDIO
28K Logic Cells
74K Logic Cells
85K Logic Cells
125K Logic Cells
275K Logic Cells
350K Logic Cells
444K Logic Cells
4 (6.25 Gb/s)
up to 4 (12.5 Gb/s)
up to 16 (12.5 Gb/s)
up to 16 (12.5 Gb/s)
up to 16 (10.3125 Gb/s)
Z-turn Board Function Block Diagram
Z-turn Board Dimension Chart
gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-50)
First boot program including FSBL, bitstream and u-boot
Customized kernel for MYS-XC7Z010/020
USB OTG driver
Gigabit Ethernet driver
MMC/SD/TF card driver
XYLON LCD driver
Three-axis acceleration sensor driver
Temperature sensor driver
Ramdisk system image
Ubuntu Desktop 12.04
● 결제일로부터 1~3주 안에 배송됩니다.
● 제조사 재고가 부족하여 3주 안에 배송이 어려울 경우 메일로 안내해 드리니 참고하시기 바랍니다.
교환 및 반품안내
● 본 상품은 해외 재고 상품으로 기본적으로 교환 및 반품 처리가 어렵습니다.
● 상품에 따라 교환 및 반품 처리가 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
● 본 상품은 해외 재고 상품으로 기본적으로 환불 처리가 어렵습니다.
● 상품에 따라 환불이 가능한 경우 비용이 수반되며 이니프로 고객센터에 연락하여 처리하시기 바랍니다.
● 제조사별로 A/S정책이 상이하니 하단 고객센터로 문의 주시기 바랍니다.
글 작성시 설정한 비밀번호를 입력해 주세요.확인
상품이 장바구니에 담겼습니다.