Description 

The MYD-C7Z015 development board is a programmable, low-cost and high-performance board designed by MYIR. It integrates Xilinx XC7Z015 (Z-7015) Dual-core ARM Cortex-A9 Processor with Xilinx 7-series FPGA logic from Xilinx Zynq-7000 family, with one PCIe interface and one SFP transceiver module interface on the base board to allow users to expand numerous of high-speed devices. It’s typically applications ranges from Industrial Automation, Test & measurement, Medical Equipment, Aerospace to military and more others.

The MYD-C7Z015 development board is using the MYC-C7Z015 CPU Module as the core controller board which integrates the core components including the Zynq-7015 processor, 1GB DDR3 SDRAM, 4GB eMMC, 32MB quad SPI Flash, a Gigabit Ethernet PHY, a USB PHY and external watchdog. The MYC-C7Z015 CPU Module is mounted on to the MYD-C7Z015 base board through two 0.8mm pitch 140-pin Board-to-Board connectors. Compared with the Zynq-7010, the processor Zynq-7015, has more logic cells, Block RAM and DSP slices, which makes the board obtain more powerful programmable function for users.

The MYD-C7Z015 development board takes full features of the Zynq-7015 SoC to create a rich set of peripherals to the base board through headers and connectors including one RS232 serial port, four USB Host ports, one Gigabit Ethernet port, CAN, HDMI, LCD/Touch screen, TF card slot, RTC, one XADC header to allow you take advantage of Xilinx XADC and one low-pin count FMC connector to allow various FMC cards for custom I/O options. Especially, it has one SFP transceiver module to keep higher transmission speed and better stability during your evaluation, as well as one PCIe interface, which contributes the data transmission speed to a high frequency when customers using the board.

MYD-C7Z015 Development Board

The MYD-C7Z015 development board is preloaded with Linux and delivered with necessary cable accessories. It is a high-performance and low-cost development platform for evaluation and prototype based on Xilinx Zynq-7000 All Programmable SoC family.

Features

Mechanical Parameters

• Dimensions: 190mm x 110mm (base board), 75mm x 55mm (CPU Module)
• PCB layers: 4-layer design (base board), 12-layer design (CPU Module)
• Power supply: 12V/0.5A (base board), 5V/0.5A (CPU Module)
• Working temp.: 0~70 Celsius (commercial grade) or -40~85 Celsius (industrial grade)

The MYD-C7Z015 Controller Board (MYC-C7Z015 CPU Module)

SoC

• Xilinx XC7Z015-2CLG485I (Zynq-7015)

  - Four high-speed SerDes transceivers up to 6.25Gbps
  - Four PCIe Gen2 hardened, integrated IP blocks
  - 766MHz ARM® dual-core Cortex™-A9 MPCore processor (up to 866MHz)
  - Integrated Artix-7 class FPGA subsystem with 74K logic cells, 46,200 LUTs, 160 DSP slices
  - NEON™ & Single / Double Precision Floating Point for each processor
  - Supports a Variety of Static and Dynamic Memory Interfaces

Memory

• 1GB DDR3 (2 x 512MB, 32-bit)
• 4GB eMMC
• 32MB QSPI Flash (16MB is optional)

Peripherals and Signals Routed to Pins ( MYC-C7Z015 pin-out description)

• 10/100/1000M Ethernet PHY
• One USB PHY
• External watchdog
• Three LEDs
- One blue LED for power indicator
- One red LED for FPGA program done indicator
- One green user LED

• Two 0.8mm pitch 140-pin board-to-board expansion connectors bring out below signals:
  - One Gigabit Ethernet
  - One USB OTG 2.0
  - Up to two Serial ports
  - Up to two I2C
  - Up to two CAN BUS
  * Serial ports, I2C and CAN signals will be reused in PS part, or implemented through PL pins
  - One SPI (can be implemented through PL pins)
  - ADC (one independent differential ADC, 16-channel ADC brought out through PL pins)
  - One SDIO
  - Bank 13 (PL I/O configurable as up to 18 LVDS pairs and 1 single-ended I/O or 37 single-ended I/O)
  - Bank 34 (PL I/O configurable as up to 24 LVDS pairs and 2 single-ended I/O or 50 single-ended I/O)
  - Bank 35 (PL I/O configurable as up to 24 LVDS pairs and 2 single-ended I/O or 50 single-ended I/O)
  - Bank 112 (4 GTP serial transceivers, 2 reference clock input)

The MYD-C7Z015 Base Board (MYB-C7Z015)

MYD-C7Z015 Base Board (MYB-C7Z015)

PS Unit

• Four USB 2.0 Host ports (through USB Hub)
• One RS232 (DB9 port)
• One TF card slot (bootable)
• One CAN interface
• One 10/100/1000M Ethernet
• One 2.54mm pitch 14-pin JTAG interface (PS, PL reused)
• Battery backed RTC
• One User Button (One I2C, can be connected to LCD and Resistive Touch Screen)
• Jumpers
- One for booting selection from TF card or QSPI
- One for JTAG selection for using PS and PL reused or independent JTAG configured through PL pins
- One for selection if adding FMC module to JTAG

PL Unit

• One XADC interface
• One Xilinx standard LPFMC interface
• One HDMI interface (16-bit YCrCb, support 1080p display, do not support audio)
• LCD/Touch screen interface (16-bit RGB, signals reused with HDMI, supports resistive and capacitive touch screen)
• Two LEDs (one for FMC module detection, one for power indicator)
• Three-channel PMoD
• One SFP transceiver module with RJ45 interface (SFP-GE-T module, up to 1000Mbps)
• One PCIe interface

OS Support

• Linux 3.15.0

MYD-C7Z015 in the Video

- Hello_world based on MYIR Xilinx Zynq-7015 Board

http://www.myirtech.com/xilinxseries.asp

Z-turn Lite Single Board Computer (based on Zynq-7007S / Zynq-7010)

Z-turn Board Single Board Computer (based on Zynq-7010 / Zynq-7020)

MYD-C7Z010/20 Development Board (MYC-C7Z010/20 CPU Module as core board)

MYD-Y7Z010/007S Development Board (MYC-Y7Z010/007S CPU Module as core board)

MYD-CZU3EG Development Board (MYC-CZU3EG CPU Module as core board)  

Hardware Features 

The Zynq™-7000 family of devices combines the software programmability of a Processor with the hardware programmability of an FPGA, resulting in unrivaled levels of system performance, flexibility, scalability while providing system benefits in terms of power reduction, lower cost with fast time to market. Unlike traditional SoC processing solutions, the flexible programmable logic of the Zynq-7000 devices enables optimization and differentiation, allowing designers to add peripherals and accelerators to adapt to a broad base of applications.

The Zynq-7000 AP SoC leverages the 28nm scalable optimized programmable logic used in Xilinx’s 7 series FPGAs. Each device is designed to meet unique requirements across many use cases and applications. The Z-7010, Z-7015, and Z-7020 leverage the Artix?-7 FPGA programmable logic and offer lower power and lower cost for high-volume applications. The Z-7030, Z-7035, Z-7045, and Z-7100 are based on the Kintex?-7 FPGA programmable logic for higher-end applications that require higher performance and high I/O throughput.

Zynq-7000 Devices

MYD-C7Z010/20 Function Block Diagram

Dimensions of MYD-C7Z010/20

Software Features

The MYD-C7Z010/20 development board is preloaded with Linux 3.15.0. MYIR provides software package in product disk along with the goods delivery. The software package features as below:

Relative Download and Links

You can download relative chip datasheet, products datasheet, user manual, software package from below. Detailed technical data available on request.

1	Xilinx Zynq-7000 Overview	658 KB
2	MYD-C7Z015 Development Board Overview	1.31 MB
3	MYC-C7Z015 CPU Module Overview	982 MB
4	MYC-C7Z015 Pin-out description	145 KB
5	MYD-C7Z015 Base Board Schematic	219 KB