The MYC-CZU3EG/4EV/5EV CPU Module is a powerful MPSoC System-on-Module (SoM) based on Xilinx Zynq UltraScale+ ZU3EG or ZU4EV or ZU5EV which features a 1.2 GHz quad-core ARM Cortex-A53 64-bit application processor, a 600MHz dual-core real-time ARM Cortex-R5 processor, a Mali400 embedded GPU and rich FPGA fabric. It has 4GB DDR4, 4GB eMMC and 128MB QSPI Flash default memory configuration on board as well as integrated Ethernet PHY, USB PHY and Intel Power Module to provide control and processing capabilities as a minimum embedded system. It offers easy access to signals carried to or from the MPSoC through two Samtec 0.5mm pitch 160-pin Razor Beam High-Speed headers. It is ready to run PetaLinux OS and comes with detailed documentations and software package.

 

 

MYC-CZU3EG/4EV/5EV CPU Module Top-view 

 

 

MYC-CZU3EG/4EV/5EV CPU Module Bottom-view
 

Developers can simply design their own base board using the MYC-CZU3EG/4EV/5EV as the embedded controller which can help save time and reduce cost. MYIR has a reference base board design for customer evaluation and prototype. The whole development board MYD-CZU3EG/4EV/5EV takes full features of the Zynq UltraScale+ XCZU3EG-1SFVC784 / XCZU4EV-1SFVC784 / XCZU5EV-2SFVC784 MPSoC to have explored a robust set of peripherals for a wide variety of applications including the Internet, cloud computing, Data center, Machine Vision, Military facilities, Flight navigation and other embedded applications.
 

 

 

MYD-CZU3EG/4EV/5EV Development Board (delivered with active heatsink on CPU Module by default)

Features

Mechanical Parameters

• Dimensions: 60.00 mm x 52.00 mm
• PCB Layers: 12-layer design
• Power supply: 3.3V
• Working temp.: 0~70 Celsius (commercial grade, MYC-CZU3EG), -40~85 Celsius (industrial grade, MYC-CZU4EV/5EV)

MPSoC

• Xilinx Zynq UltraScale+ XCZU3EG-1SFVC784 / XCZU4EV-1SFVC784 / XCZU5EV-2SFVC784 MPSoC
  - 1.2GHz 64 bit Quad-core ARM® Cortex™-A53
  - 600MHz Dual-core ARM® Cortex™-R5 processor
  - ARM Mali™-400MP2 Graphics Processor
  - 16nm FinFET+ FPGA fabric

Memory

• 4GB DDR4 SDRAM (64bit, 2400MHz)
• 4GB eMMC Flash
• 128MB QSPI Flash

Peripherals and Signals Routed to Pins ( MYC-CZU3EG/4EV/5EV Pinouts Description)

• Gigabit Ethernet PHY
• USB PHY
• Intel Power Module
  
• Clock Generator
  
• Watchdog
• Four LEDs
  - One yellow LED for ERROR_STATUS indicator (indicate a secure lockdown state)
  - One yellow LED for ERROR_OUT indicator (Asserted for accidental power loss, hardware error)
  - One green LED for PS_Done indicator (indicate the pl configuration is done)
  - One green LED for PS_INIT indicator (indicate the ps is initialized after a power-on reset)
• Two Samtec 0.5mm pitch 160-pin Razor Beam High-Speed headers bring out
  - 4 PS GTR transceivers along with 2 GTR reference clock inputs
  - PS JTAG interface, USB 2.0 interface, Gigabit Ethernet interface and etc.
  - 4 PL GTH transceivers along with 1 GTH reference clock input (only for Zynq UltraScale+ EV Devices)
  - 156 user PL I/O pins

 

OS Support

• PetaLinux 2020.1

Other MYIR's Xilinx Products

http://www.myirtech.com/xilinxseries.asp

Z-turn Board Single Board Computer (based on Zynq-7010 / 7020)

Z-turn Lite Single Board Computer (based on Zynq-7007S / Zynq-7010)

MYD-C7Z015 Development Board (MYC-C7Z015 CPU Module as core board)

MYD-Y7Z010/20 Development Board (MYC-Y7Z010/20 CPU Module as core board)

MYD-C7Z010/20 Development Board (MYC-C7Z010/20 CPU Module as core board)

FZ3 Card - deep learning accelerator card (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)

FZ5 Card (AI Accelerator Card based on Zynq UltraScale+ ZU5EV MPSoC) 

VECP Starter Kit - a complete Vision Edge Computing Platform (based on Xilinx Zynq UltraScale+ ZU3EG MPSoC)