▶ Product Subtitle

Zynq UltraScale+ 5EV MPSoC development board for Smarter Vision

▶ Product Description

The Genesys ZU-5EV is designed with high-definition video in mind, and is ideal for multimedia, automotive ADAS, surveillance, and other embedded vision applications. The board features a Xilinx Zynq® UltraScale+™ MPSoC (Multi-Processing System on Chip) EV device. The ZU5EV is equipped with a quad-core Arm® Cortex®-A53 applications processor, dual-core Cortex-R5 real-time processor, Mali™-400 MP2 graphics processing unit, 4KP60 capable H.264/H.265 video codec, and 16nm FinFET+ programmable logic.

The excellent mix of on-board peripherals, upgrade-friendly DDR4, Mini PCIe and microSD slots, multi-camera, a video codec, and GTH transceivers allowing HDMI Source, Sink and 10G SFP+ to support a wide number of use-cases. Different specialized ports, including FMC Gigabit expansion ports, Pmod and high-speed SYZYGY-compliant expansion module ports for our new Zmods, enable flexible expansion and easy access to a wide ecosystem of add-on modules, perfect for silicon evaluation and rapid prototyping.

▶ Features

• XCZU5EV-SFVC784-1-E (with heat sink and fan)
• Quad-core ARM® Cortex-A53 Application Processing Unit
• Dual-core ARM® Cortex-R5 Real-Time Processing Unit
• Mali-400 MP2 graphics processing unit
• 256K logic cells
• Memory:
• 4 GiB DDR4 SODIMM module
• ISSI 256 MB SNOR Flash
• MicroSD Card Slot
• Peripheral connectivity:
• USB Type-C 3.1 Gen1 Dual-Role Device
• MiniPCIe / mSATA dual slot
• USB 2.0 Host
• Network connectivity:
• 2.4 GHz on-board WiFi
• 1G w/IEEE 1588 Ethernet
• SIM card slot
• WLAN/WWAN/LoRa: option – MiniPCIe
• SFP+ 10G Ethernet
• Multimedia:
• 1.2a Dual-Lane Display Port
• 2x Pcam Dual-Lane
• Audio Codec
• H.264/H.265
• HDMI Source
• HDMI Sink
• Expansion:
• 1x FMC expansion connector
• 1 x FMC Gigabit
• 1x SYZYGY port
• 4x Pmod ports
• GPIO: LED, Buttons, Switches
• Kits include
• Power Supply, Desktop, 12V, 8A, w/PCIE Connector
• IEC cable, US, 1.2 meter
• IEC cable, EU, 1.2 meter
• USB A TO MICRO B CABLE
• Cable, USB, A to Type C, 15CM
• JTAG HS1
• Voucher for the Xilinx MIPI CSI-2 IP cores

▶ Support Materials

• Datasheet
• Resource Center

▶ Demo / Project Links

• Installing Vivado, Xilinx SDK, and Digilent Board Files
• Note: When installing Vivado, make sure to include support for Zynq Ultrascale+ parts.
• Getting Started with Vivado IP Integrator
• Note: This guide was originally written for non-Ultrascale Zynq boards and boards using Microblaze. The flow for Ultrascale Zynq is largely the same as non-Ultrascale Zynq. The “Zynq Ultrascale+ MPSoC” IP core should be
used in place of the “ZYNQ7 Processing System”
• Getting Started with the Genesys ZU
• Genesys ZU Out-of-Box Vivado Project
• Genesys ZU Out-of-Box Petalinux Project
• Genesys ZU 5EV HDMI Demo Project

▶ 3 Target Applications

• Situational Awareness
• Surveillance/Reconnaissance
• Smart Vision
• Image Manipulation
• Graphic Overlay
• Human Machine Interface
• Automotive ADAS
• Video Processing
• Interactive Display

▶ What's Included

• Genesys ZU-5EV Board
• 12V, 8A power supply
• IEC cable with European plug
• IEC cable with US plug
• USB A to micro B programming cable
• USB A to Type C cable
• JTAG HS1 programmer and cable
• microSD card with the Out-of-Box Petalinux Image (loaded into the Genesys ZU's microSD card slot), with a case
• Voucher for license for Xilinx's MIPI CSI-2 IP cores